🏍️ Best motorcycle, scooter and ATV helmets for 2020

Rides on a motorcycle, scooter and other extreme transport are accompanied not only by positive emotions and adrenaline rush. Such a pastime can cause serious injury due to the high risk of injury. That is why every experienced biker knows that in no case should you get behind the wheel without a special helmet. This equipment is presented on the market in large quantities, and so that you do not get confused in a huge assortment, the editorial staff of the site "bestx.htgetrid.com/en/" has prepared a rating of the best helmets for 2020.

We choose depending on the size

The most important criterion that will help you decide on the required product is the circumference of your head. To do this, arm yourself with a measuring tape, stand up straight, the measurement should be taken in the area just above the eyebrows. Correlate the obtained results with the dimensional grid of the helmet manufacturer. Each digit corresponds to a specific size, for example, S - 55-56, M - 57-58. However, keep in mind that these parameters may vary from manufacturer to manufacturer. Therefore, be sure to try on your equipment carefully before purchasing.

Advice! The correct fitting of the helmet is as follows: take the accessory in your hands, hold on to both straps, slightly stretching them in different directions. Then put the helmet on your head, while maintaining an upright position, you should not bend forward.

How to determine if the equipment is sitting correctly

• The ears are in the correct position - if you feel discomfort, in particular, your ears are uncomfortable, try lifting the helmet and twisting it in different directions. Better yet, use a comforter. Firstly, it will give additional comfort, and secondly, it will provide additional hygiene to your head.
• The equipment should sit firmly on your head, without wobbling. To check this point, simply twist the neck, tilt back and forth - the helmet should not rotate and should not sit too loosely.
• Ease of use - despite the fact that the accessory must hold tight, wearing it is always accompanied by comfort. No pressure should be felt, blood flow is not disturbed and no pain is present either. To figure it out, walk around with a helmet on your head for about 15 minutes, during this period it will be possible to accurately determine the conformity of the product to your head. But if there is pain from the straps on the cheeks, then there is no need to be afraid of this, since the straps are able to take on the anatomical shape of the user's skull over time.

Types of goods

The following types are currently common:

1. Integral is the most popular type, it belongs to the safest types of goods, since it completely covers the driver's head. Also, such a helmet guarantees almost complete soundproofing, which will bring greater comfort when traveling during bad weather. Most often, the manufacturer equips the equipment with durable and thick glass, which is designed to protect the biker from bad weather and bright sunlight. The disadvantages of this product are the impressive weight and lack of air flow inside the helmet.
2. Fullface - such equipment does not completely cover the biker's head, but still provides him with reliable protection. At the same time, a wide field of vision is maintained, the viewing angle allows you to closely monitor the road. For additional safety, the equipment is equipped with a special visor and chin restraint.
3. Open helmet - as the name implies, such equipment is not intended to completely hide the head and face of the biker. But such a model does not interfere with the review at all, it has a low weight, for which it is so appreciated by most drivers. This equipment is more suitable for everyday trips that are not associated with high speeds and the risk of falls, but open helmets should not be used on the race track.
4. Modular - such a product is a two-in-one version, namely a combination of an integral helmet and an open version. Such a model is convenient because it has a small mass, it leaves the opportunity to talk on the phone, eat and drink without taking off your equipment. Along with the comfort, a high level of safety is maintained.

Other selection criteria

After you have decided on the required type and size of the helmet, do not relax. Equipment, among other things, has a number of other functions and features that can affect the operation of the product. Will consider these features in more detail.

Manufacturing material

The strongest and most durable material is fiberglass. It provides a solid body, shock and drop resistance, and the user can customize the helmet to their liking by adding a variety of decals and designs. If you cannot afford such material, then pay attention to the models made of thermoplastic. Such material has a lower cost, but it is less strong and resistant to damage.

In addition, the helmet must be equipped and protected inside, for this a special lining is used to reduce the intensity of the impact.

Product shape and weight

The best option is the rounded, streamlined shape of the helmet, which in the event of an accident will not allow the formation of additional injuries due to uniform sliding.

The less weight the equipment has, the less impact on the spine, which also has a positive effect on safety.

Advice! Never buy a used helmet. Also, do not use equipment involved in the accident. An impact and a fall can damage the inner protective part of the equipment, and cracks in the shell will make the use of the helmet completely useless.

Glass

The most important piece of equipment. It is designed to protect the face of the biker, while it must meet the requirements that allow the use of equipment during racing and extreme riding. The most commonly used product is BSI mark.

We also recommend purchasing models for which you can replace the protective glass. Active use and fast driving lead to the fact that the glass is scratched, its transparency decreases, and accordingly, the likelihood of an accident increases. Buying a new helmet will hit your pocket, and replacing the glass of old equipment will significantly save you money.

Ventilation

An additional equipment option that slightly increases its cost. But if you are going to actively ride a scooter or bike, you should not save. Firstly, ventilation can make frequent travel more comfortable by cooling the air. Secondly, the use of the helmet will become more hygienic, as the ventilated liner absorbs sweat and dirt less, so you will need to wash your gear less often.

