Best tool cabinets for 2020

There should be order in the car service, garage and at home, especially in the tools. However, it will not work to reach it with an ordinary table and a small cabinet. Adequate structures must be used that will separate the keys from the hammer and provide quick access to the desired product. It is not difficult to choose equipment for storing working tools, the main thing is to know the main manufacturers and the selection criteria. The editors of the site "bestx.htgetrid.com/en/" have prepared for you a rating of the best tool cabinets for 2020.

Practical benefits

Some people do not understand why it is necessary to have a separate cabinet for tools in the garage, and even more so at home. After all, most of the products are sold in an already packed case, you just need to put it in a prominent place. On the one hand, this is true, but it is important to understand that the design is, first of all, useful:

• In the event that there is no free space in the garage. Thanks to the cabinet, a person will be able to pack all the tools on the shelves and free up most of the space. Finding the right key, screwdriver or tape measure will become easier. In addition, aesthetic pleasure will appear when everything is in place.
• For safety. It is not uncommon for heavy items to end up on the top shelf, which does not have a lot of space. Therefore, the hammer or drill may hang a little, and if you accidentally hit the top, then everything can fall to the floor. If nothing happens to the hammer, then the drill can definitely break. The tool cabinet will solve this problem, even in a budget solution there is enough space to put large tools.
• To improve productivity. When everything is in its place, it is easier for the master to navigate when looking for a particular device and does not need to waste time looking for a small nut or screw. Many designs are sold with drawers where you can put small items so they don't get mixed up with basic tools.

A tool cabinet will free up space and make your garage or car service cleaner. No jumpers or wires under your feet, everything fits neatly on the shelves, which are made of steel.

What should not be forgotten?

Before buying, it should be remembered that inside the cabinet there will be a large number of heavy and light tools that put a certain load on the shelves. The total mass will turn out to be within 100 kilograms, sometimes this figure is even higher. Therefore, one should take into account what material the frame is made of and what load it can withstand, so that there is no sharp collapse of the shelves.

To answer these questions, it is enough to know the criteria for making the right choice. It is not recommended to buy a product just by its appearance, since external performance will not add durability and reliability.

Varieties

Quality and popular material for cabinet making is steel. It is advisable that stainless or galvanized be used. The use of aluminum is also allowed, it is many times stronger than chipboard or MDF.However, there are cabinets made of other materials, which can differ in both strength characteristics, and sometimes only in price.

For storing heavy objects, screwdrivers, keys, screws, etc. used cabinets made of:

• Metal;
• Wood;
• Special plastic;
• Combined models.

To better navigate the store, you should know the main advantages and disadvantages of each solution.

Hardware

Most often, steel is used in the production of such structures. Depending on the model, the thickness is 0.5 or 1 mm. The latter is rare and more often only in professional and expensive versions. The advantage of the metal model is its carrying capacity and durability. In addition, it differs in the following parameters:

• High strength characteristics;
• Stability at maximum load;
• Durability;
• Does not deform over time.

If stainless steel or a material with a protective coating was used in the production, then you do not need to care for such options. Also, the advantage of metal tool cabinets is resistance to sudden changes in temperature and open fire. This complies with fire safety regulations. Therefore, such performances are always found in large and small car services. The external design of most models is universal and will suit any interior.

The sizes of each option are different, so a person can easily find a design that fits easily indoors. It should be remembered that most of the space inside the cabinet is taken up by shelves, drawers or special containers for storing small materials. In some versions, there are peripheral surfaces that make it possible to place any tool.

Metal models are sold in two types - stationary and mobile. Here, the choice depends only on the preferences of the buyer, since both options are reliable.

Wooden cabinets

This performance is typical only for those who assemble structures on their own, because they are rare in the store. But even these options are popular. Of course, they do not tolerate exposure to high humidity, which is why they must be used only under certain conditions, however, the advantages of such a solution are also present:

• Low cost when compared with products made of metal;
• Good lifting capacity;
• An attractive exterior that fits almost any design.

Despite the advantages, wooden models are not without disadvantages:

• Low service life;
• Poorly tolerates high humidity;
• Flammable if exposed to open fire.

These problems are solvable. To increase the moisture resistance and increase the service life, the cabinet must be treated with special compounds, while it is recommended to do this at least once a year or as it wears out. The structure will be strong and durable.

Plastic models

The main advantages of such designs are low cost, weight and easy transportation. However, the product is not intended for storing heavy tools, because it does not have sufficient strength and deforms under high loads, and sometimes even breaks.

Most often, plastic cabinets are used to store small tools that need to be constantly moved from one place to another. In addition, the design allows you to create a whole system of containers that can be installed from the top or bottom.

Most mechanics store nails, screws, bolts, and parts inside plastic cabinets. Although such a solution cannot replace a full-fledged wardrobe, it will be an excellent aid that will help out at the right time.

Combined products

The option is suitable for those who have a wide base of instruments with different weights. A person will be able to more rationally distribute usable space by simply placing all important items inside the cabinet.

