Rating of the best profile cutters for 2020

A reliable connection of metal profiles and plasterboard cladding materials is achieved thanks to the stitching device. The tool is capable of replacing self-tapping screws and a screwdriver, while the fixation will remain durable and resistant to mechanical stress. Today, hundreds of models are sold from different manufacturers, some are capable of performing complex operations, while others differ only in price and ergonomics. To make it easier to navigate in the choice, the editors of the site "bestx.htgetrid.com/en/" have prepared for you a rating of the best profile cutters for 2020.

Features and varieties

The advent of drywall changed construction in a new direction. Today it is used for most types of repair work. Partitions are used: in residential buildings, public buildings, educational institutions and offices. Thanks to the facing material, builders create multi-level ceilings, which makes the room cozy and allows you to hide the communication systems.

Cladding is only a small part of the scope of drywall applications; it is also used to create designer columns or facades. And everywhere there is only one requirement for it - connection reliability and durability. Therefore, most professionals prefer to use a metal profile cutter. The tool has good durability and works flawlessly.

The stores sell three modifications of the cutter:

• Small in size. The variant is intended for domestic use. The advantages of the model are ergonomics and low price. The quality of the connection is no different from premium products, but there are also drawbacks, for example, there is often a defect or poor-quality tool that breaks after a single use.
• Reinforced. Such designs are intended for construction work by repair teams. It is recommended to use only for wall cladding on a domestic or commercial scale. Because the tool will not withstand excessive load and will break.
• Professional. It is used only when it is necessary to carry out complex projects for decoration or cladding of floors, ceilings or walls. The model is indispensable when performing major overhauls in production areas or when creating partitions for office premises.

The first two options attract users with their low price and compactness. They are easy to transport in a pocket or toolbox. Following the recommendations specified by the manufacturer, the service life of the device will be from 2 to 4-5 years. However, the last figures are possible only if the cladding is carried out every six months.

A professional cutter is an irreplaceable assistant for the implementation of complex construction projects. The advantage is the ability to operate for an hour or more, while it has wide functionality, which allows operations to be carried out faster and better.

There are other types of cutters: flexible, devices using a needle roller and cassette. The one that is suitable for the current job is selected. Because not all tools can be created equal.

What is important to remember when working with a flasher

There is nothing difficult in using the cutter. But, despite this, it is necessary to know the principles of work, so the connections will be strong and durable.

• To connect, the parts are superimposed on each other;
• The fixation point should be in the working area of ​​the tool;
• The handles of the device must be brought down to a characteristic click.

The resulting hole will help you quickly connect the outside of the elements. During operation, countersinks create special edges that are folded and fixed, which allows you to get a reliable connection. The maximum punching layer is 1.5 mm and the diameter is 5 mm. In some cases, it is allowed to use a chamfer for chamfering.

Tool advantages

Cladding sheets are fixed using two popular methods:

• Use of special adhesives;
• Fixation on a metal frame.

The second option is used most often, despite the fact that it loses a small percentage of usable space. In return, a person gets reliability and a long service life. To fix the guides, you need to make a minimum of effort.

The main advantages of the cutter include:

• For high-quality fixation, you do not need to use self-tapping screws or screws, this solution allows you to significantly save on consumables.
• Low cost of installation work, since you do not need to buy a screwdriver;
• The cladding material will not have holes, which will retain a pleasant appearance;
• There are no burrs, irregularities and roughness, which also has a positive effect on subsequent design work;
• The ability to use replaceable parts. However, most of the work can be done without them, especially during cladding operations in a residential area;
• Tight fit of the plasterboard sheet to the metal profile, while no hat will stick out;
• For work, a minimum of conditions are required, it is enough to have good lighting;
• Some cutters are lightweight and have good ergonomics, which makes it possible to hold them in one hand;
• A wide choice in shape and technical characteristics, which will help you choose a reliable model at the lowest cost;
• To connect the facing material, you only need to press the lever and make a little effort;
• A quality connection that will last for decades.

Basic recommendations when working with a cutter

For high-quality fastening, remember:

• Before starting work, you should make sure that you are using a tool that is suitable for the current thickness of the metal profile. If not, it is recommended to replace the device with a suitable one.
• Sharp displacements of parts and tools must not be allowed. Because it will affect the quality of the connection.
• It is not recommended to apply strong mechanical impact, as the device will break.
• The installation of the device must be in a certain position.
• It is forbidden to punch a hole in the places where the metal profiles join. It is also not allowed to connect elements in the area of ​​material build-up.
• For the device to last for a maximum period, it must be regularly lubricated. It is sold in hardware stores and will fit most devices.

Rating of budget representatives

Sparta 87952

One of the popular budget products that is suitable for high-quality connections. Made of durable steel that does not rust or deform over time. The metal part is equipped with special jaws. They facilitate efficient punching of the material and also fold the edges into the interior. The maximum fixation thickness is 9.5 mm. The tool is equipped with a rubberized grip for increased ergonomics.

