⚙ Best Thicknessers for 2020

In large enterprises or in large home workshops, high-quality and fast wood processing is required. The manual method in this case is not as effective as it takes a lot of time and effort. Therefore, many specialists purchase automatic equipment that can complete the work in a short time, while leaving no burrs. But it is important to choose the right one and know which models are best for the home and which ones for production.

The editors of the site "bestx.htgetrid.com/en/" have prepared for you a rating of the best thicknesser machines for 2020.

Purpose of the device

Planing is one of the key operations in woodworking. Thanks to her, the product takes on a certain shape that meets the accepted standards. However, it will not always be possible to perform this process manually. After all, if a person needs to process an average batch of blanks, it will take the whole day, and maybe more. Therefore, a special machine was invented, which is able to carry out the operation in a minimum amount of time.

Thicknesser machines are used not only in large-scale serial production of furniture, but also in home workshops. Since the machine simplifies the work and increases the number of processed products.

Varieties

Hundreds of different models are sold in specialized stores, but they all differ not only in external parameters, but technically:

• Single-sided thicknessing machines. A distinctive feature of this device is the ability to plan only from the top.
• Double-sided. In this case, a person can plan simultaneously two sides: lower and upper, which increases the efficiency by 2 times.
• Special machines. In this segment, products are sold that are equipped with 3-4 or more cutting parts. They are installed in large industries and are characterized by high speed and high-quality processing.

Single-sided thickness planers are perfect for home workshops. Because they have a simple design, which makes it easy to operate. In addition, these models are easier to maintain and repair. And the dimensions of the machine are small, which makes it easy to move it to the garage.

Features of the device

Most designs, even with two cutting elements, have similar components. There are no special differences between the machines. However, it is important to understand what the device itself consists of, so that it is easier to make a choice.

• Electrical engine. The speed and quality of processing wooden blanks depends on the power of the motor. A good machine can handle a variety of woods, from pine to hard oak. It is also important to pay attention to the number of revolutions per minute.
• Working surface. Most of the machines consist of two parts - the feeding table and the receiving table. All designs have support rollers that reduce friction when moving material.
• The knife shaft is a round device on which cutting elements are located. The knives are made of solid steel and do an excellent job on soft rocks.In more advanced models, they are made from a carbide material that can work with oak. Up to 8 sharp parts are used in professional machines, which reduces the processing time several times.
• Guide element with two shafts. The surface of this equipment can be grooved or rubberized. The main purpose is to reduce the risk of slippage of the workpiece during its feeding.
• The clamping part is designed to reduce the level of vibration that occurs during wood processing. In addition, it supports and presses the tree, which reduces the likelihood of displacement and chipping. Without this element, it is impossible to imagine any design, therefore, when choosing, attention should be paid to the quality of the clamping unit.
• Power transmission device. There can be two versions here: belt or chain. The first option is the safest of all, but you need to constantly monitor it so that it does not deteriorate over time.
• Stanina.

The range of working revolutions is from 5 to 10 thousand per minute, this is quite enough for fast processing. The feeding speed is different, but mainly varies in the range of 5-30 meters per minute. The maximum width is 250 mm for small devices and 2 meters for professional ones.

What is the difference between a planer-thicknessing device?

The main feature of this option is that a special table is provided on top. Thanks to it, the user can rough out the workpiece before feeding it to the bottom and carry out the final operations. Otherwise, this device is no different from standard machines. The processing power and speed are the same.

How does a thicknesser work?

The principle of operation can be described in just two points:

• Adjustment of the layer thickness, which will be removed in one pass. This surgery is best done before starting the main surgery.
• The machine turns on and the workpiece is fed. The shafts of the guide part move the product to the front and the cutting elements remove the chips. The thickness will depend on the parameters that were specified in the first paragraph.

What to look for when choosing

To buy a high-quality device that can process a large amount of wood in a short period of time, you should consider such parameters as:

• Planing depth. In one pass, you can cut both 1 and 3 mm, it all depends on the user's requirements. But also machines can be of great importance, so it is important to pay attention to this criterion.
• Allowable planing width. The standard sizes are 250-400 mm, but they are in demand only in home workshops. In the professional field, the recommended parameters are 1-2 meters.
• Power consumption. An important parameter for household devices, since production machines have an electric motor power of 3000 watts. In private workshops, it is allowed to use equipment with a parameter up to 1800 W. This value is sufficient to ensure fast work.
• Dimensions and weight. If you are buying a large device, then you need to think about the flooring. It is best if it consists of a special plate that can withstand high loads without consequences.

Rating of the best budget machines

CALIBER SSR-1600

A high-quality machine that is assembled in China. The product is intended only for surface treatment of workpieces made of soft wood. Planing is carried out to the size specified by the operator. For greater convenience, the machine is equipped with a magnetic starter, which prevents arbitrary switching on of the device and increases operational safety.

The maximum planing depth is 2 mm, which is a good solution and will suit most tasks. The speed of movement is 6 meters per minute, this is not enough for professional equipment, but for private workshops this value is acceptable. The design has a chain drive, which increases the reliability of the device. Min. and max. The workpiece width is 120 and 204 mm, respectively.The number of knives is 2.

It is powered from a 220 V mains. The maximum power consumption is 1600 W.

Average cost: from 15 750 rubles.

Advantages:

Disadvantages:

ZUBR SRF-204-1500

A combined device that is capable of processing wood products, as well as planing to a certain size. The transition from one operation to another is carried out with a simple press, which is convenient for most operators. The manufacturer has equipped the product with an economical electric motor with built-in overload protection. The workpieces are fed automatically and do not require any effort, which makes operation easier.

