Which electric convector is better: a review of popular models for 2020

In recent years, electric heating has become a popular heating method for a house, summer cottage or apartment. Gas is not available everywhere, and it cannot be supplied to some outskirts or villages, and somewhere the cost of such heating will cost much more. Also, gas can be banned in basements or above the fourteenth floor. Solar panels are a good option, but not everyone can afford this method of heating. The cost of even one solar battery is high, and you definitely need several of them. Plus, this heating option is not yet very popular in our country. Central heating in apartments in winter will have to pay a significant amount of money, and it does not always provide a sufficient temperature for a normal life, so many want to abandon it altogether.

It is because of all these reasons that the electric convector is for many the best option for heating. It suits almost everyone. This device is practical, efficient and simple to operate. Difficulties can arise only when choosing a model, for this you need to understand the main characteristics of the electric convector and the place of its installation.

Design and working principle

The device consists of only two parts - the heating structure and the body itself. The principle of operation is that air enters the lower part and is released already warm through the top. The vents are angled to help air masses move upward. They move in a parabola and eventually descend. After a while, the air cools down again.

A convector is basically a silent device that does not cause any inconvenience. But some models have a built-in fan that speeds up the process. These convectors emit a certain sound that not everyone likes.

This appliance is popular because the walls only heat up to 60 degrees, so it is safe for home use. Children or animals cannot be burned by touching the body. The material practically does not heat up. That is why this type of heating is often chosen for a children's room or at home with children. If necessary, the device can be left unattended. It is protected from unexpected drops and overheating.

Choosing an electric convector

How to choose an electric convector? This is the question that a person asks when buying. Considering all the important characteristics, the device will last a long time and will be convenient to use.

Power

Power is the main parameter that must be considered when purchasing such a device. You need to pay attention to it, not the beautiful appearance of the convector. To determine the power that is needed for your apartment, you need to know the height of the ceilings and the area. In the store, a consultant should help you choose the right device. But they do not always have the necessary information. In order to calculate this parameter yourself, you should take it on the basis that 10 sq. meters need 1 kW (1000 W).Moreover, the height of the ceilings should not be more than 2 meters 70 cm.If the height of the room is higher, then more power is needed by 10 percent for every 10 cm.

The number of heating devices in a room depends on the number of windows. If the room has two windows, then there should be two electric convectors. Only in this case the temperature will be normal for finding. When heating a basement and corner room, much more power may be required.

Mobility

It is worth considering in which room, and where exactly the convector will be located. There are three options - wall, floor and recessed. There is also a universal device that can be used as wall or floor.

If the client wants to hang the convector on the wall, then you need to see if there are fixtures and if the device is suitable for this. In cases of mobile use, you need to pay attention to the wheels, which should be included. Otherwise, the device will need to be constantly lifted during transportation, which is not very convenient. It is important that the legs are comfortable and stable. It is also worth thinking about how to install the wire so that it does not interfere with walking around the room.

It is best to install the convector under the window, then cold air will not enter the room. The height from the floor and the gap to the wall should be approximately 20 cm.

The size

Another important parameter is the convector's width and height. The thinnest device can be only 15 cm high, but there are options with larger sizes. But do not think that a small device cannot be used for a large room.

When choosing, you should pay attention to the power. Work efficiency does not always depend on size.

Additional functions

Additional functions can be built into the device that contribute to comfortable operation.

• Ionizer. This function is needed to saturate the air with ions, which increases immunity and helps to improve the human condition.
• Frost protection. If the room temperature is below five degrees, this mode is automatically activated.
• Clever programming. You can set certain parameters that the device remembers and, if necessary, sets again. This saves a lot of time and is an important feature when there are constant power outages. You can control the device through the application on your smartphone. This feature has many advantages.
• Shutdown when a certain temperature is reached. This indicator can be adjusted. In this case, excess electricity will not be consumed, and the room will always have an optimal temperature. The convector also turns on when the room is cooled down below the set point.

The display, remote control and timer are optional parameters, but they greatly simplify the use.

Heating element types

In electric convectors, the heating element can be of three types:

1. Needle-like. The main plus is rapid heating and cooling. You cannot use it in rooms with high humidity, because the system is completely unprotected from moisture. The price of such an electric convector is much lower, but often the devices do not differ in durability. Such a system is rarely used.
2. The heating element is a tubular heating system, which is used much more often, because such a device is durable and easy to use. If necessary, you can install the convector in the bathroom. The disadvantage of this system is in the sounds that the device emits when heated. It resembles a crackle.
3. Monolithic heating element. Such a system is highly efficient because heat loss is minimal. The device is completely silent.

Thermostat types

There are two types of thermostat: mechanical or electronic. He is responsible for maintaining the temperature. Each of these two types has its own pros and cons. Let's consider in more detail.

