Best tool boxes for 2020

Any professional master has everything laid out on shelves and bags. After all, order at the workplace speeds up the performance of any work 2-3 times. Therefore, the first thing a beginner needs to learn is discipline. Of course, there are times when you want to throw the key in a prominent place, because it will come in handy anyway, especially since you don't have any bags with you. But you can't do that, besides, finding a suitable organizer or case for tools is easy.

The editors of the site "bestx.htgetrid.com/en/" have prepared for you a rating of the best tool boxes for 2020.

Description and advantages of special storage devices

Even if a person is not constantly engaged in repairs, and he has about 15 tools, it is still necessary to buy a special box for storing working materials. After all, this will simplify monotonous tasks, and the user will always know where a particular device is.

Craftsmen are a little less lucky in this regard, since they cannot manage with one box, they need a couple of organizers, cases, trays and bags. Only then will they be sure that everything is in place. However, most of the question is not asked about the acquisition of this device, but about its advantages and practical benefits. Indeed, in some cases, the cost of boxes can reach 4-5 thousand rubles, and buying such a model may not be profitable if there are no strong positive sides. Therefore, it is important to make out the merits of buying a toolbox:

• Order and organization. In the cases, everything will always be in place, if you need a 10/12 key, it is the third from the bottom, the screwdriver is on the side, and the hammer is in the middle. The master will not even need to look in to know where which instrument is. It is enough to accurately name the location and the assistant will immediately reach out with the necessary device. This will save time and effort.
• Compactness. If everything is thrown into one pile, then there will be no convenience, and the person will begin to spend a few seconds looking for the necessary equipment. And it is not so convenient to carry such a box. Therefore, most manufacturers produce models that can easily fit specific instruments. This solution allows you to increase the area of ​​usable space.
• Easy moving. The last advantage of the cases is easy transportation. If professionals who work in their own office do not benefit from this dignity, for field craftsmen this is one of the main points. After all, when the departure is carried out, it is impossible to know exactly what tools will be needed, therefore it is necessary to have a set with universal devices.But these are rarely where they are sold, so a person will have to fill the box on his own, and this is also an advantage, since he will know exactly what is inside and what is not.

Key features of boxes

Most people buy a case without thinking about its features. They see that the product suits them, and then they purchase it. This approach is good, but it is imperative to know the main distinguishing features and characteristics of the box. After all, this will allow you not to buy a fake, from which the handles will come off or the retainer will break.

The first thing to decide on is the size. After all, there is no single model, each manufacturer produces a device that differs in size and capacity. Some have special sections for small nails or screws, while others have a section for bits instead. All this should be taken into account when buying, so as not to buy a product where only 3-4 out of 6 compartments will be used.

It should also be understood that the boxes are sold in two versions - professional and for home use.

Home models

There is nothing difficult when choosing here, since any compact device will do. The main thing is to look at the number of sections and the quality of the material. Remember the maximum loads that the device can withstand. Given all this, it will become easier for a person to look for a suitable option.

Professional box

Here, the difference from the previous one starts with dimensions. In addition, craftsmen prefer to use several models at once, since they may have too many tools to be limited to one box. Professional products can hold up to 20 or more different tools, including a level, hammer, mallet, etc. It all depends on the specifics of the work being done.

We must not forget that professional models are designed for frequent use, their cost can reach several thousand rubles. At the same time, the cases must withstand a certain load and not break from an accidental fall and not deteriorate when in an industrial environment.

What are the types

There are several types of tool boxes in stores. Basically, they differ in purpose, capacity and material of manufacture. So some are suitable for storing large electrical appliances, the second for small parts, and still others for essential tools. In this case, the shape is different for each performance, therefore, the dimensions can be larger or smaller.

Boxes and containers

Standard containers that have a solid bottom and walls. The average depth of most devices is up to 20 cm. Of course, more spacious versions are sold, but they are more focused on professional use. Also, in some models, there are special compartments that will help to pack the tools into shelves. The cover can be hinged or removable, depending on the modification.

Transformers

This is a special type of drawer that has gained wide popularity due to its spaciousness and small size. When opened, it quietly turns into a convenient rack, from where it will be convenient for a person to take appliances. Everything will be laid out according to the order set by the master himself, and even with strong shaking, nothing will mix. It is much more convenient to transfer such a model than the previous version. Most manufacturers equip such products with reinforced handles that can withstand high loads.

Cases

Such models are convenient for storing electrical appliances or universal tools - pliers, screwdrivers, wrenches, ratchet, etc. The lower part most often has several dimensions, where it is convenient to fold small tools, and at the top there is a compartment for fasteners, such as screws, nails, etc.

Organizers

These models are best for storing small fittings that will build up during disassembly. The advantages of this option are that, due to the large number of compartments and the tight fit of the upper part, the products do not mix with each other.However, a person needs to look at the quality of fit on their own, since some manufacturers produce too "free" models. Therefore, when you move the organizer, the inner contents may mix with each other.

Large suitcases and bags

This option is preferred by field craftsmen, since models are sold with a capacity of up to 100 devices. Such a solution is most relevant if a person is constantly on the road from one city to another. But this is typical for large suitcases. In addition to them, there are bags - this is a more mobile option that allows you to put all the necessary tools inside and calmly move them to any point. The main feature of this solution is strength. The product is made of waterproof fabric. This has a positive effect on tool storage.

Preferred material

You can choose any material, however, it should be remembered that it is best to give preference to wear-resistant products, while their weight does not exceed one kilogram, but this item is taken into account based on the size.