Models made of plastic and steel are very popular. The reason for this is the low cost. For example, the entire frame is made of metal, and the drawers are made of plastic. Convenience and practicality goes to a new level.

There are practically no disadvantages to this solution. The only thing that a person will have to decide on is how to correctly place all the devices and tools so that everything is in place.

Finding the right cabinet is not so difficult when you have an idea of ​​the materials that were used in the production. The selection criteria for tool cabinets are simple:

• Dimensions;
• Carrying capacity;
• Strength;
• Corrosion resistance;
• The presence or absence of sliding elements.

Rating of quality models without drawers

Viking Н-ШХ-О

A quality device that can accommodate a large number of instruments. The case is made of stainless steel, there are two flaps, one of which is transparent. The windows are made of polycarbonate. Additionally, the structure is equipped with a special lock that will not allow outsiders to get inside.

The inner wall is peripheral, so a person can place a special tool holder inside. For convenience, there are runner legs, which makes it possible to move the product using a special loader.

The average cost is 32,000 rubles.

Advantages:

Disadvantages:

ERGO 181 No. 1

An inexpensive cabinet that will allow you to place the necessary equipment, fasteners, etc. inside. The outer part is made of steel, 0.8 mm thick, which has a positive effect on strength and reliability. The maximum load bearing capacity is 250 kg.

There is a crossbar mechanism that locks the sash. The complete set is individual, it all depends on the user's requirements. The shelves are capable of withstanding loads of up to 100 kg. The step of installing the shelves is 10 cm. There is a special connector for the cable, which allows you to connect org. technique. Powder coating, durable.

Sold at a price: from 20,000 rubles.

Advantages:

Disadvantages:

PRACTICE TS 1095-002000

A high-quality tool cabinet that is suitable for installation in industrial premises, as well as car services and private workshops. Dimensions allow for medium and large appliances. The shelf can be adjusted in steps of 50 mm and the height can be adjusted according to specific requirements. If you want, you can put plastic containers inside, but they are purchased for a fee. The lock type is key. The total weight is 35 kg.

The average cost is 11,500 rubles.

Advantages:

Disadvantages:

Dick VL-052-01

A versatile cabinet that is suitable for most businesses and services for car repair and maintenance. The outer part is made entirely of metal. The set includes 4 shelves, made of galvanized steel, withstand a load of up to 100 kg. There are also blue doors. The lock is not provided, but if you wish, you can make it yourself.

Sold at a price: from 22,000 rubles.

Advantages:

Disadvantages:

Ferrum Titan 43.1201

An expensive model with transparent glass doors. The hinges are housed inside to prevent burglary. There is a crossbar lock. The shelf adjustment step is 50 mm, they can withstand a load of up to 200 kg, while the structure itself is capable of carrying up to 1.5 tons. The set includes 3 shelves.

The average cost is 39,700 rubles.

Advantages:

Disadvantages:

Rating of popular tool cabinets with drawers

Verstakoff PROFFI PYa4P8

Reliable model that can withstand high loads. The product is divided into two compartments, each with three shelves. At the bottom there are two drawers. The flaps have special holes that allow you to attach small tools. The product is of high quality and reliability. Easily tolerates exposure to low temperatures and humidity, as it is treated with special agents.

The average cost is 35,000 rubles.

Advantages:

Disadvantages:

Metalware Plant T 1.1.4.4

A capacious device designed for installation in production areas or in car services. This device makes it easier to store tools and accessories. The outer part is painted with a special epoxy paint, which prevents the corrosion process and increases the strength characteristics. The structure is equipped with a high-quality latch lock made in Germany.

The average cost is 20,000 rubles.

Advantages:

Disadvantages:

PRACTICE TC-1995-041040

A durable device suitable for a variety of applications, including storing heavy vehicle parts. Each part is painted with powder paint, which increases the strength characteristics. The type of lock used is key. Thanks to the high-quality steel used in the manufacture, the device is able to withstand high loads and not deform.

Sold at a price: from 31,500 rubles.

Advantages:

Disadvantages:

Dick VL-052-08

One of the most expensive, but high-quality cabinets, allowing you to place heavy equipment and elements inside. For storage of small parts, screwdrivers and similar products, there are 5 boxes that can withstand a load of up to 50 kg, while the shelves have a value of 100 kg.

Sold at a price: 45,000 rubles.

Advantages:

Disadvantages:

Covolt Matrix tool cabinet

Two-piece model with mobility and 10 drawers. The structure can be easily moved using special wheels. All basic tools can be stored inside, in addition, the drawers are locked with a key. Dimensions are small, which makes it possible to install it anywhere.

Sold at a price of 15,000 rubles.

Advantages:

Disadvantages:

Finally

When looking for a tool cabinet, it is important to pay attention to every technical parameter. Because the strength and durability of the model depends on it. If you have experience of using the products described in the rating, or more interesting representatives, tell us about it in the comments.