The amplifier is responsible for ensuring high-quality and stable reception of the mobile network signal. The modern market provides a wide selection of various repeaters. The editors of the site "bestx.htgetrid.com/en/" have prepared for you an overview of the best amplifiers for cellular communication and the Internet.
Content
Where to start choosing a repeater?
The choice of an amplifier directly depends on the goals and needs of the user, therefore the first step before purchasing such a useful and necessary device is to determine the standard of cellular services that the consumer prefers to use. Some users want to improve the communication quality. When choosing a device, they need to pay attention to a GSM amplifier. To increase the speed of mobile Internet, you need to purchase a 3G antenna or a 3G repeater. If you need to strengthen the mobile signal and increase the Internet speed, you can give preference to a 2-band GSM / 3G cellular amplifier.
The second step is to check the current cellular signal strength. This can be done using multiple mobile phones, as the sensitivity of mobile antennas can vary significantly. When the scale of signal reception inside the dwelling does not exceed a pair of divisions, then the gain of the device must be at least 65 dB. For a more complete test, you need to go outside and check the signal strength there. A pair of divisions will indicate the need to purchase an amplifier with a coefficient of at least 80 dB. It makes no sense to purchase equipment with a gain of less than 65 dB because of the low result.
The area of the room is also an important aspect. The larger the room, the higher the repeater output power will be required by the user. If the coverage area is less than 200 sq. m, then a standard 100 mW repeater is quite suitable. When it is equal to 600 or 800 sq. m, then you need a 300 mW device.
Considering these aspects, there should be no problems with the choice of a mobile amplifier. But choosing the right repeater is only part of the job of strengthening mobile communications. An equally important factor is the correct installation of this device.
Booster 3G / 4G
The most popular recently for amplifying the signal of cellular communication is 3G and 4G equipment, which can be divided into the following types:
- Indoor signal repeater for USB modem;
- A common mobile signal booster;
- USB modem or router equipped with an external antenna;
- Outdoor 3G / 4G antenna with built-in modem or router.
Repeater room view
Such amplifiers are a thin piece of foil, which is packed in low quality plastic. The antenna can give practically no gain. The cost of this type of equipment is about 1,500 rubles. The amplification effect is achieved by moving the modem closer to the window, where the signal level may be slightly higher. The beautiful packaging of this equipment is considered the main advantage for which the user pays a rather significant amount.In addition, the user needs to purchase an additional USB modem / router and a separate SIM card, thanks to which access to the Internet will be organized. The inefficiency of using such a device has long been proven by many users.
Conventional mobile signal booster
In this case, an external antenna is mounted outside the room to receive a signal from mobile operators. It connects with a cable to an amplifier inside the building. This type of amplification allows you to provide a large area with mobile communications or the Internet. The gain directly depends on the repeater model. It can be between 60 and 90 dB. This type of reinforcement can be used not only in the country, but also in multi-storey buildings. Repeaters of this kind can be single-band or multi-band. They are distinguished by high efficiency, reliability, and no requirement to purchase additional SIM cards. In addition, there is the possibility of scaling the system. After purchasing and installing such a repeater, smartphones reduce battery consumption. The only drawback of such an amplifier will be the need to remove the external antenna at a distance from the internal one. The cost of such an amplification system is up to 14,000 rubles.
USB modem / router equipped with an external antenna
This equipment can be assembled with your own hands or you can purchase a ready-made box solution. An outdoor antenna is connected to an existing USB modem inserted into a PC or connected to a Wi-Fi router using a cable. The most budget models of this kind of amplifier are characterized by low efficiency, so savings on this equipment will be inappropriate. If you choose the right amplifier, you can get a slight increase in mobile communications or the Internet up to 15 dB. There are few disadvantages of such a repeater, but they are still there. These include weak gain, low reliability, the need to purchase a SIM card for the Internet.