Sold at a price: 510 rubles.

Advantages:

Disadvantages:

"888" 300 mm 6850501

A good tool for home use, which can be found at a price: from 480 rubles. Thanks to him, it will become easier to sew a metal frame and connect drywall. But it is suitable exclusively for infrequent use, since it has a limited resource of work.

Made from cheap steel. On the one hand, strength is present and a person will receive a good tool for a small cost, but with frequent use, the chance of breakage is 75%. "888" 300 mm 6850501 is suitable for those cases when a person needs to perform minor repairs.

Sold at a price: from 485 rubles.

Advantages:

Disadvantages:

Encore cutter for metal profiles 250 mm

The model will provide a high-quality connection of metal profiles up to 0.8 mm thick. For fixation, the punch-through method is used. The working part is made of class A structural alloy steel, which increases strength and resistance to the corrosion process. The handles are fully rubberized, so they do not slip during difficult operations and increase ergonomics.

The Enkor 250 mm does not provide a wide working area, which can cause difficulties when connecting corner sections. All operations are carried out with only two hands, since there is no return spring.

The average cost is 570 rubles.

Advantages:

Disadvantages:

FIT for drywall

The option is more expensive than the previous ones, however, it allows you to create a high-quality connection in any area. The work is carried out with only two hands. The advantages of the model include a wide working space.

The fixing time is 2-3 seconds, while the result obtained in terms of strength is in no way inferior to traditional fixing methods. The body is made of tool steel. The handles are made of durable plastic for a comfortable fit.

The average price is 660 rubles.

Advantages:

Disadvantages:

SIBIN 3132, 300 mm

A popular model that belongs to the mid-budget class. The maximum thickness of the elements to be joined is 8 mm. Manufactured from tool steel for improved corrosion resistance and increased reliability. However, the work requires more effort, which creates some problems, such as slipping of the handle. Also, the firing pin is often skewed, which negatively affects the quality of the connections.

The average cost is 660 rubles.

Advantages:

Disadvantages:

Rating of the best representatives of the middle segment

STAYER PROFI 3130_z01

A robust tool with a reinforced metal body that is suitable for joining 0.6 mm metal profiles. The shape of the throat makes it possible to work in hard-to-reach places. The handles do not slip when pressed firmly for increased comfort. The body is made of tool steel.

The average cost is 1,550 rubles.

Advantages:

Disadvantages:

Matrix 87951

A convenient device that allows you to work with one hand. It is sold in reliable packaging, after opening there are no traces of grease and no strong odors. The external design is neat, there are no cracks. Thanks to the lever mechanism, even beginners can work with the cutter. Because the other hand does not need to be used, it can maintain the profile to keep the connection smooth.

The handle is completely rubberized, the material is pleasant to the touch and does not slip even with wet hands. The size of the working area is small, so it will not work to use the tool in hard-to-reach places. This product also makes it easy to sew two 0.6mm metal profiles.

The average price is 1,200 rubles.

Advantages:

Disadvantages:

ZUBR Master 3135

A reliable tool capable of working with profile thicknesses from 0.8 mm. The product is made of durable steel that protects against corrosion and rapid wear. The punch is made with high quality, punches two metal profiles in a minimum time.

The handles are comfortable and do not slip. The only drawback that most buyers note is that it bends the slots poorly, which makes it necessary to use auxiliary tools.

The average price is 1,280 rubles.

Advantages:

Disadvantages:

Rating of the best premium tools

Knauf Pliers for fastening PS and PN profiles

A professional tool that will help you complete complex operations in a short period of time. The only drawback is that during the connection, you should make small efforts, while working with one hand will not work.

The average cost is 4,300 rubles.

Advantages:

Disadvantages:

Knipex 340 mm

An expensive model that allows reliable fixation of 1.2 mm profiles. Thanks to the high-quality transmission mechanism, no effort is required. Everything happens quickly and reliably.

The handles are made of plastic and polyurethane. Therefore, the chance of slipping is minimal. In addition, most operations can be performed with one hand. The slots fold well for a secure and durable connection.

Sold at a price: from 11 600 rubles.

Advantages:

Disadvantages:

EDMA MASTER PROFIL 062055

An efficient device from a French manufacturer that allows you to connect metal profiles 1 + 1 mm, which makes it in demand in professional activities. The maximum gripping depth is 35 mm. The handles are made of polyurethane and plastic, which prevents sudden slippage and improves the quality of the operations.

The average cost is 5,600 rubles.

Advantages:

Disadvantages:

Finally

The first thing to do before buying a cutter is to decide on the type of work. After all, if a person needs to use it only once, then a good budget model will do. Despite the price, it is necessary to choose a product only for technical characteristics, convenience and quality. If you have experience using the models described in the rating, or more interesting representatives, tell us about it in the comments.