Best corner toilets for 2020

Unfortunately, not all residential buildings have enough space for installing classic bathrooms, so this problem often has to be solved by carefully considering the location and choosing compact models of plumbing fixtures. A win-win option in this case would be to buy a corner toilet - a profitable design for an original bathroom design.

The editors of the site "bestx.htgetrid.com/en/" offer you a rating of the best corner toilet bowls for 2020.

Special features and specifications

In general, the corner bathroom does not have any significant distinguishing features from the classic familiar model. The only difference is in the shape of the tank, the drain bowl of which is made in the shape of a triangle. But, despite this feature, this does not affect the total volume of water contained in it. The back of the toilet itself can be either a standard shape or a wedge-shaped one.

Manufacturing material

In most cases, standard materials such as plastic, porcelain and earthenware are used to make corner toilets.

Most of the plastic toilets are made of acrylic with fiberglass reinforcement and special resin. These models are quite light and simple, have a high level of strength and non-porous structure. This is the main advantage of plastic bathrooms. But at the same time, this kind of plumbing negatively tolerates temperature changes and strong mechanical influences.

Porcelain toilets are considered more durable, which significantly increases their service life. Corner toilets supplied with the cistern are made of white clay with the addition of quartz and feldspar, making the structure of the material less porous. At the final stage, the product is covered with a special glaze, providing it with a perfectly smooth surface and greatly simplifying its care. As for the disadvantages, such options have a higher cost.

Toilets made of earthenware can be classified as plumbing at an affordable price. Due to additional firing and glazing at the final stage of manufacturing, the porosity of the material is noticeably reduced, the service life is increased, and the care of such plumbing does not cause any problems.

Other materials (stone, steel, precious metals) can also be used to make corner toilet bowls. But most often they are used only in the manufacture of custom-made design products.

Bowl type

The peculiarity of the bowl has a significant impact on the usability of the toilet. Having purchased an unsuitable option, there is a possibility of problems such as increased water consumption, too loud volume or a lot of splashes. Therefore, the question of choosing a bowl is purely individual.

There are 3 main types of bowls:

• With a shelf.It is quite an acceptable option with a reduced volume of splashes when draining, but at the same time, it is not entirely convenient, since waste products remain in the deepening of the shelf. As a result, an unpleasant odor may appear, and it will be difficult to clean it, since in some cases you will have to use a brush to completely clean it from dirt. In addition, this form contributes to the formation of a water seal, due to which lime deposits, urinary stones and rust will begin to appear inside, and the water consumption in this case will be quite large.
• With a bias. In such products, the front or back wall of the bowl is at a certain slope, thereby almost completely blocking the appearance of an unpleasant odor, while the water consumption will be small.
• Funnel-shaped. Devices with this type of bowl are distinguished by a high degree of hygiene and economy in terms of using water, the complete absence of an unpleasant odor is guaranteed, however, when flushed, a lot of splashes can appear that can get on clothes and all surrounding objects.

There are also rimless bowls. In this case, the ring on the upper edge will be absent, which will provide more effective cleaning of the toilet and extend its operational life.

Branch type

The type of sewer outlet does not in any way affect the degree of comfort in using the bathroom, there are also no external distinctive features. But the location of the sewer hole and its parameters should still be taken into account when choosing a toilet.

There are 3 main types of bends:

1. Horizontal. Devices with such a branch are suitable if the location of the sewer pipe socket is at a height of 5-10 cm from the floor.
2. Vertical. The design of the bathroom has a downward drainage hole for maximum space saving. However, it should be understood that such an arrangement of the drain hole is found only in private houses, since apartment buildings have a slightly different structure of the sewage system.
3. Oblique release. Most of the manufactured models are equipped with this kind of outlet. The connection is made directly to a socket located at a short distance from the floor level or at an angle to it.

It is very important to choose the most suitable bend correctly, since it will not work to replace a model with a horizontal type of outlet with a vertical one. In this case, it will be necessary to change the position of the socket.

Additional functions

Corner toilet bowls can also be equipped with additional functionality. This greatly simplifies their use, providing the owner with more comfort and convenience. In this case, you can find the most unusual functions. For example, the presence of a sensor flush button and even a remote control. However, there are also more useful improvements.

Among the most common functions of corner devices are the following:

• microlift, contributes to the almost silent lowering of the lid with a slight click;
• drain mode, allows you to conveniently adjust the amount of discharged water for draining;
• the presence of lighting, acts as a decoration for the appearance of the product, making the interior even more beautiful;
• bidet, with this function, you can not install a separate hygiene device in the bathroom;
• heated seat, used in cold rooms or when there is a medical condition.

The cost of models with additional functionality can be quite high, as a result of which not everyone is able to afford such an acquisition. It should also be understood that most improvements are not an urgent need, so you can safely refuse them.

