The organization of correct sound insulation is impossible without the use of vibro-suspensions. The element reduces the effect of structure-borne noise, the propagation of vibration along the metal frame and creates a pleasant atmosphere in the apartment. Mounts to a wall or ceiling; 15 sq.m. 40-50 pieces are required, this will increase efficiency and improve performance. To help you choose a fastener, the editorial staff of the site "bestx.htgetrid.com/en/" has prepared for you a rating of the best vibration isolation suspensions and fasteners for 2020.
Content
Purpose of vibro suspensions
The main task of vibration isolation fasteners is to provide the user with the best vibroacoustic performance. Absorption should reach a maximum, while transmission to the metal frame or its individual parts is unacceptable.
Each element consists of 3 elements that do not change:
- Direct suspension - fixed to the profiles of the facing wall;
- Fasteners - the element is attached to the suspension at the overlap;
- The main design feature is gaskets made of rubber or polyurethane. Thanks to them, the product differs from standard fixtures, as they absorb all vibration that is transmitted along the walls.
Some manufacturers use connecting parts instead of the usual elastic base, which are covered with an anodized layer. The cost of such models is higher, but the strength indicators are also at a high level, which allows the product to be used in various premises, including the production area. The maximum weight that they can withstand reaches 30 kg, but some stores sell products designed to work with a greater load.
To ensure that the performance of the gimbal does not disappoint the user, it is important to correctly calculate their number. To do this, first determine the total area of the room. Products are purchased only on the basis of the results obtained. Carrying out installation work in a room of 20 square meters, a person will need 60-70 hangers, in some cases this value is higher, for example, when arranging a ceiling.
Despite the simplicity of the design, it is almost impossible to create vibration isolation fasteners with your own hands, since this requires certain technical knowledge. Even if a person can complete this project, then the effectiveness and durability of such products will be inferior to store options. It is better to save your strength and nerves, especially since the cost of such products is at an affordable level.
Where to start installation work?
The creation of additional sound insulation is a complex and lengthy process. First, the calculation of the ceiling structure is carried out, then markings are applied, holes are drilled and parts are mounted. Only 4 steps, but the process will take a day or two.
Ceiling design calculation
An important theoretical stage, the most time is devoted to it, since the effectiveness of the material used depends on the accuracy of the result. In order to avoid mistakes, it is important to be aware of the hidden nuances that can be encountered during the design process.
It is recommended to create a floor plan on graph paper, it is easy to find it on the Internet and print it on an A4 sheet. The main profiles are placed across the room, and should be placed at their shortest length. We must not forget about the correct observance of the step of the profiles. There are dozens of video tutorials on correct design on the Internet, but if calculations are not presented there and a specialist does everything by eye, then it is better to refuse such training.
It is important to consider such points:
- Each product is capable of withstanding a certain load. It is impossible to exceed this value, it is also not recommended to do it with a margin, since in this case the user will face the problem of underloading. The amount is selected that is best suited for the room, otherwise there will be poor vibration isolation.
- It is important to understand that with an increase in the number of unnecessary attachment points, the transmitted noise increases, which will reduce sound insulation to a minimum, and in some cases even worsen it altogether.
Correct calculations
To obtain correct results, it is necessary to change the distance of the main profiles, only in this way a person will be able to achieve the required load per unit of the fastener. For 1 square meter, about 2-3 pieces of vibration suspension should be obtained.
At the end of the creation of the finished drawing, you need to check it again. It is recommended to pay attention to:
- The maximum distance from the wall to the first and last fastening element is 15 cm;
- The distance is calculated to the axis;
- The rest of the elements are placed with the recommended spacing;
- When mounted on load-bearing profiles, the situation is simplified, the first step is 50 cm, then a distance of 10 cm is observed.
If a person has difficulties in carrying out an independent calculation, it is better to contact a specialist who will show the correct option.
Will the usable space be lost?
The maximum loss of height will be about 9 cm. This is a normal result, given that the vibration isolation properties will increase significantly, and the person will no longer experience discomfort from excessive noise and vibration, which is important.
