When a person does welding work, it is important to protect the skin and eyes. Therefore, most specialists buy the appropriate equipment that will not damage the retina and will last for a long period. The welding mask will protect the head from possible damage and inflammation. However, it is also important to choose special glasses that will allow you to work with maximum comfort.
The editorial staff of the site "bestx.htgetrid.com/en/" has prepared for you a rating of the best protective glasses and light filters for welding helmets for 2020.
Content
Varieties
In total, there are three types of protective elements: with a constant value of darkening, with different (most often such models are called "chameleons") and diopter (intended for people with low vision).
The first option is classic and common. The device is made of glass that is mixed with special materials. They have different dimming, so a person needs to independently select glass for each type of work carried out. Otherwise, there will be little sense from such a decision.
The advantage of these models is that they are durable. Sold in all specialized stores at a low price. The disadvantage is that they are inconvenient in operation, since in order to see the welding place, you will have to constantly remove the mask so as not to make a production mistake. And you will have to interrupt constantly to check the condition of the part or electrode.
Chameleons are many times more convenient than classic models, because they make it possible to work safely and look at the part without constant removal. The shade adjustment is automatic and adapts to the specific type of welding. Due to the new technology, the cost for such models is several times higher.
The main structural element is the screen, which is made on liquid crystals. It is important to take into account that its functioning is impossible without additional power supply. Some manufacturers equip the device with a solar panel, which allows you to use the mask without interference when welding outdoors. The design is functional and does not require special skills to use.
The only drawback of this option is the high cost and the need for a lean attitude to the product. Otherwise, the filter will deteriorate after a few months and you will have to buy a new one.
Diopters are intended for use by people with vision problems. Because wearing glasses and putting on a mask on top is not always convenient. Some manufacturers produce models that are suitable for a particular person.
The product consists of plastic lenses that are selected individually for each user. The way of working is the same as that of a magnifying glass. For this reason, some workers with normal eyesight use these models for minor operations that are not possible with standard filters.
What to look for when choosing?
Arriving at the store, you can see dozens of different models of protective glasses. Some will be useful for one type of work, while others will generally be universal.Therefore, it is important to understand what equipment and components a person will use for welding, only then buy a product and not forget about the budget.
If there is not much money and a person does not often use glass, then an inexpensive filter that has a permanent dimming is suitable. They are picky about care and will suit most types of work. In the opposite case, when the user is constantly faced with welding, it is better to purchase chameleons. Although they have a high price, their efficiency is several times higher.
The cost of each model is different. Despite this, it is better to buy light filters in the middle price segment, since they have an excellent price-quality ratio. Cheap products will not last even two months as they become unusable and require urgent replacement, so a person will simply spend money.
When buying a classic light filter, it is important to know one rule that will help make the choice as fast as possible - the darkening depends on the thickness of the electrode and the current strength. If you take dark glass and a thin electrode, then there is a possibility that a person will not see the work area, which will lead to catastrophic errors. Respectively,
the smaller the diameter of the heating element, the lighter the glass should be.
Then the welding area will be visible, which creates a comfortable working environment.
The shade level is marked 9, 10, 11, etc. DIN. There is also another designation method - C4 or more. The higher the value, the better the darkening of the filter.
When buying a “chameleon” type filter, in which the dimming changes automatically, it is better to give preference to a model with an indicator of 9 DIN or more. This option is more acceptable for both home and professional use. In addition, one should not forget about the speed of darkening and lightening, so if these characteristics are of a large value, then the welding will be of better quality.
Diopter filters are purchased taking into account vision. Then the purchase will bring maximum benefit and comfort. Such models cannot be chosen at random, because a person cannot independently determine the correct degree of magnification. It is best to consult a doctor who will issue a certificate. She will help you choose the best option that will not burden your eyes.
The last but important point that some users forget about is the compatibility of the filter and the welding helmet. There are manufacturers on the market who use universal mounts, and there are those who prefer individual ones, they are suitable only for a specific model.
Rating of the best protective glasses and light filters
Glass 102 * 52 mm. Transparent
A high-quality filter that is designed to perform simple operations. The mount is universal. Therefore, it is suitable for use in any welding mask. Thanks to this element, a person will protect his eyes and skin from splashes of hot iron. Produced by many Russian enterprises at a low price. If a person is often engaged in repair and restoration work, then it is better to purchase a set of such glasses for 6 rubles apiece.
The product is not designed for difficult welding operations as it will not provide adequate eye protection from UV light. The product copes with splashes and sparks perfectly.
The average cost is 6 rubles apiece.
Advantages:
- Simplicity;
- Universal mount;
- Good splash protection;
- Reliability;
- Low cost.
Disadvantages:
- Not found.
102 * 52 TS-6/12
A glass filter that protects the eyes from the negative effects of ultraviolet rays and prevents hot particles from getting on the skin. Produced by many Russian companies, it is available in online stores and specialized supermarkets.
The coating is made of high quality, so the product will not deteriorate from frequent use and will be able to provide the owner with adequate protection for a long period.With daily use, it is better to buy glass in small sets, which will save money and stock up on important elements for a couple of years in advance.
It is sold at a price of 14 rubles apiece.
Advantages:
- Good workmanship;
- Reliable protection;
- Universal placement;
- Low price;
- Excellent dimming.
Disadvantages:
- Not found.
Glass for mask 10 D, 50x100mm.
Popular solution for medium masks. The filter is made in accordance with the required technologies. Therefore, it protects the eyes well from the effects of a dazzling glow. The shade level reaches 10 DIN, which is an excellent result and is suitable for many semi-professional types of work. To perform more complex operations, it is necessary to purchase high-quality equipment that is highly resistant to the negative effects of ultraviolet and infrared radiation.