Outdoor 3G / 4G antenna with built-in modem and router
This repeater version is considered the most expensive. A hybrid outdoor antenna with built-in Wi-Fi router and USB modem is installed outside the house. A PoE adapter installed inside the house can significantly enhance the cellular signal. The cost of this equipment can be up to 20,000 rubles. With high gain and a properly defined operating frequency, a hybrid antenna will provide a stable and stable signal. Such an antenna is rather difficult to maintain, because most of these devices are assembled by handicraft in Russia or China.
Rating of amplifiers of a signal of cellular communication and the Internet
To choose the right model for your home or plot, you need to dwell in more detail on the most popular and well-proven devices. Feedback from our compatriots will be of invaluable assistance in choosing such equipment.
TITAN-900
This equipment is able to strengthen the signal of mobile communication and increase the Internet coverage of a country house or a medium-sized cottage. The set comes with a high quality repeater and 2 powerful antennas. The developers have provided for automatic adjustment of the signal settings, so even a beginner can cope with connecting this equipment. The repeater supports an unlimited number of subscribers, which in most cases is quite a weighty argument when choosing an amplifier. If the distance between the antennas is too small, the indicator on the device will notify the user about this. The operating frequency for the equipment is GSM-900, UMTS. The equipment is designed to cover an area of up to 500 sq. m. Coverage standards supported by this device: 2G, 3G, 4G, Wi-Fi 4. The amplifier has a shielding and power indicator. The innovative electronic circuitry ensures high quality processing of the incoming signal. The maximum signal gain is 65 dB. Dimensions are 17x10x3 cm, and weight - 0.73 kg. The cost of the TITAN-900 repeater is 7,250 rubles.
Advantages:
- Large coverage area;
- Free round-the-clock technical support;
- Power;
- Overload protection;
- Component quality;
- Affordable cost;
- Automatic adjustment;
- Silence;
- Unlimited number of subscribers;
- Reliable, stable performance;
- Stylish design;
- Compactness;
- There is natural cooling.
Disadvantages:
- There is no LCD display;
- Manual adjustment is not provided;
- Short cable included.
VEGATEL VT-900E-KIT
One of the most effective solutions for increasing the signal level of mobile communications and the Internet is a kit offered by a brand manufacturer. It includes:
- Repeater;
- Antennas, internal and external;
- Cable;
- Power Supply;
- Fasteners.
On the body of this amplifier there is an indicator informing about the state of the device when shielding antennas, the presence of a signal or an overload. You can set up signal reception automatically or manually. The latest electronic system provides high quality signal processing. The area of action is 350 sq. m. The maximum gain of the internal antenna is 72 dB, and the external one is 12 dB. The repeater has a maximum signal amplification factor of 60 dB. The dimensions of the device are 15.5x10.6x3 cm, and the weight is 0.5 kg. The cost of the VEGATEL VT-900E-KIT amplifier is 12,450 rubles.
Advantages:
- Stability of work;
- Stylish design;
- Nice welcome;
- Overload protection auto shutdown;
- Manual and automatic gain control;
- Large coverage area;
- Build quality;
- There are no restrictions on the number of subscribers.
Disadvantages:
- High price.
Everstream ES1800P
The domestic manufacturer supplies the home appliance market with a device that is distinguished by high-quality assembly, reliability and durability. It functions correctly on GSM and LTE frequencies. Coverage is carried out up to a distance of 300 sq. m. The working area of the frequency mode is 75 MHz. The equipment can be used in basements, remote construction sites, country cottages and districts located at a considerable distance. An informative LCD display allows you to get complete information about the status of the device. The gain (KU) is 65 dB. The dimensions of the device are 23x13x3.4 cm, and the weight is 1.2 kg. The power consumption of the device is 12 V. The cost of the Everstream ES1800P repeater is 14,100 rubles.
Advantages:
- Continuity of work;
- LCD screen;
- Reliability;
- Ease of installation;
- Possibility of manual power adjustment;
- Ergonomic modern design;
- Suppression function;
- Increased gain level;
- There is a removable bracket;
- Domestic brand.
