Best Pole Pruners for Tall Trees for 2020

Taking care of a summer cottage is difficult, especially for trees. They can get sick from bad weather or spring frosts. The first thing that always suffers is the crown, it ceases to be thick, yellow leaves are more common, and in some moments flowering stops altogether. Fruits are becoming less and less, and the tree loses its attractive appearance and stands out on the site.

Most novice gardeners do not understand what the mistake was and start looking for the root cause. However, the problem may lie in old and dried branches. If they are not cut off in time, any tree will deteriorate and begin to die. And to simplify this process, the editors of the site "bestx.htgetrid.com/en/" have prepared for you a rating of the best pole pruners for pruning trees for 2020.

Purpose of Poles

To help the tree bloom better and bear more fruit, experienced gardeners cut the old branches every year. It is best to hold this event in early spring or winter. But many owners of country houses are faced with a problem, because they do not understand how to prune. Some people prefer to do everything without the use of complex techniques. They take a ladder or ladder, climb a few meters and, using a hand, electric or gasoline saw, begin to cut off excess. This method is good, but it has a couple of disadvantages:

• First, the user is putting himself in danger. After all, you can cut yourself or fall;
• Secondly, such an operation takes a lot of time and physical effort.

Modern manufacturers have found an alternative to this method - a pole saw. Its effectiveness has been proven by experts, and its simplicity of design will allow you to master the device in a couple of minutes. Equipment for processing tall trees is suitable for beginners and professionals.

In principle, the tool is similar to a standard brush cutter, the only difference is the ability to remove thick branches that are at the top of the tree. In this case, a person does not need a ladder or a stepladder, and it is impossible to get hurt with such a product, if you do not do it on purpose. Therefore, safety increases significantly, and much less effort is spent.

Varieties of the device and their features

Dozens of species are sold in garden stores. Some are able to function without electricity, while others need fuel or a battery. However, the design of each equipment is the same and represents a handle, the length of which reaches several meters and a special block for cutting.

Mechanical Pole Pruner

This is the easiest and most affordable device for pruning tall trees. The mechanism is durable and reliable, maintenance is easy and does not take much time. In appearance, the equipment resembles standard scissors, which are located on a long handle.

Each action must be performed by a person, which is a minus, since he will spend a lot of time and make physical efforts to process. Therefore, the model is not suitable for cutting large branches.

Gasoline Pole Pruner

A more advanced option, which is similar to a trimmer, the only difference is the cutting edge. The main advantage of the equipment is the ability to work at any time of the year. In addition, this device can easily cut large branches without worrying about overheating of the device or a decrease in the charge level.

The design is equipped with a powerful motor, which is both positive and negative. Indeed, because of this, the dimensions of the model increase, which can cause some inconvenience when working, especially if the operations are performed not by a man, but by a woman. Hands will get tired quickly, and the noise will not allow pruning in the morning, since the person will wake up the neighbors or his family. However, this is not the only drawback, there is one more - the release of waste gases into the environment.

Maintenance of the product is simple, only it needs to be carried out after each operation. This process consists in lubricating the cutting elements and cleaning them from excess sawdust. Before work, it is necessary to prepare a mixture of gasoline and oil. Work must be carried out in personal protective equipment so that gases do not settle in a person's lungs and do not harm the body.

Electric Pole Pruner

Such devices are in demand, safe and durable. They have disadvantages, however, compared to the previous options, they are not so significant. There are two types of electric pole saws in total:

• A device that is powered from the mains;
• Battery products.

Both instruments have minimal differences between them. Basically, it's the price and the way it connects and works. So, if the user buys the first option, then he needs to think about buying a construction extension cord. Having completed this point, a person will be able to carry out pruning operations at a great distance without worrying about the technical condition of the device.

Cordless models are devoid of wires and complex connections. All that is needed is to charge the battery and get started. On average, one charge lasts for one hour. Of course, if a person has a large territory where there are many trees, this may not be enough. But, if you operate the device under normal conditions, then this time is enough completely.

Each model differs in the thickness and length of the blade, so it is important to carefully familiarize yourself with the design, technical features and connection method before purchasing. There is also a downside to electric models - low engine power. Compared to gasoline counterparts, the difference will be almost twofold. But even this is enough to carry out most of the pruning operations. Moreover, due to the low power, there will be no noise problem. The small weight makes it possible for both women and men to work without fatigue and excessive load on the hands, which is also a positive point.

What to look for?

Mechanical, gasoline or electric option, which one to choose from this, everyone decides on the basis of the money and effort that he is willing to spend. But in order to make it easier to make a choice, it is important to understand what criteria you should pay attention to:

• Rod length. Each tool has a different length to help you choose the one that will best help you prune the branches. In addition, convenience depends on this parameter. It is much easier to operate a small device than a multi-meter design. Do not buy too long models, as trees grow slowly.
• Engine. It all depends on what trees the user will work with. If they are small, then a standard model with low power is sufficient. When pruning large knots, you should think about gasoline options.
• Anti-vibration system. Unfortunately, not all products are equipped with this function. Thanks to her, a person gets less tired and is able to carry out many times more operations. Of course, the cost of the device increases because of this, but this has a positive effect on health.
• To achieve the best ergonomics, it is important to pay attention to the handle. It is desirable that it has a rubberized surface. This solution will allow you to cope with any work.
• The last parameter is the mass of the structure. Most users do not pay attention to this point, but experienced gardeners always pay attention to it. A large mass tells a person about a powerful engine, but it is better to have a tool with little power. Because it will allow you to do a lot more work and not get tired. In order to find a suitable model, it is recommended to pick up the appliance and stand for a while. If your hands start to get tired after a couple of minutes, it is better to look for another model.

