Every vehicle owner at least once in his life has applied for specialized tire fitting services. After all, motorists often face problems associated with replacing rubber, gluing cameras. In addition, some auto owners visit tire changers to inflate the wheels of their vehicles.
Of course, you can perform such robots yourself, at home. However, without specialized equipment, such work will take a lot of time and will take a lot of effort. Specialists working in tire fitting, thanks to the availability of special equipment, will perform work on replacing rubber, gluing cameras and so on with high quality and in a short period of time. The editors of the site "bestx.htgetrid.com/en/" have prepared for your attention a rating of the most reliable, high-quality tire changers for 2020.
Content
Description
What machines are there, how much do they cost? Even for a simple, small tire fitting, special equipment is needed, which allows high-quality, and most importantly, to quickly carry out work on replacing rubber, as well as mounting wheels. Thanks to the use of such a professional-type tool, the speed of such work increases on average 3 times. In addition, special machines make it possible to ensure the performance of assembly work at a high level.
A tire changer is a special mechanism that allows safe, and most importantly, correct, accurate wheel bead. In total, there are several types of such devices:
- Semi-automatic. Such devices, in comparison with automatic analogs, have a low level of productivity. In addition, when performing wheel boring on such equipment, a mechanic is directly involved in the entire cycle of work. However, these machines are small-sized devices, so they are ideal for workshops with limited space.
- Automatic. They have high productivity, as well as the speed of work. During the operation of such a device, the mechanic's control over the work is reduced to a minimum value. Also, such devices are equipped with a large set of basic and additional functions and options. Therefore, when using automatic machines, the range of work performed increases significantly. However, for the full operation of such a device and its installation, there must be a lot of free space in the workshop. As a rule, such equipment is rarely found in small tire shops due to its high cost, as well as considerable dimensions.
Fundamentally automatic models of tire changers differ from semi-automatic analogs only in that in semi-automatic machines, the mechanic himself brings and moves the gripping paw. In automatic models, adjustment and control is carried out only thanks to special pedals.
On a note! Tire equipment comes in different configurations. The possibility of using additional options, as well as functionality, depends on the presence of special mechanisms directly in the design of such equipment. In addition, such devices are divided among themselves with respect to working with wheels of cars of a passenger or truck type.
Selection recommendations
How to choose what to look for and what mistakes to avoid when choosing a machine? A large number of tire fitting equipment, both foreign and Russian, is presented on the domestic market. However, before buying a tire changer, it is necessary to consider several important parameters on which the functionality and performance of the purchased device will depend. Before you buy a tire changer, you need to decide on such selection criteria and nuances as:
- Nutrition. For the full functioning of such equipment, electricity is required. When choosing a tire changer, it is necessary to take into account the type of electrical network in the building (workshop, service station or garage) in which it will be installed. For an ordinary garage, which is powered by 220V, it is best to buy models that operate using a single-phase network. However, in this case, the performance level of such models will be small. For specialized car services or workshops, it is preferable to buy professional-type equipment that is powered by a three-phase power supply.
- Equipment type (automatic or semi-automatic).
- Disks diameter indicator. Before purchasing equipment, it is necessary, first of all, to decide on what size wheels will preferably be serviced within the workshop. It should be noted that on passenger cars discs are used, the landing diameter of which is 12-24 inches. Trucks use discs up to 56 inches.
- Availability of additional functionality. Allows you to quickly and efficiently perform a wide range of work. For example, the presence of a third hand makes it possible to work with low-profile tires. In addition, such a device significantly reduces the workload on the machine operator when performing tire fitting work. Thanks to the third hand, it is possible to carry out pressing, squeezing, and installation of low-profile rubber.
Some users purchase universal type tire changers. Such equipment is equipped with special mechanisms, as well as devices that allow you to quickly service both passenger cars and trucks. In addition, many consumers recommend purchasing machines equipped with a special system, the so-called explosive pumping. Such a system, due to its high pressure, is capable of filling tires with air in a short period of time. In addition, it allows the use of tubeless tires.
Review of the best manufacturers of tire fitting equipment
Which company is the best machine tool, which one is better to buy? The domestic market is represented by tire changers from different manufacturers. According to most buyers, one of the highest quality equipment is made in Germany. The most popular German company that produces such devices is Hofmann. The equipment of this company has a high level of functionality, as well as the quality used during the assembly of machines and parts. However, the cost of the products of this company can go up to 500 thousand rubles per unit.
Italian-made equipment is distinguished by attractive design and high level of functionality. The most popular Italian tire changer manufacturers are Giuliano and Corghi.
