Best corner baths for 2020

Often, a corner bath becomes not only an original design solution, but also a banal necessity due to the small size of the bathroom. And given that the bath is purchased for more than one year, it is especially important to know which model is better to choose and what to look for when buying. The editors of the site “bestx.htgetrid.com/en/” have prepared for you an overview of the best models of corner baths for 2020.

Types of corner baths

Today manufacturers offer a large selection of corner baths. The model is easy to choose for any interior and budget. And if we consider the topic globally, then we can conditionally divide all products according to two parameters: material and form.

By material

On the modern plumbing market, there are models made of acrylic, cast iron, steel and plastic. Each of the materials has its own pros and cons. Well, which one to choose is up to the buyer, of course.

• Cast iron is a long-established material. Strong, durable, effectively absorbs noise and at the same time keeps the warmth of hot water perfectly. However, this material has disadvantages. The structure of cast iron does not allow creating complex shapes, therefore, manufacturers do not provide a variety of cast iron baths. Also, the enamel covering the product must be of high quality, otherwise it will quickly wear off and the bath will lose its attractive appearance.
  Cast iron is heavy, which means the product will be stable when properly installed. But at the same time, a lot of weight will play a negative role when lifting the product to the floor. But such a bath will last at least 25 years.
  The manufacture of sanitary ware from cast iron requires serious production capacity, which inevitably leads to a high cost of the finished product. In addition, many technical points are simply impossible, for example, due to the high electrical conductivity of the material, it is impossible to install hydromassage nozzles in such baths.
• Steel - as a rule, structural steel is used. Due to its lightness and plasticity, manufacturers can make bathtubs of various shapes, while they will be much lighter than their cast iron counterparts and stronger than acrylic models. However, when buying, it is worth considering the expected load, in order to avoid deformation of thin walls. The steel bath will last about 15 years. The cheapness of the material makes it possible to produce inexpensive models. But, despite the relatively low prices, steel models are not very popular.
  A great advantage of steel corner baths is the ability to install additional accessories, such as hydromassage nozzles, handles, headrests, filters, and more.
  It is also worth considering the moment that with insufficient wall thickness, the bottom of the bath can bend. Therefore, during installation, additional reinforcement of the space between the floor and the product will be required.
• Acrylic is an environmentally friendly material. Such baths are very diverse in shape and size. This material allows you to embody even the most daring design decisions. In addition, the products are lightweight and durable.
  Acrylic retains heat well, so the water will not cool quickly.An acrylic bathtub requires gentle care. Do not clean the surface with abrasive cleaners or steel wool. Also, you should not allow blows inside the product and on the sides. If you accidentally drop a heavy object on the surface, you may encounter cracks and chips, and then the product will have to be restored.
  A significant plus is that the color of the future product is given at the production stage. This fact guarantees the preservation of the original appearance for the entire period of operation.
  If used correctly, the product will last at least 15 years.
• Plastic. Plastic products are justified only by the price. Very cheap models can be found on the plumbing market. However, their benefits end there. Such baths lose their appearance over time, they can turn yellow, get scratched. In addition, the material is very flexible, the walls and bottom bend under load.
  The shelf life of such products is short, about 5 years.

By form

One of the common misconceptions is the opinion that a corner bathtub necessarily has two equal sides making up a corner and a rounded third wall. In reality, in addition to the symmetrical triangular shape, the product can also be:

• in the form of a trapezoid;
• asymmetric polyhedron;
• with one rounded or beveled side.

Symmetrical or asymmetrical shapes are used regardless of the size of the bathroom. However, for small areas, it is better to choose a triangular bathtub, so the space will be used more practical.

Product advantages and disadvantages

Corner baths are firmly entrenched in the plumbing market and are used as often as classic products. However, like any other product, they have a number of advantages and disadvantages.

Advantages:

Disadvantages:

What to look for when choosing a product

Going to the store for a new corner bathroom, it is important to prepare and know what to focus on when choosing.

• Dimensions. Depending on the area of ​​the bathroom and on the planned number of people who will take a bath at the same time, it is important to decide in advance which option is needed, single or double. The length of the double bath reaches 2 meters, and the depth of the bowl is from 40 to 70 cm.
• The form. Also selected depending on the area of ​​the room. Asymmetric is easier to fit into a small room.
• Wall thickness. This applies to acrylic models. Thin walls will bend under heavy load, so they will have to be reinforced with a metal frame during installation.
• Additional accessories. It is important to decide whether you need handles on the walls, a headrest or hydromassage nozzles. Whether the included mixer will fit or will it be purchased separately. All these additional elements can be completed with the bathroom, but then the price will increase significantly.
• Material. The cast iron model is durable but very heavy. Plastic - cheap, but quickly loses its appearance. Steel is noisy. Acrylic - lightweight, a wide range of shapes, but the walls should be thick.
• Right angle location. Be sure to consider the right- or left-sided bowl needed for installation in a particular bathroom. It also matters where the drain is located.

TOP 7 best corner baths for 2020

Marka PICCOLO 150 × 75 without hydromassage acrylic corner

The asymmetric acrylic corner bathtub 1Marka PICCOLO is a practical compact option for those who equip a cozy but small bathroom. Depending on the intended location, the manufacturer manufactures this model in two versions: left-hand and right-hand installation.

