The Best Parquet Floor Polishes for 2020

By duty, a wooden floor is the most loaded part of any living space. Frequent rearrangement of furniture, holding holidays or meetings in a friendly company - this is not a complete list of the loads that flooring has to experience. And, of course, all these tests do not pass without leaving a trace. The noble parquet will gradually darken, become covered with a network of cracks and scratches, and ultimately simply lose its original gloss and shine. However, do not be upset and immediately become discouraged about this, because this problem is completely solvable, the main thing is to take care of its elimination in time.

The editors of the site "bestx.htgetrid.com/en/" offer you a rating of the best floor polishing products for 2020.

Frequency of renovation of parquet flooring

The frequency of organizing the execution of polishing work depends on some points, among which the following can be distinguished:

• degree of load on the coating. The level of wear can be determined based on the mechanical stress on the floor. If, for example, you often have to receive guests or rearrange furniture, you will have to perform this procedure much more often.
• type of coverage. Oil-wax-based mixtures penetrate much deeper into the wood pores, providing protective properties to the board, but not to its surface. Here there is an accumulation of various contaminants, thereby creating the need for polishing. On the contrary, varnish helps to create a film that allows the floor surface to be protected for a longer time. On the other hand, gloss is inherent in the varnish, and it tends to peel off under constant loads.
• room dimensions. The dimensions of the housing have a direct impact on both the choice of polishing agent and the more optimal option for using it.
• finance. The cost of polishing a parquet board on our own directly depends on the cost of materials, and when registering a service, it is calculated directly by an organization specializing in this field.

In most cases, users do not make absolutely any calculations based directly on the general and external condition of the parquet flooring.

Varieties of polishing

There are 2 main groups of wood flooring processing:

1. By application. There is a manual polishing of the parquet, which implies the implementation of the procedure directly with a rag or improvised devices using suitable means. There is also a machine method, which involves the use of polishers - specialized equipment equipped with 1-3 discs. This method is applicable mainly for premises with large areas, since the cost of such a device or its rental in this case will be much higher.
2. By surface type:

• glossy;
• semi-gloss;
• matte.

The decision to choose depends on what kind of coverage the floor has. But the most common type of coating is still considered to be polishes, which make it possible to obtain a semi-gloss surface.

What is the polishing process

The first step is to carefully learn one simple rule - the polish should lie on a perfectly clean surface. To do this, the parquet is thoroughly washed with a special product, after which it is completely washed off with plenty of clean water and dried well.

Distribution of funds is carried out by any available device (mop, brush, napkin). The initial layer of polish should be applied along the grain of the wood and left to dry completely, which lasts an average of 30 minutes to 2 hours. After that, the parquet is rubbed with a floor polisher or soft cloth. This is followed by the imposition of a new polishing layer perpendicular to the first. Thus, the floor is processed over the entire area. If it is light and uneven, the procedure should be repeated until the desired result is obtained.

Polished parquet does not require any special treatment. It is enough only during wet cleaning to wipe dust and dirt from it, not forgetting to carefully wring out the rag in order to prevent excess moisture from entering.

Parquet polishing - correct and timely floor care

Polishing agents (also called polish) can be found in liquid or spray form. They do not harm the lacquered coating and lie flat, without streaks. The basis of this kind of funds is wax and a set of polymers that form a protective film that protects the wood from various kinds of damage, excess moisture and exposure to negative ultraviolet rays.

There are 2 main types of polishes:

• soluble. Used to treat varnished floors. The parquet will acquire a perfect gloss, and if the correct dosage is observed, the possibility of slipping on it is excluded. The cost of water-based polishes is much lower, but the result from their use does not last long enough;
• wax. Suitable for oiled floors. They are made in the form of a spray or mastic of medium consistency. During the distribution of such funds, it is necessary to be very careful to ensure that no sagging is formed on the surface. The main disadvantage is a somewhat high cost, but, on the other hand, this type of polish guarantees the desired effect and its preservation for a rather long period.

In order to carry out the procedure for giving the floor a beautiful external state and ensuring reliable protection of its surface from various kinds of damage, it is necessary to use a specially designed tool. To date, there is a huge range of compounds of this type on sale, most of which are water-based.

Such polishes are completely safe for human health and dry quite quickly. The ease of application and quick drying of the composition can significantly save time when caring for the parquet.

Today in specialized stores you can find matte, semi-gloss and glossy polish. It is the semi-glossy variety that has gained the greatest popularity and prevalence. It contains wax and polymer components that contribute to the formation of a protective and shiny film on the surface.

When choosing a polish for parquet, it is also necessary to take into account its quality - coated with ultraviolet varnish in production, it does not allow most of them to lie flat on the surface. That is why, before using the protective agent, it is recommended to apply it to the darkened part of the floor to weather the adhesive properties.