Some of the most affordable foreign-made equipment are machines made in the Czech Republic.In terms of their quality and functionality, such devices practically do not differ from well-known German and Italian counterparts. In addition, some consumers claim that Czech machines are the golden mean in the market for domestic tire changers.
Czech-made products combine such parameters as price / quality / functionality. The most popular Czech manufacturer is KronVuz, whose products have a well thought-out design, quality and reliability.
The cheapest are Chinese machines, as well as Russian-made products. As a rule, devices made in Russia belong to the budget class. Such models have a small set of functions and are perfect for small garages or service stations. However, their cost varies in the region of 30-70 thousand rubles.
Best tire changers for 2020
The best, popular models of tire changers have such parameters as ease of operation, good reliability, and functionality. Most professional grade models are equipped with both basic and additional functions. In addition, domestic consumers, when buying such devices, pay attention to the ratio of price - quality parameters.
In the domestic market, in addition to expensive, professional machines, there are also budget models that are able to perfectly cope with the work assigned to them. At the same time, there are often budget-class models from popular world manufacturers of tire fitting equipment, which supply to the territory of Russia only certified products with a long warranty period (from 12 months or more).
Where can you buy? Today, you can purchase tire changers with appropriate quality certificates not only in specialized stores, but also in online stores by placing an online order.
The best automatic tire changer models
The machines belonging to the automatic class are best suited for professional tasks related to tire fitting. The distinguishing feature of such devices should be attributed to the fact that they can be operated by the clamping head in automatic mode, without the use of physical influences from the mechanic - operator. Such machines are much more expensive than semi-automatic counterparts, but they pay off in a relatively short period of time and allow a decent saving of time and human resources.
NORDBERG 46TRKE56 for trucks up to 56₺
A reliable China-made truck device made of quality materials. It is used for mounting and dismounting tires on trucks and buses, the rim diameter of which varies between 14-56₺. As a rule, such equipment is often used directly in car services or in specialized workshops. In addition, it is often purchased for vehicle service stations.
Equipped with a hydraulic drive, with the ability to adjust the pressure. This device is equipped with a movable type instrument console. High strength forged, hardened steel was used in the manufacture of all parts of this apparatus. This machine is designed for use in high-stress environments. For fixing, special clamping jaws (4 pieces) are responsible for this unit. Automatic control is carried out through the use of a special portable control panel.
The weight of this NORDBERG 46TRKE56 is 1000 kg.The warranty period is 12 months. The dimensions of the device are 2080x2310x1100 mm. Can be operated from wheels, the maximum size of which is 98₺ (2500 mm). The maximum width is 47 inches (1200 mm). A voltage of 380 V is used for power supply. The disc diameter is 14-56 inches.
Advantages:
- High performance;
- Warranty period;
- High assembly reliability;
- Accuracy;
- The ability to adjust the disc fixation;
- Durability;
- Secure fixation is ensured by 4 clamping jaws;
- Complete with a portable control panel;
- The presence of a two-speed electric motor;
- The ability to independently change the position of the desktop.
Disadvantages:
- High cost (average price RUB 618,207.84);
- Dimensions.
SIVIK KC - 402A PRO AUTOMATIC, 380V
This model is designed for mounting and dismounting of tubeless and tubeless tires of passenger cars, with a maximum rim diameter of 24 inches and a minimum of 10 inches. The disc width should not exceed the 330 mm mark. This machine is powered by a 380 V mains supply.
Equipped with two speeds of rotation, which allows quick mounting and dismounting of tires. It should be noted that the SIVIK KC - 402A can be additionally equipped with a special booster, thanks to which it is possible to perform the so-called explosive pumping of wheels. This device can be additionally equipped with a device called "third hand". Thanks to this device, it is much easier to work with low-profile rubber or tires with a so-called hard cord.
The warranty period for this device is 2 years. The outer diameter of the gripper is 10-22₺. The inner diameter of the gripper is 12-24₺. The air pressure indicator directly in the pneumatic system itself is 10 bar. Unit weight is 253 kg. Dimensions - 1120x1580x1890 mm.
Advantages:
- Functional;
- Warranty period;
- The presence of 2 speeds (power supply at 1 speed is 220 V, at the second - 380 V);
- Explosive pumping system;
- The ability to use a third hand;
- The presence of a solid work table;
- Equipment;
- Safety (complete with built-in pressure sensor).
Disadvantages:
- Price (139,000 rubles);
- Weight;
- Some users point to increased oil consumption.
