Tile is currently a fairly popular finishing material. Its use is no longer limited to the kitchen or bathroom. It is used not only in apartments, but also in public places, however, when working with such a finishing material, it is difficult not to avoid trimming or cutting it. For this, tile cutters are most often used. The editors of the site "bestx.htgetrid.com/en/" have prepared for you an overview of the best tile cutters for 2020.
Content
What is the tool?
A tile cutter is a device for cutting building material such as tile, stone or glass. Often, this device has a measuring ruler, which makes it possible to cut off unnecessary pieces of tile without prior marking. The choice of parameters for this tool depends on the frequency of use of the tile cutter.
The tiles are cut using a diamond disc, the surface of which is water-cooled. The principle of operation is similar to a circular saw. Thanks to diamond dusting on the disc, it is possible to cut not only tiles, but also stone, and even concrete and ceramics. The supply of water to the working area helps to cool the disc and also reduces the formation of dust, which is very useful in work.
Water prevents the formation of chips on the tiles, and also does not damage the glaze. Water cooled units are the most practical.
Varieties of tile cutters and how to choose the right tool
This tool can be divided into two categories:
- Mechanical.
- Manual.
Each type of tile cutter has its own subspecies.
Most often, a manual tile cutter is purchased in cases where the thickness of the tile is small and a small amount of work needs to be done. In the event that you have plans to lay tiles at a professional level, then a more multifunctional device would be the best choice.
If you do not have a desire to buy a device for one tile laying, then a grinder with nippers is also suitable. True, in such a situation, the quality of the cuts on the tiles will be low. In the process of performing such work, a large amount of dust will be generated, which will subsequently complicate cleaning.
Mechanical tile cutters
When using this device, no power supply is required. All the work will be done by an installer and mechanic. Currently, a number of different mechanical tile cutters can be found in specialized stores.
The first option is a desktop device. The main purpose of this tile cutter is a straight cut device, in some cases it is used for cutting glass. Tiles up to 15 mm thick can also be cut with this device.
The design of the device is:
- Cutting roller;
- Presser foot;
- Break lever;
- Carriage;
- Spring table.
The cutting process is carried out as follows:
- The tile is laid on the table and markings are applied to it;
- The marking is carried out with a cutting roller with some effort;
- The tile is broken along the cut line.
The final result will depend on how strong the pressure was when cutting the tiles.The tabletop device allows you to cut with a straight cut. In the event that it has a circular cutter, it can be classified as a multifunctional tool.
This function allows you to make holes of different diameters for pipes, switches or sockets. Such a device has a measuring ruler, which allows you not to apply preliminary markings to tiles or other material.
Handheld device
Such a tool is a type of mechanical tile cutter and has two subspecies. The first category is wire cutters. A fairly primitive tool that is necessary for curly cutting tiles. The thickness of such tiles should not exceed 8 mm. This tool allows you to create an unusual shape of the indentation, but without some skills it is not very easy to work with it.
It is best to do everything carefully and consistently. It is for this reason that experts recommend to start training on unnecessary scraps and only then proceed to good tiles.
The second category of tile cutter is the cutting roller. This tool allows you to cut tiles up to 10 mm thick. Due to its compact dimensions, it can be used in any position, for example:
- Aweigh;
- On the floor;
- On the table.
A beginner should not experiment with this and it is better to choose a pruning method on the floor. Such a device allows you to perform both a straight cut and a figured one. The principle of operation of this device is similar to that of a tabletop tile cutter.
Electric tile cutters
These devices are designed for cutting tiles, stone or glass thicker than 15 mm. With this tool, it is possible to perform both straight and curved cuts, as well as trimming with a diagonal cut.
The use of such a tile cutter reduces the possibility of getting a marriage. It does not generate dust and requires minimal effort. Device device:
- Table;
- Head with diamond disc;
- Electric wire.
Due to the fact that while working with such a tool, it heats up itself and heats up the material, there are special cooling systems that are part of the design. The water-cooled electric tile cutter is a great choice for tough jobs. The cooling system works as follows:
- Water gets on the diamond disc;
- The water cools the material and the disc.
Water helps extend tool life and also reduces dust emissions.
The advantages of an electric tile cutter:
- Allows you to make straight lines when trimming;
- Reduces the appearance of chips;
- Allows you to trim at an angle;
- Less dust emission;
- Great performance;
- Safety;
- Variability in trimming tiles;
- Ability to cut short sections of tiles.
In addition to the advantages, this device has some disadvantages:
- Cannot cut with a curved path;
- High price.
When choosing a particular tool for yourself, it is worth thinking for what purposes you are purchasing it. The simplest option is suitable for home renovation. In the event that you plan to perform large volumes of work, you should consider purchasing a functional product.
How to choose a tile cutter?
There are several general rules for choosing this electric tool, no matter what its purpose.
The first thing worth paying attention to is the presence of various defects that can be detected visually. When you are shown the operation of the device, you should observe how the engine works, whether there are additional vibrations. The build quality and condition of the instrument should not be overlooked either.
The second criterion is engine power. The power is selected depending on the thickness of the material that you need to cut. The thicker the material, the more powerful the engine must be.
The third point is cutting at an angle. Adjusting the angle you want should be easy.The process should be easy and fast, and after adjustment there should be no errors in the cutting process.
The quality of the diamond blade is the fourth important factor when buying a tile cutter. It is worth checking its quality as it is the most important part of the device.
The fifth factor is the availability of spare parts. Before purchasing, it is worth asking if the store always has spare parts for the device, because in the event of a breakdown this is an important point. If it is rather difficult to find them for a given model, then you should refuse to buy it and choose more popular models. For such devices, spare parts are easier to get.