Rating of the best mechanical pole saws

FISKARS UP84

A quality device made from aluminum and steel. The maximum length is 2.3 meters. This is enough for carrying out various operations at the summer cottage. Working blade diameter - 32 mm. Of course, this device will not be able to cut large branches, but all small parts are cut off without much effort.

The drive type is spring-loaded, which greatly facilitates the work. The shape of the blades is curved. The weight of the structure is 1.2 kg. To increase the service life, the working element is covered with a special protective layer. The handles have good anti-slip properties, which reduces fatigue several times. The rod type is telescopic, so it is easy to fold and store.

The average price is 6,700 rubles.

Advantages:

Disadvantages:

GARDENA 12000

An excellent and effective device that will allow you to carry out various operations at a summer cottage. Designed for pruning small and dried branches. The working diameter is 32 mm, which is the optimal solution. For greater convenience, there is a power drive.

The main element is made of steel, which has a positive effect on the durability of the product. The shape of the cutting part is curved, which makes it possible to carry out work easier and more efficiently. The maximum tool length is 1600 mm.

To increase durability and improve comfort, the manufacturer has equipped the tool with a protective coating and precision sharpening. There is also a blade lock and a comfortable rubberized handle. The bar is telescopic.

Sold at a price: 5,140 rubles.

Advantages:

Disadvantages:

RACO 4218-53 / 401C

A cheap but equally effective device that will help you care for small trees. The working diameter is only 30 mm, but this is enough to carry out most of the operations.

Like previous models, the main part is made of steel, but its quality is not so high, so the design requires special care in order not to damage the cutting elements. Drive type - spring. The weight of the device is 630 grams, while its length is 750 mm. The handles are made of aluminum, they are completely hollow inside, which can lead to deformation if handled carelessly.

The average price is 1,070 rubles.

Advantages:

Disadvantages:

Rating of the best electric pole saws

Greenworks GPS7220

A good model that will allow you to prune tall trees in a short period of time. Powered by a standard electrical network.The maximum clipping height is 4 meters, which is suitable for most users.

To make the work as comfortable as possible at every stage, the manufacturer has equipped the device with 3 sections that can be easily folded. This solution makes it possible to choose the optimal length for a specific situation.

The length of the cutting part is 20 cm, which increases the efficiency of the device significantly. Also, the device does not require constant tightening or lubrication, everything happens automatically. The anti-vibration system makes it possible to spend a minimum of effort. The noise during work is minimal, so a person does not have to worry about the health of his ear membranes. The warranty is 2 years.

The average price is 6 600 rubles.

Advantages:

Disadvantages:

RYOBI RPP755E 25 cm

An excellent model of a well-known company, which is powered from the mains and does not require constant maintenance. The power of the electric motor is 750 W, which is enough to carry out various operations. The blade length is 25 cm, which makes it possible to cut large branches in a short period of time.

The kit includes a special wrench and oil for lubricating moving parts. The weight of the structure is 3.8 kg. Therefore, the tool is suitable for both women and men. To ease the strain on the hands, there is a special belt.

It is sold at a price of 10,080 rubles.

Advantages:

Disadvantages:

HAMMER VR700C

A budget solution that will help eliminate all high-altitude diseased parts of the tree. Product power - 710 W. Powered by a home network. The bus length is the same as the previous version. Knife type - double-sided. For greater convenience, the boom can be adjusted in height, which has a positive effect on work. Product weight - 5.9 kg. The device has a 5-year warranty.

Sold at a price of 6,000 rubles.

Advantages:

Disadvantages:

Rating of the best battery devices

PATRIOT СР420 Li 40V

A quality product that runs on a rechargeable battery. A single charge lasts about 60 minutes. This time is enough to cut all dry branches. The handle is comfortable, while the weight is 3.1 kg, which allows you not to get tired during the cutting process. Low noise from the motor. Powerful enough to cut medium knots.

Sold at a price of 5,500 rubles.

Advantages:

Disadvantages:

Bosch UniversalChainPole

An expensive device that can last a long time. The handle is telescopic, which makes it possible to cut branches located at a height. The chain is lubricated automatically. A special microcircuit regulates the consumption of electrical energy. This increases the battery life. For greater convenience, there is an adjustment of the cutting angle.

The average price is 16,000 rubles.

Advantages:

Disadvantages:

Pole cutter "Gardena"

A high-quality rechargeable device that will help get rid of diseased branches and green trees. The design is prefabricated, in addition to the standard saw, there is a delimber in the kit, which effectively copes with difficult branches. The chain speed is 3.8 m / s. The maximum processing height is 3-4 meters.

Sold at a price of 20,000 rubles.

Advantages:

Disadvantages:

Finally

Taking care of the site is a difficult task that takes a lot of time. Special gardening tools can be of great help, one of which is a pole saw. If you have experience using the models described in the rating, or more interesting options, tell us about it in the comments.