KronVuz KV-505
An inexpensive automatic device that is perfect for small workshops or garages with a 220 V power supply. Equipped with a pneumatic rear console with a slight tilt. High-quality, durable steel was used in the manufacture of parts for the working mechanism of this apparatus.
The mounting head can be additionally equipped with a special plastic attachment. By using such a nozzle, the possibility of damage to the surface of the rim or tire is minimized. The disc is fixed and positioned using a 2 - cylinder clamp. Many users note that the control pedals are ergonomically located on the KronVuz KV-505.
The external fixation disc diameter is 10-21 inches. The disc diameter index for internal fixation is 12-24₺. Suitable for cars with a maximum wheel diameter of 41₺. The device weighs 208 kg. Dimensions - 2000x1040x780 mm.
Advantages:
- Acceptable cost (89,000 rubles);
- Installation quality;
- Connects to a single-phase network;
- Good ergonomics.
Disadvantages:
- Equipment;
- The third hand is missing;
- There is no explosive injection system.
Review of the best semi-automatic models
In semi-automatic models, the operator himself controls the work of the working head. It should be noted that such devices, in comparison with analogs of the automatic type, have a slightly lower level of efficiency. However, the advantages of such units include their affordable cost, as well as ease of use.
Giuliano S-110 No. 21Q0100266
A reliable, productive device made in Italy, which is suitable for equipping garages specializing in servicing cars of different brands. It is used for mounting, dismounting of tube and tubeless tires of standard type of passenger cars.
Equipped with electromechanical type drives, as well as a special pneumatic reducer that limits the working pressure. The discs are secured with a pneumatic cam clamp. High quality, durable steel was used in the manufacture of the mounting foot. The pneumatic cylinder is galvanized. Specially designed blade design eliminates the possibility of damage to disks and tires.
The weight of the Giuliano S-110 is 165 kg. Dimensions - 1690x790x990 mm. The indicator of the diameter of the internal fixation of the disc is 12-20₺, of the external fixation - 10-18₺. For the operation of the device, an electrical network with a power supply of 380 V is required.
Advantages:
- Component quality;
- Ease of operation;
- The cost is 78,120 rubles;
- Foot quality;
- Suitable for standard tubeless as well as tube tires.
Disadvantages:
- A 220V network is not suitable for work;
- Dimensions.
SIVIK KC-302A, SEMI-AUTOMATIC, 220V
A powerful device that is perfect for working with wheels, both ordinary passenger vehicles and light, small trucks with a rim diameter of 24 inches. The maximum permissible wheel diameter for working with this device is no more than 1000 mm. The maximum width is 330 mm.
The KC-302A work table is equipped with a reinforced structure. Also SIVIK KC-302A is equipped with a special mounting console. Thanks to the special design of the mounting head, this unit is suitable for all types of tires, with and without tubes. In addition, this unit can be additionally equipped with a third hand and special adapters that allow servicing motorcycle wheels.
Equipped with one table rotation speed. The outer gripper has a diameter of 10-22 inches, the inner diameter is 12-24 inches. Suitable for wheels with a maximum diameter of 1000 mm and a width of not more than 330 mm. The weight of this model is 220 kg. Dimensions - 1110x930x1720 mm. The manufacturer's warranty is 2 years.
Advantages:
- Ease of operation;
- The ability to install a third hand;
- The presence of a powerful squeezing cylinder;
- Possibility to install special adapters for servicing motorcycle wheels;
- Warranty period;
- Build quality.
Disadvantages:
- Cost for a model of this class (89800 rubles);
- The presence of only one rotation speed of the table.
ATIS TC20 380B
Reliable, relatively inexpensive model of an Italian-made semi-automatic tire changer. High quality steel, rubber and durable plastic were used in the manufacture of this unit. For service on this machine, discs of different alloys are suitable, the diameter of which does not exceed 20 inches. The rotary table is equipped with four self-centering cam mechanisms. Reinforced class squeezing device is equipped with special protective pads and is suitable for different types of tires.
This device is suitable for servicing wheels with a maximum diameter of 36₺. The outer grip diameter is 11-18₺, the inner grip diameter is 13-20 inches. Operates from a 380V network. It is completed with a mounting blade, an air preparation unit, a special pumping gun with a pressure gauge. The weight of the device is 250 kg. Dimensions - 980x880x960 mm.
Advantages:
- Cost (65,955 rubles);
- Equipment;
- Ease of management and operation;
- Component quality;
- Dimensions;
- Suitable for discs of different alloys.
Disadvantages:
- Low power;
- Not suitable for workshops with a voltage of 220V.