Classification of wax polishes

If oil is used as the final floor covering, it is recommended to polish the surface with wax as the main component. It is also an excellent base for using polish.

Wax polishes are classified into three main categories:

By consistency:

• liquid wax.A fairly practical option, which is a completely ready-to-use composition. It does not create difficulties in the application process and can be used even in hard-to-reach areas.
• hard wax. This protective agent must be diluted with water in advance. However, this does not mean that choosing a hard type of wax can lead to a lot of inconveniences. Rather, on the contrary, it will be possible to independently control the quality of the consistency so that its shade fully matches the tone of the parquet.
• pasty wax. It is considered a compromise solution between solid and liquid varieties. Can be applied with a spatula, brush, or a light cloth.

By composition:

• oil-wax. It is a thick composition that perfectly penetrates into the pores of wood and contributes to obtaining a smooth and glossy floor surface. Used every six months.
• polish. It contains only wax, water and a set of polymers. Used monthly.

By color:

• colorless. A unique composition that does not have any effect on the color change of the parquet board.
• dark. Designed exclusively for dark colored parquet;
• bleaching. Designed for light wood species.

Rating of the best polishes for parquet from European manufacturers

Polishing agents for parquet boards from European manufacturers have found very positive recommendations:

№	Trademark	Production	The cost
1	BRILL Adesiv	Italy	958 rub / l
2	HG polish	Netherlands	1200 rub / l
3	Dr. Schutz Polish (Dr. Schutz)	Germany	1316 rub / 0.75 ml
4	MELLERUD	Germany	399 rub / l
5	EMSAL Glitter	Germany	416 rub / l

BRILL Adesiv

A product intended for the restoration of varnished wooden floors. Specially formulated for home use, instant action, applied with a damp soft cloth.

The basis of this product is an aqueous dispersion, and polyurethane acts as an active component. Simple enough to use. A small amount of the product must be applied to the floor surface and rubbed with a damp cloth until an even layer is formed, making sure that there are no smudges. During the polishing process, the water dispersion evaporates, and only a polyurethane film remains on the surface, filling the scratches and creating an additional protective layer for the lacquer coating. Ultimately, the renovated floor gets a uniform shine and fresh appearance.

Advantages:

Disadvantages:

HG polish

A product for polishing varnished parquet. Perfectly helps to eliminate minor scratches that eventually appear on the surface of the parquet floor, giving it a dull appearance. Thanks to the use of this polish, the floor surface gets a shiny, shiny state and looks like new. In addition, it contributes to the formation of a protective film that prevents further damage to the surface.

Simple enough to use. A few drops of polish are applied to a soft, lint-free cloth wrapped around the mop. After that, a small amount of the product is applied directly to the surface and evenly distributed in one direction. After three days, the coating becomes water-repellent. If reuse is required, a new layer of polish can be applied over the old one.

Advantages:

Disadvantages:

Dr. Schutz Polish

A polish specially designed for the maintenance of all lacquered wood surfaces. It gives the surface a fresh look, protects the floor by forming a film, helps prevent slipping and is also water-repellent. In addition, this tool can be used to care not only for varnished coatings, but also for the care of laminate, linoleum and ceramic tiles. Drying time is half an hour, if necessary, you can reapply the layer. If you want to give the floor a special glossy look, the surface must be polished with a disc machine with a white pad.

Advantages:

Disadvantages:

MELLERUD

Thanks to the special formula of the active ingredient, it contributes to the simultaneous cleaning and gentle care of surfaces of all types of parquet and wooden floors. Perfectly removes various types of dirt, cleans and polishes surfaces on its own. In addition, it prevents streaks, discoloration, streaks and stress marks from walking and moving furniture.

After treatment with this tool, the shine appears on its own. If the desired result is lost, the polish can be reapplied. Surfaces that are dull, matt or particularly worn must be treated twice.

Advantages:

Disadvantages:

EMSAL Glitter

A care product that contains orange wax. Provides perfect cleanliness and a streak-free shiny look. Provides the surface with a long-lasting shiny condition, and also contributes to optimal protection against shoe marks, damage of all kinds and re-contamination. Suitable for polishing water-resistant coatings.

Advantages:

Disadvantages:

Conclusion

Maintenance of parquet flooring must be carried out regularly and correctly. It is in this case that he will maintain his excellent condition and will delight his owners for a long time. However, it will not be enough to keep an eye on cleanliness, so it is necessary to carry out the procedures for polishing the parquet in a timely manner.

If you have experience in using parquet polishes described in this rating, or a more interesting option, tell us about it in the comments.