⚙ Best Backhoe Loaders 2020

Not a single construction work is complete without the use of special equipment. When a person needs to dig a deep trench, it is unlikely that he will hire thousands of workers and buy shovels, it is much easier to rent or buy a backhoe loader. This unit is a hybrid design, its power depends on the tasks. Such a vehicle is completely versatile, since it can be used both in the village and in the city.

The excavator is not sensitive to temperature extremes or weather variability. The main distinguishing feature of the product is its maintainability, efficiency, availability of consumables and attachments. In addition, it has an affordable price compared to specialized equipment and does not require constant maintenance, which allows you to reduce your budget.

However, many people have a question: "how to choose a loader?" There are thousands of different models on the market, but in order to understand which equipment is better to pay attention to, the editors of the site "bestx.htgetrid.com/en/" have prepared for you a rating of the best backhoe loaders for 2020.

MMM - multifunctionality, mobility and maneuverability

These three parameters perfectly describe all the advantages of this product. But best of all, the advantages and disadvantages are determined by the field of operation. If a person plans to carry out repair and construction work in the city, then it is not recommended to use special-purpose equipment, because it will have nowhere to turn around, especially in small yards. In addition, there is the possibility of damage to the asphalt from the tracks. A small excavator can solve this problem in a few minutes. Digging a trench and working as a pipelayer - all this can be done with one device, while the person does not have to pay a lot of money to buy auxiliary equipment.

Also, the device can be used as a hydraulic hammer, which will allow you to gouge a small area near the footpath, without hitting it, which is very important. The excavator is also used for cleaning the area when it is covered with snow. It is lightweight and mobile, which allows you to quickly clean the area of ​​pollution, doing it efficiently and in the shortest possible time. Another positive point is that the equipment can easily travel tens of kilometers without using auxiliary equipment, and after that it can function normally, and also not lose the warranty period.

When used in an urban setting or in the country, this product takes the first place in terms of the cost of work, from which the demand for it is constantly growing. The same cannot be said about highly specialized equipment, which has a high price tag per hour of work. In addition, the equipment does not need expensive maintenance at the technical station, and also does not consume a lot of fuel.

Of course, if it is necessary to carry out a huge amount of work, then this technique will be useless, but no one hires such equipment for such purposes.More often he is given preference when it is necessary to carry out a small operation, in a place that is difficult to access, for complex equipment. In other cases, most customers will prefer the latter. However, this by no means renders backhoe loaders unnecessary. On the contrary, it is a great accessory that can do a lot.

A tool for true professionals

Due to the wide multifunctionality of the product, EP is constantly in demand for various construction works. Especially when performing local tasks. Before 2014, most people started a private business using electronic signature. So more than 50% rented it to some construction companies. But recently, this balance has been violated, and most enterprises prefer to own their own equipment. Despite this, a large percentage of private traders retained their positions and still continue to hand over this tool to organizations providing construction and repair work.

Oddly enough, due to the popularity of this device, the profession of an operator of an excavator-loader began to be in great demand.

What to look for when choosing a new loader?

Despite the fact that it is always easier to buy new equipment, when choosing an ES there are a number of nuances that will not allow you to do it instantly. First, a person needs to look at the company, learn more about the brand, etc. The following steps are often advised by professionals:

• Find a good and trusted distributor located in a specific region. It is important to remember that the further away the supplier's office is located, the more difficult it will be to transport spare parts from the warehouse. This will increase downtime, which will negatively impact performance. In cases where the official dealer is located in another region or does not have an elementary base of spare parts, then it is not advisable to buy equipment from this organization. Of course, a person can buy, but it is important to remember that transportation costs will be borne by the client, not the company.
• The second step is to collect information on the prices of spare parts and consumables, which are always needed by backhoe loaders. It is also important to decide where exactly the person will buy additional parts. Here it is necessary to remember about the reliability of the seller and his competence, that is, it is desirable that he has the appropriate documentation that confirms the quality of the goods. This is worth understanding, as counterfeit goods often come across on the market.
• Further, it is important for a person to decide on the model that he is going to constantly exploit. Most firms offer various options for the execution of electronic signatures. Each of the presented backhoe loaders can either have minor differences or be the complete opposite of the product.
• In addition, it is important to remember that there are several modifications for some models, they may differ both in the width of the wheels and in the way of control. It is important to approach this issue with caution. Because there is a possibility that a person can make a mistake when choosing and buy inappropriate equipment.