Unlike large boxes, bags are made from nylon. The material has good strength characteristics and is able to withstand high loads with minimal consequences.

Some containers or organizers can be made of aluminum or metal-reinforced plastic. There are also models that are entirely made of steel or wood. However, buying them for the sake of a beautiful appearance is not worth it, as they are demanding to care for, which will create more problems. In addition, steel structures are heavy, which negatively affects transportation, and this is one of the main selection criteria.

Rating of standard boxes

STANLEY Expert Cantilever 1-94-738 45 × 20.8 × 20.8 cm

Quality but expensive design with an upward-opening lid to store a variety of hand tools. Made of durable metal that can withstand high loads. For greater convenience, there are 5 compartments.

The average price is 2,600 rubles.

Advantages:

Disadvantages:

DeWALT DS150 Tough System

A product designed to transport and store a large number of instruments. The body is made of durable materials that can withstand heavy loads and not break. The handles are made of durable plastic. Therefore, the chance of their breakage is minimal. The weight of the complete structure is 4 kg.

Sold at a price: from 4,700 rubles.

Advantages:

Disadvantages:

BOSCH Toolbox PRO 42.7 × 23.2 × 19.5 cm

Standard budget design suitable for home use. The box is completely universal, which will allow you to store all the tools that fit inside, but it is important to remember the order. Therefore, the sorting must be neat. Withstands loads up to 20 kg.

Sold at a price: from 1,200 rubles.

Advantages:

Disadvantages:

Top popular organizer boxes

JetTools JT1602318 34 × 32.5 × 14 cm

A quality model that is suitable for storing electrical appliances. Made entirely of plastic. For greater security, there are special locks that can easily withstand the effects of negative temperatures. The number of compartments is 12 pieces.

Average cost: 400 rubles.

Advantages:

Disadvantages:

Sibrtech 90805 43 × 23.5 × 25 cm 18 "

A good model from a domestic manufacturer that will help you store most of the tools and fasteners. For the manufacture, high-quality plastic was used, which is able to withstand a load of up to 50 kg, which is an excellent solution in the budget segment.

The average price is 1,000 rubles.

Advantages:

Disadvantages:

Stels 90713 56x28x23.5 cm 22 "

Popular model with removable tray. All the necessary devices for carrying out repair operations can be easily placed in the box. High-quality handles can withstand loads of up to 20 kilograms, which is suitable for storing most of the tools. The capacity is average, which is the standard for budget solutions.

Sold at a price of 1,020 rubles.

Advantages:

Disadvantages:

The best models of drawer trolleys

KETER Gear Cart (17200383) 56.4 × 46.5 × 48 cm 22 "

An expensive option that will allow you to move tools over a long distance without any problems, since there are wheels. Also, the product is equipped with a dustproof and waterproof seal, which will prevent the accumulation of dirt even in industrial environments. For convenience, there are several carrying handles, one of which is retractable.

The average cost is 8 420 rubles.

Advantages:

Disadvantages:

DeWALT Toughsystem DWST1-75668 54x46x62 cm

High quality trolley box, which is equipped with a metal lock, which increases safe operation. The purpose of the product is the storage of hand tools. The product is completely made of high quality plastic, which is impervious to dust and moisture.

Average price: 7 180 rubles.

Advantages:

Disadvantages:

ZUBR Professional (38133-24) 61.6 × 37.8 × 41.5 cm 24 "

A good domestic model with castors and a comfortable handle. Suitable for storing both standard devices and small parts. For increased security, there is a secure lock that cannot be opened without a key. The product is made of wear-resistant plastic that can withstand mechanical stress.

The average price is 6,050 rubles.

Advantages:

Disadvantages:

Rating of quality organizers

STANLEY 2/3 FMST1-75779 Fatmax 43.2 × 26.7 × 6.4 cm

Simple model with 14 compartments and a plastic retainer. The design is made with high quality and provides a snug fit. In addition, there is one feature that makes it possible to staple up to 9 organizers together, which is also an advantage.

The average price is 1,560 rubles.

Advantages:

Disadvantages:

BLOCKER BR3728 38x31x6.5 cm

A good product to keep up to 18 different connecting tools intact. The design is a special case with a lid with plastic clips. There is a carrying handle.

The average cost is 415 rubles.

Advantages:

Disadvantages:

Hammer Flex 235-017 51 × 32.5 × 6 cm

A beautiful organizer that stands out for its value for money. In addition, the product allows you to store up to 22 different fasteners, while all partitions are removable. This solution makes it possible to increase the space to fit large items.

The average price is 620 rubles.

Advantages:

Disadvantages:

Top 3 trays for hardware

BLOCKER BR3753 24.5x17x12.5 cm

A quality set for storing hardware. The set contains 6 pieces, which will simplify operation. There are also three comfortable straps for added convenience. It is sold in two colors - orange and gray.

The average price is 545 rubles.

Advantages:

Disadvantages:

Stels 90801 24.5x17x12.5 cm

An inexpensive product that will allow you to pack all available fasteners. Made of hard plastic that can withstand high loads. The dimensions of the device are standard, but the cost is 160 rubles.

Advantages:

Disadvantages:

Alternative М450 25x16x13 cm

The cheapest model with good capacity and quality. The product is sold at an affordable price. Therefore, everyone can buy it.

The average cost is 60 rubles.

Advantages:

Disadvantages:

Finally

Order should be everywhere, because thanks to it, it will become easier for a person to navigate when looking for a suitable tool. If you have experience using the toolboxes described in the rating, or more interesting options, tell us about it in the comments.