Rating of the highest quality tire changers
The stands refer to the basic equipment in garages and workshops. Thanks to such units, it is possible to carry out repair work with wheels in a short period of time.Such devices allow you to easily separate and install the tire on the disk.
The stands can operate both in automatic and semi-automatic modes (depending on the model). As a rule, most workshops purchase stands for servicing trucks with rims larger than 50 inches in diameter. However, such devices are often used to work with light vehicles.
SOROKIN 15.1 semiautomatic device 22₺
A reliable semi-automatic machine of domestic production, which is suitable for mounting or dismounting wheels on cars and small trucks. This unit is capable of servicing wheels with a diameter of 10-22 inches and a width of 3-13 inches.
Sorokin 15.1 weighs 190 kg. The index of the inner disk clamp is 12-22₺, the external one is 10-20₺. In this case, the maximum disc diameter should not exceed the mark of 1000 mm. The wheel width is 330 mm. A voltage of 220-230V is used for power supply. The power of Sorokin 15.1 is 0.75 kW. Dimensions - 980x760x840 mm.
Advantages:
- Suitable for both passenger cars and small trucks;
- Ease of operation;
- Small size;
- Build quality;
- Affordable cost (59,999 rubles).
Disadvantages:
- Power.
AE&T M-100 for wheels 10-22₺
It is a semi-automatic tire changer, which is designed to service wheels with disks with a diameter of 10-22 inches. Refers to standard machines, the so-called entry level. Perfect for service stations and small workshops with a minimum amount of work.
The device weighs 170 kg. Refers to an economical, inexpensive class of specialized equipment. The outer disc clamp is 10-19 inches. The inner clamp is 12-22 inches. Suitable for wheels with a maximum diameter of 1040 mm and a maximum width of 355 mm. The dimensions of the device are 960x760x880 mm.
Advantages:
- Affordable price (63188 rubles);
- Dimensions;
- Ease of operation;
- Made from quality materials.
Disadvantages:
- Functional;
- Not suitable for large jobs.
NORDBERG 4641 automatic, 220V
It is a reliable, high-quality stand, which is equipped with a folding, pneumatic stand. Suitable for servicing cars, motorcycles, small trucks. The maximum grip is 26 inches. Suitable for servicing both large and wide tires. Can be used to service low profile tires. It is equipped with a powerful engine and a vertically arranged device, which automatically takes the position necessary for tire maintenance.
This device is powered by a 220V power supply. Suitable for wheels with a maximum diameter of 43₺. The internal clamp is 12-23 inches and the external clamp is 14-26₺. Dimensions - 770x990x1000 mm. Unit weight is 235 kg.
Advantages:
- Functional;
- Component quality;
- Ease of operation;
- Specifications;
- Equipment.
Disadvantages:
- High cost (118,439 rubles);
- Power.
Comparative table of tire changers:
| Name, description | A type | Rim diameter of wheels (in inches) | Dimensions (mm) | Cost (in rubles) | |
|---|---|---|---|---|---|
| NORDBERG 46TRKE56 for trucks up to 56 inches | Auto | 14-56 | 2080х2310х1100 | 618207.84 | |
| SIVIK KC - 402A PRO AUTOMATIC, 380V | Auto | 24 | 1120x1580x1890 | 139000 | |
| KronVuz KV-505 | Auto | 24 | 2000x1040x780 | 89000 | |
| Giuliano S-110 No. 21Q0100266 | Semi-automatic | 20 | 1690x790x900 | 78120 | |
| SIVIK KC-302A, SEMI-AUTOMATIC, 220V | Semi-automatic | 24 | 1110x930x1720 | 89800 | |
| ATIS TC20 380B | Semi-automatic | 20 | 980x880x960 | 65955 | |
| SOROKIN 15.1 semi-automatic 22 inches | Stand | 22 | 980x760x840 | 59999 | |
| AE&T M-100 for 10-22 inch wheels | Stand | 22 | 960x760x880 | 63188 | |
| NORDBERG 4641 automatic, 220V | Stand | 26 | 770x990x1000 | 118439 |
Tire changers are automatic and semi-automatic. When choosing such a device, it is recommended to pay attention to its technical parameters and dimensions. For small workshops or service stations, compact, semi-automatic economy class models are perfect.
For professional use, it is preferable to buy automatic devices that are equipped with advanced functionality, as well as additional options. If in your daily life you use popular models of tire changers that were shown in our rating, or you use another model of such equipment, please share your recommendations and experience with us in the comments.