Choosing a manual tile cutter
Focusing on these models, you should avoid making mistakes when choosing. Therefore, we draw your attention to what criteria it is important to know about.
The first is how solid the frame is. In general, the tool platform should be made of metal and of sufficient thickness. If, when looking at the model, you see that the steel is thin, then you should refuse to buy it, since it will not last long, and you will only waste your money.
The second criterion is the length of the device. It is worth choosing long models because they have an advantage over short ones. Such devices make it possible to perform an undercut and diagonally.
The third criterion is smoothness. Ask the store to demonstrate how the device works. You must make sure that the device runs smoothly, and for this, its design must be bearings.
It is worth remembering that the roller tile cutter cannot be sharpened and will have to be completely replaced, so they are not bought for long-term use.
The inconvenience in using such a device also lies in the fact that for cutting the tiles, it must be marked, since they do not have a ruler.
The tile must be wetted before work in order to make the cut easier. Basically, the choice in favor of such products is made by novice craftsmen or those who carry out repairs with their own hands.
Top manufacturers
One of the most famous tool manufacturers is DeWALT. It was founded in 1922. It is an American brand that manufactures power tools for professional workers. The color scheme of all instruments is yellow-black. The company manufactures devices with a battery.
Another representative of the American market is Stanley. It was founded in 1843. The tools of this brand are in great demand. The company produces high-quality and durable products, has established itself as a reliable manufacturer of professional tools.
Rating of tile cutters
DeWALT D24000
DeWALT D24000 is in the first place. It belongs to electrical appliances. It allows you to cut not only tiles, but also porcelain stoneware and stone. It has a powerful motor and water cooling. There is a possibility of angular cutting of the material.
Has a smooth descent and two-way water supply.
Device characteristics:
| Parameters | Specifications |
|---|---|
| Power | 1 600 W |
| The disk rotation speed is | 4200 rpm |
| The permissible tilt angle is | 45 degrees |
| The diamond blade has a diameter | 25 cm |
| The weight is | 32 kg |
| Noise level | 90 dBA |
Advantages:
- Protective plastic casing;
- The ability to cut not only tiles;
- Powerful;
- Trimming at an angle.
Disadvantages:
- High price.
The average price for an instrument is 90 thousand. According to buyers, this tile cutter is one of the most reliable and durable. Its high cost is fully justified in the process of working with the tool.
BATTIPAV Super Pro 900
In second place is the BATTIPAV Super Pro 900. This model belongs to mechanical tile cutters. This device allows you to cut large enough material. Build quality is good. Resistant to use on any surface. Even ceramic and porcelain stoneware can be cut.
Advantages:
- Good edge;
- Long lasting;
- Enlarged section.
Disadvantages:
- The cost of the product is too high.
DeWALT DWC 410
Third place goes to the DeWALT DWC 410. It is a hand-held tile cutter that is considered the leader among hand tools due to the fact that it is quite functional. This device is produced with the function of cutting thickness adjustment. This allows it to be used in many areas, not just for laying tiles.
Specifications:
| Parameters | Specifications |
|---|---|
| Power | 1 300 W |
| The disk rotation speed is | 1,300 rpm |
| The diamond blade has a diameter | 11 cm |
| The weight is | 3 Kg |
Advantages:
- Ease of use;
- Functionality;
- Cold disk cooling;
- Maneuverability.
Disadvantages:
- Difficulty with the selection of disks.
HUSQVARNA TS 66 R
The fourth place is occupied by HUSQVARNA TS 66 R. It belongs to electric tools. A professional tool is produced under this brand, therefore this model is necessary only for those who are engaged in laying tiles at this level. It is not needed as a home appliance.
The model is water-cooled, and the strength of the water flow can be adjusted. The tool has supports, which makes it possible to cut the material well.
Specifications:
| Parameters | Specifications |
|---|---|
| Power | 800 watts |
| The disk rotation speed is | 2 800 rpm |
| The diamond blade has a diameter | 20 cm |
| Noise level | 80 dBA |
| The weight is | 41 kg |
Advantages:
- Cooling with water;
- Less dust emission during operation;
- Regulation of the force of water supply;
- Stability.
Minuses:
- Lack of a ruler.
The average cost of this model is 35 thousand. This price is low enough for a professional tool.
BISON EXPERT on bearings 33195-60
The fifth place is taken by ZUBR EXPERT on bearings 33195-60. This model is a modification of the ZUBR 33195-60 manual tile cutter. This tool is perfect for beginner tilers. The build level is quite high. The device turned out to be reliable and compact. It is possible to smoothly move the carriage, thanks to the presence of bearings.
The cost is also attractive. The weight of the product is small (only 6 kg), which allows you to make an incision up to 3 cm deep.
Advantages:
- Allows you to make a long cut;
- Decent cutting depth;
- Low tool cost;
- Reliability;
- Build quality.
Disadvantages:
- The roller may play.
Anchor Corvette-464
The sixth place is occupied by the Enkor Corvette-464 electric tile cutter. Instrument from a domestic manufacturer. Refers to professional devices. Allows you to cut both straight and oblique cuts. Allows you to make an incision 50 cm long.
Specifications:
| Parameters | Specifications |
|---|---|
| Power | 800 watts |
| The disk rotation speed is | 2 850 rpm |
| Manufacturing material | metal |
Advantages:
- Low cost;
- There is a water-cooled disk;
- Light weight of the model;
- Compact;
- The presence of a protective casing;
- Angle stop included.
Disadvantages:
- Unstable;
- Low power model.
This model can be purchased at a price of 11 thousand rubles.
Which company is the best tool, everyone decides for himself, depending on the front of the work that needs to be done. There is a buyer for each device, so it's not worth making a critical judgment about this or that model right away.