The most popular criteria for choosing a new ES are described above. Compliance with these aspects will allow you to choose a more reliable and high-quality option.

Purchase from hands

The first thing to do when buying this kind of equipment from your hands is to ask yourself again if it is really necessary. Because no one can give good guarantees that the ES will last at least a year and be able to recoup its cost. It is important to make such a decision only based on the goals set:

• If a person understands that his equipment will not be heavily loaded and will rarely be used, then buying a used one is a suitable option. The only caveat is long-term payback.
• But when a person buys such equipment only because of the desire to save money, then this is a really good moment to think.

Whatever the decision, it is also necessary for an ordinary client to know about the correct purchase of a backhoe loader from his hands.Such advice will never be superfluous, and will also help to coordinate in choosing the best model that the aftermarket can offer.

Verification of documents and equipment

When a person buys from a trusted company, verification is easy. But you still need to remain vigilant. It will not be superfluous to have information about the duration of the company's work, whether it has its own website, the availability of certificates and various documents that allow the sale of equipment.

The second step is checking the technical passport of the product. It is important to understand that duplicates cannot be considered, if the customer says that he only has this piece of paper, then it is better to postpone the meeting until a more convenient moment or even look for another supplier. You cannot blindly believe every word if it is not documented.

After receiving a passport, the first thing to do is to verify the technical information that is posted there. There shouldn't be any mistakes or inconsistencies. Because if you do not notice this, a person may have problems when registering the unit.

We must not forget about the seller himself and his information must also be checked. The identity card must be original and not a copy. As an additional precaution, it is worth specifying in the sales contract the scenario of the seller's actions (refund of full profit or partial profit) in the event that the equipment is pledged. It should also be remembered that the date of the change of ownership must coincide with the one indicated in the passport.

These aspects relate to the documentary part, the second, no less important, is practical actions. A person needs to look at the operating hours. It is important to remember that the average operating time is 1500 per year. If the unit has been owned for ten years, but the operating time there is less than 6000, then this is a reason to think about the honesty of the seller. If old models are being checked, then certain difficulties may arise there, which will make it difficult to refute or confirm the information. Some modern models are equipped with a special sensor that sends information about the number of engine hours to a remote server. Only the company that sold the digital signature has access to this site.

Next, the engine check begins. It should not raise any doubts about its suitability. The appearance must inspire confidence, it is advisable to check the fasteners. It is not necessary to check every bolt; it is enough to make sure that the main parts are tightened. It will also be a pleasant moment if the technician has good hoses that were ordered from an official supplier. The engine should not emit extraneous sounds and emit huge clouds of smoke. It is best to carry out tests "for cold", without warming up, this is the only way to reveal all major flaws, if any.

After checking the "heart" of the transport, it is important to check the hydraulics. The pump should not emit unnecessary sounds, and work should be carried out without jerking. You should also take measurements in the hydraulic system, for these purposes you will need a special tester.

Next, the level of all liquids is checked. Detecting oil, fuel or coolant leaks. Check for cracks and chips. Checking the working joints, no scuffs are allowed. Backlash and signs of wear are inevitable, but it is better if they are minimal. As soon as the buyer starts the car, it is important to look at the dashboard, no icons should be lit.

Rating of the best expensive (from 6,000,000 rubles) backhoe loaders

Case 695 ST

9-ton machine, which will allow you to carry out work of any complexity in a minimum period of time, which increases its efficiency significantly. A 4-cylinder engine is used for operation, with a maximum power of 89,000 W or 120 hp. Manufacturer's warranty - 12 months.

The average price is 7,700,000 rubles.