Advantages and disadvantages

Corner devices have a special place in today's market. They are preferred by many consumers, and the popularity of such products is growing steadily day by day.

The relevance of corner plumbing devices is explained by a huge number of positive qualities, among which the following can be distinguished:

• Take up a minimum of free space in the room. This allows you to create a more functional and ergonomic environment in the bathroom, while leaving enough space in it, and households will not experience discomfort.
• They allow you to create a visual correction of the appearance of the room. Plumbing fixtures installed in the corners are able to visually "round off" the situation, thereby freeing up its central area.
• If the house has a separate bathroom, then installing a corner bowl will allow you to place a suitable option for a bidet or corner sink here.
• At first, it may seem that the design of the corner model is rather fragile and vulnerable. However, according to experts, such products are able to withstand an impressive weight (up to half a ton) without any problems.
• Most corner units have an additional height adjustment function (within 4 cm).
• In the event of an unexpected breakdown or leakage of the toilet bowl drain, the risk of flooding the neighbors from below is reduced to almost zero, since the corner model has a special emergency drain system. Thus, the network liquid, even if it starts to overfill the bowl, will be immediately redirected to the overflow channel.
• Drain bowls of corner models of bathrooms have a fairly high level of strength. In most cases, they are made of solid materials, which completely eliminates the likelihood of cracks or other mechanical damage.
• The design of the corner toilet allows you to add a certain touch of originality and modernity to the room atmosphere.

However, despite all the visible advantages, corner toilets also have a number of disadvantages:

• Although they take up a minimum of free space, they cannot always be placed in a classic bathroom. In addition, the use of this kind of plumbing can cause some discomfort (there is a possibility that the owners' legs will rest against the wall).
• Since there are also hinged models of corner bathrooms, when installing such products, one should take into account the fact that not every wall is able to withstand the weight of both the toilet bowl itself and the full drain bowl, as well as the person sitting on it. If the material for making the base of the wall is drywall, it is best to refuse to purchase such a model.
• In some cases, when carrying out installation work on the installation of a corner toilet, slight difficulties may appear. First of all, this concerns the nuances of the sewer to the corner.

Criterias of choice

To choose a reliable and at the same time not too expensive model of a corner toilet, you need to know which parameters are given special attention. Because having all the necessary knowledge will allow you to make the perfect purchase, which will not later disappoint or cause a feeling of regret.

Here's what to consider when choosing:

1. Location. This kind of structure can be placed parallel to the wall surface with a slight offset of the drain tank to the side. Plumbing located diagonally relative to the corner of the bathroom is also popular. A drain bowl of this design is placed at an angle of 45 or 90 degrees. In some rooms, the installation of corner models seems impossible, since the location of the riser is along the wall. This design requires additional piping in the form of hoses and corrugations.
2. Connection method. For the successful installation of the toilet, you should make sure that it can be connected to communications. Cold water supply to the corner model can be carried out from the side and from below. In order not to have to make extra eyeliners, you should choose a model that fully corresponds to the communications already available in the house.
3. Design.If the bathroom has a certain style of decoration or it is made in a single color scheme, then the toilet must be chosen, taking into account all the requirements for its appearance. There are also additional design solutions that can make the structure even more chic - a cover made of transparent material, various kinds of inlays, decorative elements.
4. Parameters. Toilets come in many different sizes. Therefore, before buying, you should take measurements of the place where it will be located. In this case, one must also take into account the fact that it must organically fit into the environment already in the bathroom.
5. Manufacturing material. When choosing a toilet, it is imperative to pay attention to the material from which the product is made. The modern palette of materials is quite extensive. For the manufacture of toilets, they use not only the usual faience, but also tempered glass, porcelain and even plastic. However, the most practical is the model made of ceramic or earthenware. It is a win-win combination with any room interior.
6. Manufacturer. If you want to buy products of high quality and reliability, without spending an impressive amount on it, you can focus on domestic models. However, imported products have a more attractive appearance. And their high cost is justified by a long service life. Models of German and Italian production are in high demand.
7. Functional. Directly corner toilets in most cases are equipped with additional functions, which will certainly attract the special attention of potential buyers. So, there are products with a built-in hygienic shower or bidet. This functionality significantly increases the level of usability of the toilet.
8. Price. The cost of the corner model differs from the price of classic rectangular sanitary ware. On average, you will have to pay twice as much for a toilet designed to be placed in the corner of a bathroom.

Thus, taking into account all the criteria presented, you should carefully consider whether the corner model is suitable for the existing indoor environment. If no difficulties and barriers to purchase were found, you can safely go to the store to buy.