Most often, ventilation is presented in the form of channels that the biker opens and regulates solely to his taste and desire.

Rating of the best helmets for motorcycles, scooters and ATVs

AGV Pista Gp R Agv Glossy Carbon

This helmet is completely professional equipment, since a multiple winner of motorcycle races took part in its development. The testing also passed all the necessary procedures with the active assistance of the participants of the competitive races.

The equipment is completely enclosed, however the biker will appreciate the full field of view and good visibility. At the same time, the protection of the biker's skull bones is preserved even in the most extreme situations. The equipment is tightly and securely attached to the head, maintaining complete freedom of movement and without pinching the blood flow. The manufacturer scrupulously approached the problem of safety, for this a special technology was developed, which has no analogues yet. The essence of this technology boils down to a competent distribution of the impact force when falling.

Advantages:

Disadvantages:

The average cost is 75,000 Russian rubles.

ARAI QV-PRO GoldWing

Such equipment will become an indispensable assistant for a biker who prefers to ride on city roads. The prototype of the model is the well-known sports version of the helmet, thanks to this similarity, the product is very popular with racing fans.

The leading design feature is the ventilation system. It includes elaborate ducts and air intakes. To adjust the level of air circulation, the biker does not have to exert much effort and remove protective gloves. A big plus will be the glass, which does not allow the user to be dazzled by bright sunlight, and a wide field of view is also preserved.

Advantages:

Disadvantages:

The average cost is 37,000 Russian rubles.

SHOEI GT-Air WANDERER2

If you are looking for the most comfortable model, this product will definitely interest you. The inner lining ensures comfort of use, the protection from bright sunlight will protect the retina of the eyes. In addition, there is excellent ventilation, which will be appreciated by bikers who spend a lot of time on the road.

The equipment is multifunctional, you can use it on a daily basis, or you can safely wear it for extreme races. The product is certified, it fully complies with all international requirements. Particular attention should be paid to the case, made according to a special system. This technology includes a combination of carbon fibers. Thanks to this, you get a robust and shock-resistant design. Also, the equipment is easy to remove if necessary.

Advantages:

Disadvantages:

The average cost is 31,000 Russian rubles.

Shoei Neotec II

This product is ideal for tourist trips on a scooter without dangerous and sharp turns. The helmet is of the modular type.

This product is a revised version of the previous version, users have already appreciated all the changes. So what has changed in the product Firstly, the sound insulation due to the aerodynamic design of the helmet. Now the biker will feel as comfortable as possible at high speeds. Secondly, the adjustment of the safety straps has also changed for the better. And you can also forget about the strong pressure on your ears during overloads, the manufacturer has worried about this problem. A special headset is built into the helmet to prevent pressure. The body of the product is durable, it is able to compete in reliability with more expensive and equipped models. The glass can be lowered if necessary, there is a tint to protect from the bright sun.

Advantages:

Disadvantages:

The average cost is 40,000 Russian rubles.

Shark Evo-One 2

A combo product capable of going from a fully enclosed helmet to an open and lightweight version.This feature is available because the front of the product slides back instead of up. This design, of course, is a plus, but it still has some inconveniences, so the closed version is more popular.

Manufacturing material - thermoplastic. That is why the model weighs a little and does not hit the wallet hard. However, the strength of the body is significantly lower, making the helmet unsuitable for dangerous races with risky stunts. The glass is manufactured to protect the eyes from glare and the full viewing angle is maintained.

Advantages:

Disadvantages:

The average cost is 25,000 Russian rubles.

HJC IS-MAX II

The stylish helmet is made of durable materials, but its weight is a significant disadvantage - long trips can cause discomfort to your neck. Ventilation is also somewhat specific: for some it may not be enough, and for some bikers it is quite comfortable during long runs. The sun protection has been worked out qualitatively, the glass is easily moved and does not interfere with the viewing angle.

Advantages:

Disadvantages:

The average cost is 11,000 Russian rubles.

FoxRacing V3 Preest LE

If you are looking for a product designed for racing, this model should be right for you. The construction is solid, the assembly is of high quality, the brand-manufacturer has enough fans, among them there are professional bikers and racers.

The housing is made of shock and drop resistant materials with minimal cracking. The interior of the product is also designed with the potential for hazardous injury in mind. Ventilation is provided, it is convenient in operation and allows efficient circulation of air masses. The field of view is wide enough, and the low weight of the product will save the user's back, neck and spine.

Advantages:

Disadvantages:

The average cost is 25,000 Russian rubles.

FOX V3 KILA HELMET

Famous among bikers, the helmet looks stylish and has excellent technical characteristics. Despite the fact that the model is relatively new, it remains in demand to this day.

The strength of the equipment is high, a special technology will save the user's neck from breaking even in the event of the most severe and unfortunate falls. Additional protection is located between the main body and the inner lining - this approach will soften the fall. Also, the visor with glass is able to separate itself in an emergency, which also minimizes the possibility of injury. The helmet is firmly attached to the head, without restricting movement.

Advantages:

Disadvantages:

The average cost is 25,000 Russian rubles.

If you had experience using the products described in the rating, write your feedback in the comments.