Disadvantages:
- Overpriced.
PicoCell 1800 SXL
This device of a domestic manufacturer has a significant weight. Its appearance does not have any special delights, which seems unattractive to some users. The equipment is based on the idea of practicality and functionality. On the front panel of the device there is a black and white LCD screen informing about the signal reception status of operators Megafon, Tele2, MTS or Beeline. Due to its large coverage, the appliance is often installed in offices, medium-sized basements, basements, shops or bars. KU is 80 dB, and the dimensions are 25x15x5.5 cm with a weight of 1.7 kg. Coverage area - 3,000 sq. m. The cost of the PicoCell 1800 SXL repeater is 30,000 rubles.
Advantages:
- Power;
- Reliability;
- Build quality;
- Continuity;
- Ergonomics;
- Power adjustment is carried out automatically;
- Built-in protection system;
- Reduction of microwave radiation by reducing the power of mobile phones;
- Overload indication of amplifying stages;
- Reducing the likelihood of communication interruptions or signal dropouts in buildings with threshold coverage levels.
Disadvantages:
- Not all users are happy with the hardware design;
- High price;
- Not all weather;
- Can only be installed in heated rooms.
iTone GSM-10B
This compact equipment is a monoblock in a metal case, the frontal area of which is stylized as a smartphone. It is intended for use in small areas such as apartments, summer cottages, offices or rooms. The kit includes an external and internal antenna, power supply, repeater, cable, holder and bracket. The KU is 50 dB, and the dimensions are 12x40x10 cm with a weight of 0.15 kg. At the same time, the noise figure does not exceed 6 dB. The cost of the iTone GSM-10B repeater is 5 800 rubles.
Advantages:
- Compactness;
- Ease of installation;
- Manual power control;
- Modern design;
- Acceptable cost;
- The number of simultaneously connected subscribers is not limited;
- Component quality;
- Domestic manufacturer.
Disadvantages:
- There is no automatic adjustment of the KU.
KROKS RK900 / 2100-50
The manufacturer of such equipment is a domestic research and production company. The device, aged in gray metallic tones, with a shock-resistant plastic housing, is designed to cover cars, small offices, apartments, or other rooms that do not differ in large size. The coverage area does not exceed 100 sq. m. KU is 50 dB, and dimensions - 16x15x3.7 cm with a weight of 0.53 kg. The cost of the KROKS RK900 / 2100-50 amplifier is 7,900 rubles.
Advantages:
- Practically silent work;
- Build quality;
- Easy to install and configure;
- Availability of LED indication;
- Reliability;
- Ergonomics;
- Stylish design;
- Low power consumption;
- Duplex communication;
- Domestic manufacturer;
- Compactness;
- The indication allows diagnosing the presence of a loopback and overload.
Disadvantages:
- Sometimes there are device malfunctions;
- There is no power gain control system.
Baltic Signal BS-GSM-75
The equipment is a dual-band apparatus with a durable metal body. The device does not come with external and internal antennas, so the user needs to take care of purchasing them himself. The equipment is configured based on the data on the screen located on the top panel of the device. Thanks to the metal casing, overheating of the board or mechanical damage to the device is excluded. The large coverage radius makes the repeater useful wherever there is no good signal. KU is 75 dB, and the coverage area is 800 sq. m. Its dimensions are 24x11x3 cm, and its weight is 0.8 kg. The cost of the Baltic Signal BS-GSM-75 device is 15,000 rubles.
Advantages:
- Overheat protection;
- Manual power setting function;
- Efficiency;
- Compactness;
- Stylish design;
- Ergonomics;
- Power;
- Build quality;
- Domestic manufacturer.
Disadvantages:
- You have to purchase antennas yourself;
- High price.
We have considered the most popular and popular repeaters among compatriots. If you have experience using the cellular and Internet signal amplifiers listed in the rating, or more interesting models, share your opinion in the comments.