Advantages:

Disadvantages:

NEW HOLLAND B115C

An excellent excavator-loader of the European type, weighing 9.2 tons. The product is completely different from the Russian representatives, and for the better. The equipment allows to carry out almost all types of operations in a short period of time. The cab is heated, which will save the operator in the winter season. 10 LED headlights provide quality lighting at any time.

The average price is 7,200,000 rubles.

Advantages:

Disadvantages:

Caterpillar 428F

The best product from a reputable manufacturer. Machine weight - 8.5 tons, lifting capacity - 3.8 tons. This backhoe loader is capable of surprising even a seasoned driver. All conveniences for comfortable work are located inside the cab. Nothing was left without attention, even the engine does not make a loud sound and does not distract from business. All connections, sensors, hoses and even bolts are selected for active use.

The average cost is 6,812,000 rubles.

Advantages:

Disadvantages:

TEREX TLB935

Urgent work, which requires high-speed execution, will be performed by this assistant weighing 9 tons in the shortest possible time. The driver will even have time to watch his favorite sports broadcast or to do maintenance. With this device you can forget about the word "simple", its effectiveness has been proven by many professional operators, which allows you to use the electronic signal in every area.

The average price is 7,150,000 rubles.

Advantages:

Disadvantages:

JCB 4CX

Heater and air conditioner are two of these systems that can affect the quality of tasks. Nothing prevents the operator from focusing on the target and not being distracted by sweat or cold. By purchasing this product, the human factor will play a lesser role in the work. The machine itself weighs 8.6 tons, carrying capacity is 4.6 tons.

It is sold at a price of 7,200,000 rubles.

Advantages:

Disadvantages:

Rating of cheap (up to 6,000,000 rubles) backhoe loaders

MST M644 PLUS

A quality product featuring an advanced braking system. It provides a quick but smooth stopping of transport in a short period of time. Everything is in place in the driver's cab, so a person does not have to get used to a new product for a long time, which will reduce downtime. Weight - 9 tons, carrying capacity - 3.1 tons

The average price is 5,900,000 rubles.

Advantages:

Disadvantages:

Tarsus 880

Good diesel-fueled model. Suitable for most tasks. The working volume of the internal combustion engine is 4.4 liters. The assembly is done with high quality, no problems with the device will arise even after six months of active operation. The excavator weighs 7.1 - 8.5 tons, carrying capacity is 3 tons.

It is sold at a price of 4,050,000 rubles.

Advantages:

Disadvantages:

ELEX 81A

One of the best representatives of the budget segment. The backhoe loader of this company will become an indispensable companion when carrying out construction or repair and restoration work. Simple operation and high-quality assembly will allow you to enjoy your work, not get tired of it. Depending on the type of hand, the weight of the equipment is 7300/7700 kg, the carrying capacity is about 2 tons.

The average price is 3,742,000 rubles.

Advantages:

Disadvantages:

HZM WZ45-16

A popular product used by many construction companies.Most buyers are attracted by its cost, because by paying a little money, a person will forget about delays and frequent breakdowns. Transport is assembled at a global plant and according to European standards. The mass of the HZM WZ45-16 is 5.2 tons, the rated lifting capacity is 1.6 tons.

It is sold at a price of 3,580,000 rubles.

Advantages:

Disadvantages:

SDLG B877

The mass of the equipment is 8.7 tons, the carrying capacity is 1.8 tons. The indestructible engine and spacious cab will allow you to carry out work quickly and efficiently. The entrepreneur will forget about delays in business, and the employee will not come home tired. When these two points are met, then any business flourishes. With this machine it will happen many times faster. Modern technologies have made it possible to make the EDS productive and powerful, but the cost has remained at an affordable level.

It is sold at a price of 4,600,000 rubles.

Advantages:

Disadvantages:

Conclusion

Buying a backhoe loader is a responsible event that requires maximum concentration from a person. Because this is the only way to buy the best product at the best price. If you have experience using the models described in the rating, or more interesting representatives, tell us about it in the comments.