Rating of the best models

Floor-standing corner toilets

VitrA Arkitekt 9754B003-7201

A fairly compact model from a Turkish manufacturer that combines elegant design and high quality at the same time. Made of glazed porcelain, the non-porous surface of which does not absorb moisture and unpleasant odors. The funnel shape minimizes splashing. Equipped with a horizontal outlet (into the wall) and a mechanism for smoothly lowering the cover. The cascade flow facilitates effective bowl cleaning. The product is easy to clean and, with regular care, does not lose its original appearance even after prolonged use.

Advantages:

Disadvantages:

Ideal STANDART Connect Space E119501

The model perfectly combines constructive solutions and modern design.

The bowl, made of earthenware, is in no way inferior to porcelain models, fully consistent with them both in terms of strength and durability, and in terms of aesthetics. The oval shape of the toilet reveals to the owner all the advantages of a traditional configuration, while combining style and elegance. Fits perfectly into any bathroom interior. Thanks to a more versatile horizontal exhaust system, the toilet can be installed both close and at a certain distance from the wall.The bowl of the product has a special shape that prevents the abundant appearance of splashes, splashes and unpleasant odors. The mechanism of the drain tank provides for 2 drain modes - full and half, contributing to the economical use of water.

Advantages:

Disadvantages:

Jacob Delafon Odeon Up 18557K

A compact toilet bowl from a French company, equipped with a funnel-shaped porcelain sink, a thermo-durred seat - a lid with a "microlift" function and a pentagonal tank with a double button.

The presence of corrugation allows installation both "to the wall" and to the "floor". In addition, the model provides a silent bottom inlet, circular flush and anti-splash function.

Advantages:

Disadvantages:

Hatria You & Me YXZ601

The model is made of high-tech sanitary ware. Equipped with a horizontal type of outlet (into the wall), a "microlift" function, as well as a comfortable plastic seat.

The oval-shaped bowl is washed by a funnel-shaped stream of water. The glazed surface prevents the growth of bacteria, the formation of lime deposits and the accumulation of various types of dirt. The anti-splash system prevents the appearance of a large amount of splashes when flushing.

Advantages:

Disadvantages:

SEREL Friendly 6706

The peculiarity of this model lies in the special shape of the drain. It is displaced relative to the center of the toilet bowl with an underestimation of the water level in the hole. The material of manufacture is porcelain. Tank fittings and fasteners of sufficiently high quality show resistance to corrosion. The water is supplied from the bottom of the tank. There are also 2 drain modes - full and economical.

The glazed surface is quite dense and smooth, has low water absorption, which does not allow dirt and numerous bacteria to settle on it. The set also includes a comfortable seat made of duroplast.

Advantages:

Disadvantages:

Creavit Corner SD310

Shower toilet, consisting of an oval-shaped faience bowl, a triangular tank and a seat cover made of duroplast. The model is equipped with a special coating that prevents the growth of microbes and greatly simplifies the care of the product.

There is also a "microlift" function, a double flush button for a full and economical flow of water, a bidet for taking a hygienic shower, and a bottom line.

Advantages:

Disadvantages:

The best hanging corner models

Roca Mateo 346200000 + Geberit Sigma 111.300.00.5

Plumbing kit consisting of a wall-hung toilet bowl and a corner installation.

The structure of the toilet is an oval bowl made of sanitary porcelain and equipped with a comfortable cover seat.The type of outlet is horizontal, there is a “microlift” function and an “anti-splash” system.

The corner installation consists of a steel frame, a plastic tank and a panel with two buttons. The kit also includes a water pipe and a sewer elbow.

Advantages:

Disadvantages:

Ifo Special RP731300200 + Geberit Sigma 111.300.00.5

Flush-mounted plumbing kit, consisting of corner installation and wall-hung toilet.

The installation is a steel frame with a plastic tank, a drain pipe, a drain elbow and a two-button panel.

The toilet itself is a rimless bowl made of porcelain, equipped with a comfortable seat cover. Branch type - horizontal, anti-splash function is provided.

Advantages:

Disadvantages:

Cersanit City Clean On MZ-CITY_Con-S-DL + Geberit Sigma 111.300.00.5

A complete sanitary set, which includes a wall-hung toilet and a corner installation.

The material for making the toilet bowl is faience. The anti-splash function prevents excessive splashing when flushing. The seat cover is made of duroplast and provides a smooth lowering mechanism (no cotton).

The installation includes a rectangular steel frame, a plastic tank, a two-button panel and piping. The kit contains all the necessary fasteners.

Advantages:

Disadvantages:

Conclusion

Thus, the corner model of the toilet is a fairly practical option that allows not only to save space in a small bathroom, but also to use interesting design solutions, thanks to which the interior will become even more unique.

If you have experience in using the angular models presented in this rating, or a more interesting option, share your opinion in the comments.