Mechanical

The main plus is the cheap cost of the electric convector. But there are also quite a few downsides.These include: the consumption of a large amount of electricity, poorly holding the temperature, clicks when turning on and off.

Electronic

If the device has an electronic thermostat, then its price is much higher, but the number of advantages is much greater. During operation, there are no extraneous sounds that can annoy the user. The temperature error is minimal, and the amount of energy consumed is much less than in the first form. The temperature can be controlled remotely, which greatly simplifies operation. There are several temperature settings.

Pluses of an electric convector

The electric convector is chosen by a large number of families because it has significant advantages over other heating methods. Let's consider the main ones:

1. Easy to install and lack of any additional work. There is no need to spend a lot of time getting permission and installing. It is enough to buy a device and connect it.
2. Affordable price. Everyone can afford such a heating method. The average price is $ 80-120, but there are also more budget models.
3. Good efficiency. The amount of losses is minimal.
4. Oxygen conservation due to the absence of a heating coil. Many heating devices dry the air significantly, making it difficult to breathe in the room. The electric convector is not one of them.
5. Compliance with the set temperature.
6. The noise level is minimal, which does not interfere with comfortable work or even sleep.
7. Rapid heating of the room, which starts almost immediately after switching on.
8. The design of the device is designed so that it would not be possible to cut yourself on its corners.

Installation recommendations

There are a few simple rules when installing an electric convector:

1. Before installation, make sure there is no draft in the room. Otherwise, the operation of the device will be impaired.
2. Do not install the device in a room with flammable substances. It's not safe.
3. When installing in a bathroom or in a room with high humidity, select models with protective properties.
4. The convector must be installed at a distance of at least 10 cm from the outlet. But if you wish, you can make a cosmetic installation, then the device is connected directly, and there will be no plug or socket.

Manufacturer's choice

A fairly large number of manufacturers offer convectors, so choosing a device is not so easy. Top manufacturers:

• Zannussi is a proven company that ensures the reliability and long service life of instruments.
• Atlantic. This company is known to many for its innovative solutions and a large selection of products.
• Electrolux differs in budgetary cost of devices and high-quality devices.

When buying, be sure to pay attention to the warranty period. You should buy equipment only in a trusted store with a lot of positive reviews. You can order the device on the Internet, having previously studied the characteristics or view the convector in the store. You should compare the cost and basic parameters, and then make a choice.

The best electric convectors

Convector Electrolux ECH / AG2-1500 T

The Electrolux convector provides fast heating of the room and quiet operation thanks to a powerful heating element with a monolithic structure. The service life of the device is at least 20-25 years, which is an important plus when choosing a convector. There is a thermal protection system that turns off the convector when a certain temperature is reached. Thus, the device is safe and overheating is excluded.

The device can be installed in rooms with high humidity, and it is also protected from splashing.

Power - 1500 W, which corresponds to a heating area of ​​up to 20 square meters. Weighs only 3.2 kg for portability.It can be easily moved if necessary.

There are a lot of positive reviews for this model on the Internet. Users note many advantages of the Electrolux convector.

Advantages:

Minuses:

Convector REDMOND RFH-С4519S

The main advantage of this model in comparison with others is the ability to control it from your phone. To do this, just download a free application in the Play Market on Android and the App Store for Iphone. There is no need to wait until the apartment warms up, you can set the desired switch-on time and other parameters in advance. This greatly simplifies the use and saves time.

The kit contains instructions for use, but the device is very easy to use and does not require additional settings.

Power - 2000 W. Ideal for rooms up to 20 square meters. Price - 6000-6500 rubles. For the stated parameters, it is fully justified.

Advantages:

Minuses:

Convector Timberk TEC.E11 M 1500

The Timberk electric convector provides instant heating. It is completely safe and resistant to possible voltage surges. When falling, Timberk turns off.

You can install the device either on the wall or on the floor. The set includes legs.

The device provides an even distribution of heat throughout the room.

Power - 1500 W, suitable for areas up to 17 meters.

Advantages:

Minuses:

Convector Noirot Spot E-5 750

Convector Noirot Spot E-5 750 is one of the Noirot model range with power from 500 to 2000 W. The products of this company are distinguished by their reliability and quiet long-term operation. It can be used 24 hours a day, 7 days a week. The housing is protected from moisture - IP 24.

Model weight - 3.6 kg. Power - 0.75 kW, suitable for 8-10 square meters.

A large number of users are satisfied with the operation of the electric convector.

Benefits:

Minuses:

Convector Scarlett SCA H VER 14 1500

The Scarlett convector is distinguished by its budgetary cost and ease of use. It is ideal for any space. This model can be fixed on the wall or placed on the floor using the included legs.

In case of overheating, the device turns off automatically.

The power is 1500 W, which is suitable for a room up to 15 square meters. Weight - 4.2 kg.

Advantages:

Minuses:

An electric convector is a good heating option in the cold season. If all the important characteristics are taken into account, then choosing a device will not take much time.