Filters do not have one specific brand. Counterfeits are rare. Basically, glass withstands the recommended loads for the longest possible period. Therefore, the quality of manufacturing is at a level that allows you to use the product without fear of eye health.
The average cost is 16 rubles apiece.
Advantages:
- Reliability;
- Good execution;
- Affordable price;
- Suitable for medium masks;
- Universal mount.
Disadvantages:
- Not found.
Light filter for welding mask 100x50mm
An excellent light filter suitable for complex operations. Reliability and long service life have made this product a real find in the hobbyist field. The product does not need constant maintenance, the main thing is to comply with the minimum operating requirements and the glass will serve the established period without any problems.
The mount is standard, so the user will not have problems with installation, which is also a big plus. It is sold in many stores at a price of 25 rubles per piece. This is the optimal cost, which gives a person reliability and quality without additional overpayments.
Average price - 25 rubles. per piece
Advantages:
- Efficiency;
- The workspace is clearly visible;
- Suitable for most masks;
- Protects the eyes.
Disadvantages:
- Not found.
Light filter No. 4. 121x69 mm.
An excellent product that has good shading and eye protection when welding. Produced in large quantities, but in the store you can buy by the piece.
The product is made using modern technologies, which is confirmed by certificates. It does not require special care. Under normal operating conditions and infrequent use, the model will last for a year or more.
It is sold at a price of 24 rubles apiece.
Advantages:
- Suitable for large masks;
- Reliability;
- Quality manufacturing;
- Good shading performance;
- Long service life.
Disadvantages:
- Not found.
ESAB 60х110mm
An excellent filter for welding helmets with good durability and reliability. The inner glass is made of polycarbonate, which prevents quick deterioration of the product. The outer is made of plastic.
The shops sell a variety of products that have a protection degree of 9 and 13 DIN. Therefore, choosing the best option is not difficult. Manufactured in Sweden, the product is of high quality and meets European safety standards. In addition to protection, glass reduces eye fatigue and makes it possible to carry out work many times longer.
The average cost is 50 rubles per piece or 1,091 rubles. for a set of 25 pieces.
Advantages:
- European quality;
- Reliability;
- Safety;
- Durability.
Disadvantages:
- Not found.
Svarog XA-1001F (G) 110 × 90
Chameleon with manual adjustment, which is suitable for professional work in a large enterprise or in the construction industry. There are two arc sensors. Light sensitivity works quickly and smoothly, which will not create problems when performing complex operations.The minimum shade is 9 DIN, the maximum is 10 DIN. In an enlightened meaning, this parameter is 4 DIN.
The response speed is 0.01 ms. Clarification occurs in 0.1-0.9 seconds. The product provides the user with protection from IR and UV rays of any degree. The control sensor is located inside the device. It is powered by a solar battery. The size of the viewing window and cartridge is 96x42 mm and 110x90 mm, respectively.
Manufactured using the latest European technologies. The product is distinguished by its safety, durability and strength. Under normal conditions of use and storage, the filter will last more than 2 years.
Sold at a price of 3,560 rubles.
Advantages:
- Build quality;
- Response speed;
- Smooth adjustment;
- Universal mount;
- Solar battery;
- Reliability.
Disadvantages:
- Not found.
K-304 KEDR
One of the best light filters to make your welding job safer. It is used to protect important organs, including the skin, from exposure to rays and splashes of incandescent elements. The product is fully automated and suitable for any operation. Darkening occurs instantly, so the person will not experience discomfort due to the dazzling rays. Upon completion of welding, the darkening returns to its original value in less than a second.
The adjustment takes place within 5-8 DIN for simple work, and 9-13 DIN for professional. The product contains 4 optical sensors, which makes operation safer and more reliable. For convenience, there is an external regulator, so a person will easily select the optimal value.
Power is supplied by a solar panel mounted on the front. There is also a removable lithium battery. Dimensions - 140x126x39 mm. The brand belongs to a Russian organization, the product is manufactured in China.
The average cost is 2,600 rubles.
Advantages:
- Convenient adjustment;
- Instant work;
- Universal mount;
- Safety;
- Adequate price.
Disadvantages:
- Not found.
Svarog LY600A
The best domestic product. The product is used in the construction of any structure and is used only by professionals. The filter is made according to modern technologies, taking into account the opinion of consumers, which makes the product an excellent solution not only for use in production, but also in private workshops. The shade level in the normal state is 4 DIN, during welding operations this value will change from 9-13 DIN.
The response speed is 0.0001 s, which guarantees a person reliability and safety. Dimming takes a little time and occurs in 0.9 seconds if the dim value is 13 DIN. The product has 2 photosensors. It is powered by a solar battery. For convenience, there is a built-in lithium battery and a charge indicator. There is a possibility of manual adjustment, which greatly facilitates the application. Dimensions - 110x90x9 mm.
Sold at a price of 1,700 rubles.
Advantages:
- Maximum protection value - 15 DIN;
- External dimming adjustment;
- Instant actuation;
Safety and security of important organs; - Anti-darkening flash;
- Charge indicator;
- Optimal dimensions.
Disadvantages:
- Not found.
Finally
When carrying out welding operations, an employee may forget to put on overalls and shoes, but it is strictly forbidden to work without a welding mask. IR and UV rays that are generated in the process can damage vision. Every experienced welder understands this, so he approaches work responsibly and often prefers to use his own protection, in which he is confident. If you have experience using the models described in the rating, or more interesting representatives, tell us about it in the comments.