The bowl is compact and its length is only 1.5 meters, for not tall people this is quite enough to soak up the fragrant foam and relax after a hard day. But high users will be cramped in it. But at the same time, the bath will help save space. But here everyone sets his own priorities.

The acrylic body is as strong and durable as its cast iron counterparts. With proper installation and careful maintenance, the 1Marka PICCOLO model will serve for more than a dozen years.

Average cost: 15 900 rubles.
Country of origin: Russia.

Advantages:

Disadvantages:

Marka One LINEA 165 × 85 acrylic corner

The non-standard shape of the Marka One LINEA model will fit into any bathroom decor. The reclining backrest will provide a comfortable stay in the bath during water procedures. And the drain hole is located so that the water drains quickly and does not stagnate.

A product made of 100% acrylic has high strength, but at the same time it is much lighter than its cast iron counterparts. The walls are thin, only 4.5 mm, but due to installation on a metal frame, the bathtub becomes rigid and can withstand a load of up to 1000 kg. Perfectly flat surface without pores is easy and quick to clean, and does not allow the accumulation of bacteria and fungi.

Correct installation and correct use guarantee a long service life - over 20 years.

Average cost: 20 250 rubles.
Country of origin: Russia.

Advantages:

Disadvantages:

MARKA ONE Gracia 150 × 94 without hydromassage acrylic corner

The graceful and unusual shape captures the attention of buyers at first sight. Deep bath bowl with a volume of 150 liters. In addition, the headboard has a recess that serves as a seat and a shelf-table. You can use it for its intended purpose, as well as put bath accessories, a bowl of fruit or, for example, a glass of wine.

The left-hand design is compact and does not take up extra space during installation. Even a small bathroom will look very organic.

The MARKA ONE Gracia is offered without accessories. However, the manufacturer reserves the opportunity, if necessary, to install side handles, headrest, hydromassage nozzles. All of these items are not included and must be purchased separately.

Average cost: 18 550 rubles.
Country of origin: Russia.

Advantages:

Disadvantages:

AQUATEK Diva 170 × 90 right acrylic corner

The neat drop shape fits gently into small bathrooms. Due to smooth lines, the dimensions are visually reduced. Externally, the bathtub attracts with its simplicity and sophistication.

Absolutely safe 100% acrylic sheet Altuglas was used for manufacturing, which provides an affordable cost and does not reduce the quality of products.

Installation is very simple and time consuming. The bath is unpretentious in care - it is easy to clean and retains its original whiteness.

Average cost: 11,150 rubles.
Country of origin: Russia.

Advantages:

Disadvantages:

Santek Cannes 150x150 without hydromassage acrylic corner

The Santek Cannes model is simple yet functional. It does not take up much space, so it is perfect for bathrooms with small areas. The bowl is deep and spacious. For convenience, there is a built-in seat.

Of the minuses, it can be noted that it is not possible to install additional elements, such as handles or hydromassage nozzles. However, the cost of the product makes this option very economical. The bathtub is well suited, for example, for installation in a country house or in a small apartment, where there is absolutely no extra space.

With such an attractive price, the quality of the product does not suffer. Acrylic has established itself as a durable and reliable material. Therefore, with proper installation and careful maintenance, the bathtub will last for more than a dozen years. And despite the fact that acrylic products do not have any coating, the bathtub will also retain its appearance for a long time.

Average cost: 13,100 rubles.
Country of origin: Russia.

Advantages:

Disadvantages:

Cersanit KALIOPE 153 acrylic corner

The Cersanit KALIOPE model has a beautiful and modern design. The manufacturer has provided many nuances for comfortable use. The built-in seat and non-slip bottom ensure safe use even by the elderly. There is also an integrated molded headrest. The bowl itself is deep and roomy. Therefore, nothing will prevent you from relaxing after a busy day.

The bathroom is easy to maintain. The surface is easy to clean and the original whiteness is preserved. Despite its volume, the bathtub looks compact and can be installed even in small bathrooms. The set includes a metal frame on which the product is installed, which provides additional stability and strength.

Average cost: 14,200 rubles.
Country of origin: Poland.

Advantages:

Disadvantages:

Triton PEARL-SHELL 160х104 acrylic

Stylish and modern model will delight all lovers of relaxing in the hot tub. The manufacturer has provided all the possible little things. The reclining backrest and integrated massage nozzles ensure maximum back relaxation. At the same time, the controls are located so that the adjustment is easy.

The bottom is made in such a way that there is a slight bevel towards the drain. Thanks to this, the water drains completely and does not stagnate. Moreover, if, for example, due to the curved floor, water still accumulates at the bottom of the bathtub, then this trouble can be corrected by twisting the adjustable legs.

Average cost: 17,510 rubles.
Country of origin: Russia.

Advantages:

Disadvantages:

Knowing all the necessary nuances that should be considered when choosing a corner bath, any buyer himself can easily cope with this task.

If you have experience using the models of corner baths participating in the rating, or you know a more successful model, share your opinion in the comments.