Rating of the best vibration mounts and fasteners
MaxForte VibroStop PRO
The model is able to eliminate impact noise that enters rooms through ceilings and walls. The company's vibration-insulating suspension will help not only reduce the load on the metal profile, but provide the user with additional sound insulation, about 21 dB. Noise from an unplanned party of neighbors or renovation work will not affect the owner of the apartment and will allow you to enjoy the rest after working days.
The main element, which eliminates all vibrations, is made of Austrian elastic polyurethane. A distinctive feature of this product is a service life of 40-50 years and a high class of retention of mechanical loads.
It is fastened in a standard way, which will save time and increase the speed of work. The manufacturer guarantees the reliability of the structure for the entire period of operation. The vibrating suspension is designed for installation in plasterboard structures, as well as in metal frames, where plywood is used as a facing material.
The average price per unit is 380 rubles, for arranging a room of 18 m2 60 pieces will be needed, in this case the cost will be 22,800 rubles.
Advantages:
- European quality;
- Additional soundproofing;
- Service life up to 50 years;
- The resonant frequency of the mounts is 14 Hz;
- Anti-vibration polyurethane layer.
Disadvantages:
- High price.
SoundGuard Vibro M
A popular brand product that guarantees ease of installation and durability. The product is designed to save space, thus increasing the usable area. This solution is suitable for old apartments or houses with a small room height. The SoundGuard Vibro M is designed for use with KNAUF Profile Systems.
The fasteners are sold in two elastomer colors - green and brown, while the performance remains the same.The maximum load that a product unit can withstand is 12-15 kg. The recommended consumption is 3 suspensions per square meter.
The body is made of galvanized steel, the vibration isolation layer is made of elastomer. Can be used for both ceiling and wall mounting. Metal thickness - 1 mm. The weight of the finished product is 110 grams.
The average price is 220 rubles, for 60 pieces a person will give 13 200 rubles.
Advantages:
- The optimum ratio of price and quality;
- Durable material body;
- Effective vibration damping;
- Withstands loads up to 15 kg;
- Service life over 30 years.
Disadvantages:
- High consumption as 3 pieces are required. 1 m2.
Vibration suspension of the Power of Silence company
An element of domestic production, which has a low price. At the same time, the sound insulation properties are maintained at a high level. The maximum load is 40 kg, which saves on the number of products. The mount is completely universal and is suitable for both wall cladding and suspended structures.
The body is made of galvanized steel. For the production of vibrating layer, rubber was used, which withstands strong vibrations and guarantees the user additional sound insulation. Even an inexperienced user can handle the installation of the structure, the main thing is to follow the instructions that can be found on the Internet.
Sold at 95 rubles per unit.
Advantages:
- Low price;
- Withstands loads up to 40 kg;
- Does not require special skills for installation;
- Robust frame;
- Enhances acoustic performance.
Disadvantages:
- Not found.
Sonokrep EP Sylomer 30
Direct suspension is used in all soundproofing systems. Removes vibration that is transmitted along the walls and prevents the penetration of extraneous sounds into the apartment. According to the research results, which were carried out in an independent Italian laboratory, the vibration suspension is able to increase the acoustic characteristics in the frequency range: from 125 Hz to 1 kHz by 5 dB.
The frame is made of durable steel, which makes it possible to withstand loads of up to 30 kg. Ceiling mountable only. The vibration-insulating layer contains polyurethane, this is a modern solution capable of increasing the acoustic characteristics and damping vibrations that negatively affect the walls and interfere with a comfortable pastime. In addition, the absence of deformations is a positive point.
The average cost is 370 rubles per piece.
Advantages:
- Easy installation;
- Isolation efficiency and vibration damping;
- Suitable for all ceiling coverings;
- Profile thickness adjustment;
- Good performance even at low temperatures;
- Due to its small size, it slightly reduces the thickness of the ceiling;
- Increases acoustic performance;
- Service life 50 years;
- Does not emit toxic substances and does not cause allergic reactions.
Disadvantages:
- High price.
VibroFix SPU
Reliable ceiling suspension, based on 1.5 mm thick galvanized steel. This increases the maximum load and reduces the consumption of fasteners. The elastic element used in the suspension is produced by the European company Getzner. The product is designed to provide proper vibration protection for buildings or specific rooms.