There is a convenient tilt adjustment of the guide part, where the minimum value is 0 degrees, and the maximum is 45. To reduce the noise from operation and protect the engine from overloads, a belt drive was installed. The surface of the wooden product is flat and smooth, this became possible due to the high rotation speed of the knife shaft. There is also a place for installing a dust collector, which guarantees constant cleanliness in the work area.

The power of the electric motor is 1500 W, the rotational speed is 9000 rpm. Powered by a regular outlet.

Average cost: from 19,200 rubles.

Advantages:

Disadvantages:

PATRIOT TP 255

A quality machine that provides the user with clean planing of wooden planks. The equipment automatically passes the product through itself, and inside, two blades carefully process the surface. The output is a flat and smooth workpiece that has a certain thickness. The device does not require special knowledge, so it is suitable for beginners and amateurs. The body is made of durable steel, which is covered with a protective paint on top.

The rotational speed is 8000 rpm, while the idle speed is 6 meters per minute. Maximum planing depth - 2.5 mm. Electric motor power - 1800 W. Powered by a regular network.

Sold at a price: from 22,900 rubles.

Advantages:

Disadvantages:

STAVR SDR-318/2000

A good budget option that suits many private workshops. The feeder is manufactured from quality elements, which makes the operator's work easier. Also, the manufacturer has equipped the device with folding tables, which makes it possible to work with large boards.

To keep the workplace clean, a dust collector connection is provided. Transportation is carried out using special handles that are located on the sides of the structure. The complete set contains all the necessary elements for convenient maintenance and operation.

The planing depth varies from 0 to 3 mm. The size of the working table is 690x318 mm. There are two planing knives, which are made of steel. The workpiece feed is fully automatic, so no effort is required. The thickness of the processed material is 5-152 mm.

Average cost: 24,840 rubles.

Advantages:

Disadvantages:

Top best models of the middle price segment

JET JPT-10B

A quality device with a power consumption of 1500 W, suitable for semi-professional use.The maximum rotational speed is 9000 rpm. There are two knives, which are made of high-speed steel, which makes it possible to work with hard and soft wood species.

The maximum planing depth is 2 mm, and material up to 254 mm thick can be used. The dimensions of the machine are 980x470x1120 mm, which makes it possible to place it anywhere. There is a large work desk for added convenience

The average price is 30 655 rubles.

Advantages:

Disadvantages:

Bison RS-330

A reliable device from a domestic manufacturer that processes boards at high speed. The maximum planing width is 330 mm, while the thickness of the workpiece starts from 250 mm. There are two knives for efficient processing. The structure is designed for longitudinal planing. The electric motor is made with high quality, in addition, there is an effective overload protection.

A distinctive feature is the presence of an electronic display, so the setting is more accurate. Also, the manufacturer has equipped the structure with a large work table. There are rollers on the top that make it easy to return the part for reprocessing.

Average cost: from 30,300 rubles.

Advantages:

Disadvantages:

ELITECH PAGE 1833 E

A quality device that ensures clean planing of wooden planks. The board is skipped automatically, where it is cut with two sharp knives. After the end of work, a smooth and smooth product that does not have burrs arrives at the exit. The machine is capable of operating from a single-phase network with a frequency of 50 Hz.

The structure is operated only at positive temperatures up to 40 degrees, while the humidity level should not exceed 80%. There are two feed speeds of the workpiece and a thermal fuse for the electric motor. Also, the working surface is equipped with a passage height scale.

Sold at a price: from 34,800 rubles.

Advantages:

Disadvantages:

DeWalt DW733

An efficient device that will provide high quality processing of any breed. The structure is equipped with 4 support legs, so the cutting head moves smoothly and with high precision. The machine is equipped with a powerful electric motor, which allows processing large workpieces.

The outer part is made of high quality, the dimensions of the device are standard. The idle speed is 10,000 rpm. The noise level is 95 dB, so you should use headphones.

Sold at a price of 65,000 rubles.

Advantages:

Disadvantages:

Rating of the best premium models

PROMA T-400

A quality device that can handle hard and soft rocks in a short amount of time. Power consumption is 2200 W at a feed rate of 13 meters per minute. The maximum planing depth is 4 mm. The shaft rotates at 4500 rpm. The weight of the structure is 147 kg. The knives are made of solid carbide for fast and smooth processing.

The average cost is 82,500 rubles.

Advantages:

Disadvantages:

METABO HC 260 C DNB

Professional device capable of handling wide boards. The minimum supply voltage is 400 V. The power consumption is 2800 V.The planing depth is 3 mm, which is a universal solution and is suitable for most products. The feed speed is average, but this does not affect the quality in any way. The weight of the structure is 71 kg. For greater convenience, there is a wide table on top.

Average cost: 88,000 rubles.

Advantages:

Disadvantages:

Enkor Corvette 220M

A quality device suitable for small businesses. The rated power is 2250 W. Power is supplied from a standard network. The working motor is asynchronous. The type of transmission used is belt. There are two automatic feed rates: 5 and 9 meters per minute. The planing depth is standard and equal to 3 mm. There are 3 knives on the working shaft, so processing is performed quickly and efficiently. The cutting elements are made of carbide. Planing is one-sided.

Sold at a price of 90,000 rubles.

Advantages:

Disadvantages:

Finally

To achieve smooth and high-quality wood processing in private workshops, it is enough to buy a thicknessing machine. It is not necessary to purchase expensive equipment that will pay for itself for a long time, because even in the budget segment there are suitable designs that will simplify planing. If you have experience using the models described in the rating, or more interesting representatives, tell us about it in the comments.