Due to the strong material from which the frame is made, the load limit is 25 kg. The minimum resonant frequency is 12 Hz. Due to its small size, after installation, the user will lose a minimum of useful space. In order to increase the sound insulation, it is recommended to fill the metal ceiling structure with acoustic mineral wool.
The product is suitable not only for installation in residential buildings, it is also used for:
- Sound recording studios;
- Meeting rooms;
- Ventilation chambers;
- Industrial premises;
- In the halls of the cinema.
Sold at a price of 380 rubles.
Advantages:
- Efficiency;
- Wide range of applications;
- Small loss of usable space;
- Ease of installation;
- The minimum resonant frequency is 12 Hz.
Disadvantages:
- Price.
PhoneStar Wolf Universal
A budget model that is used to organize the correct sound insulation of metal frame structures. Suitable for fixing to cladding walls and ceilings. It functions in the temperature range -20 ... + 40 degrees. After installation, not a single structural, let alone impact, noise will penetrate into the room.
The body is made of galvanized steel, 1 mm thick. A special block made of elastic compound is used to dampen vibrations. This decision made it possible to reduce the cost of the product without losing quality. The maximum load per hanger is 40 kg. The recommended step for walls is 3 units per meter, for a ceiling this value is 4 pcs.
The average price is 200 rubles.
Advantages:
- Easy installation;
- Wolf dowel compatible;
- High-quality vibration damping;
- Thickness adjustment;
- Service life from 25 years;
- Environmental friendliness.
Disadvantages:
- Not found.
Vibroflex-K15
An expensive option that is suitable for installation in simple ceiling systems. It guarantees the user the damping of any vibration and increases the acoustic performance at times, making the person well heard, even if he speaks in a whisper. The production is carried out by a popular company that cooperates with good suppliers and has several warehouses, which allows us to organize fast delivery throughout the territory of the Russian Federation.
The frame of the fastener is made of galvanized steel, 1.5 mm thick. The maximum load on one suspension is 15 kg. Vibration isolation layer - polyurethane, which increases service life and efficiency. Material consumption - 2.8 pcs. per square meter. Installation is carried out using a wedge anchor, before installation it is necessary to drill a hole with a diameter of 6 mm.
Sold at a price of 460 rubles.
Advantages:
- Durability;
- High-quality vibration damping;
- Frame thickness - 1.5 mm;
- Low consumption.
Disadvantages:
- High price.
VibroLine C
A product with a direct suspension, capable of strengthening the vibration ties of the frame. For wall mounting only. The maximum load per element is 25 kg, which is the optimal solution and is suitable for every room. Before entering store shelves and warehouses, the goods were tested at NIIBTMET. The test report is freely available.
The casing consists of galvanized steel, which does not deform over time and retains its positive characteristics over a long period. The polyurethane vibration layer dampens most of the vibrations and increases acoustic performance.
Sold at a price of 310 rubles.
Advantages:
- Minimizing the thickness of fasteners;
- Compatible with various profile structures;
- Long service life;
- Tested by an independent laboratory;
- Protects against low frequency noise.
Disadvantages:
- Price.
Welldone protector
An inexpensive product designed for use in wall and ceiling structures. Prevents the propagation of sound waves and vibrations along the erected frame. Suitable for use in a residential apartment building, as well as in studios and cinemas.
The frame is made of galvanized steel. Aviation rubber acts as a vibration-insulating material, which made it possible to reduce the cost of the product, but maintain technical indicators at an acceptable level. For walls, the recommended consumption is 2.5 pcs. per sq. m., at the ceiling this indicator is 3.5 pcs. on m2.
Sold at a price of 120 rubles.
Advantages:
- Service life - 20-30 years;
- Does not deform over time;
- Affordable cost;
- Efficiency.
Disadvantages:
- Not found.
Finally
Vibration suspensions will provide the owner of an apartment or studio with reliable vibration protection and guarantee additional sound insulation. Not a single blow or noise that arises from above will disturb the owner. If you have experience using the models described in the rating, or more interesting representatives, tell us about it in the comments.
