The best warm skirting boards (convectors) for 2020

A common problem in apartment buildings is a warm ceiling and cold floor. Radiators transfer all the heat energy upwards, while the bottom is cooler. Therefore, a person's legs begin to freeze, and he feels uncomfortable. However, this problem can be solved, it is enough to install a special convector and the heat will be distributed evenly.

The editors of the site "bestx.htgetrid.com/en/" have prepared for you a rating of the best warm skirting boards for 2020.

Features of the device

The design is a small radiator that fits easily into the box. In appearance, the device resembles a standard plinth, only slightly thicker. Heating elements are located inside, which, after switching on, give off heat to the metal case, after which it is further evenly distributed. Water or electricity can be used as a heat carrier. Each of the options has a number of advantages and disadvantages. The main design features include:

• Small size and small footprint. Unlike radiator batteries, these devices do not take up much space. Therefore, when it is necessary to carry out repairs, it is not necessary to dismantle the entire heating system. The device is completely invisible, which allows you to correctly distribute the usable space, and if any part fails, it can be replaced without disrupting the operation of the system as a whole.
• Even distribution of warm streams. In most apartments where conventional radiators are installed, a frequent problem is uneven heating of the room. So in some areas it may be too hot, while in other parts the heat practically does not reach. All this creates inconvenience. In warm skirting boards, which are located around the perimeter of the room, heating occurs quickly and evenly, no cold areas remain.
• Influence on air flows. At high temperatures, standard heating devices make the air dry, which makes it hard for the user to breathe and has to ventilate the room. There is no efficiency from a constantly open window, since over time it will become too cold and you will have to close it. If such a problem occurs frequently, it is better to install a warm skirting board, it does not negatively affect the air masses, which makes the user more comfortable.
• High security. Thanks to a high-quality insulating layer, any household appliances and furniture can be installed next to the convector. In this case, there will be no negative impact.
• Electricity costs. Electric radiators consume a lot of power, while high-quality heating is possible when the temperature is set to maximum. Because at average, the heat will not spread. This problem is connected with the fact that up to 60% of the energy is used only for heating certain areas.In warm skirting boards, there is no such problem, compared to standard models, a person can save up to 30% of electricity, since the room heats up evenly.
• External execution. The buyer is provided with a wide selection of shapes and colors. Therefore, choosing a beautiful model for the interior features is not difficult. The person himself determines what size he needs, which allows him to save on some areas where heating is not required.

The principle of heating warm skirting boards is simple:

• First, the heated air enters the lower parts of the room.
• After that, the heat is distributed along the walls and warms them up. However, the heat does not reach the top, which is not such a big loss.

In addition, due to the fact that the warm skirting board evenly heats up the walls, the chance of mold and mildew formation is minimal. Therefore, you do not have to spend money and time on processing these areas. special substances... Traditional models do not differ in this feature, which is why damp areas are formed in some places, and such an environment is favorable for the development of microorganisms.

However, even such a system has disadvantages that can affect comfortable use:

• High price. To organize a good and high-quality heating system, you need to spend from 10,000 rubles. This cost is associated with the design features of the model, as well as the complexity of production. Therefore, warm skirting boards are not yet widely popular. Of course, there are also budget solutions, but they are more designed for apartments with low ceilings, but they are not suitable for penthouses.
• Complex installation. Most new buildings are sold already with pre-installed batteries, so a person does not need to make an effort to install a heating system. Everything is available immediately and does not require time-consuming. In addition, if the heat is not enough, then it is easier to buy an electric radiator and put it in any room. And to install warm skirting boards, you need to make a lot of effort and money, because they consist of a large number of small elements that are connected to each other. If the user does not have experience in installing such systems, then it is unlikely that it will be possible to perform these works on their own with high quality.
• Nuances after installation. At the end of the installation work, the heat will begin to efficiently distribute and heat the walls. If wallpaper is present on the latter, then over time the glue will begin to dry out, and the structure will be broken. The integrity of the material will be compromised, which will cause swollen areas to appear. The problem is solved only by gluing new wallpaper, while the substance that provides adhesion must be resistant to high temperatures. This solution will avoid problems in the future.

Varieties of warm skirting boards

There are only two types of convectors in stores. Some are powered by electrical energy, while others require liquid. To understand which option is suitable for installation, it is important to know the features of each device.

With water heat carrier

This option is most popular for indoor installations. It can be found both in residential apartments and in office buildings, shopping centers. Almost most of the European countries prefer to use such models, since their installation takes less time. In addition, it is not necessary to carry out regular maintenance. Good and uniform heating will be throughout the entire service life.

A water cooled device is a small metal panel. Inside there are small tubes into which liquid enters, then it heats up to operating temperature. The front and back sides are equipped with insulating material. The main task of the element is to protect the walls from high temperatures, which avoids the risk of damage and increases the efficiency of the device.

Another feature of the device is a large selection, which makes it available for installation in modern interiors.The equipment is installed not only in living rooms, but also on the balcony or attic. The quality of heating remains at a high level, while the cost of electricity is minimal.

Warm skirting boards with a water heat carrier have a high heating rate. Because water can easily transfer hot streams. The only thing to consider is that constant temperature control is required. Otherwise, there is a possibility of breakdown of the entire heating system.

Electric models

If water-heated skirting boards are popular due to their easy maintenance and wide choice of designs, electric skirting boards are valued for other parameters:

• Ease of installation. The electrical option does not require complex connection, the entire installation process takes place on site. It takes a minimum of time, you only need to attach the heating elements to the wall.
• Control. Most of the convectors with water do not have special regulators, which makes temperature control difficult. Therefore, a person needs to look for these values ​​in boiler rooms. In electrical systems, everything is simpler, since a special thermostat is installed there, which displays the current readings.
• Adjustability. Most devices have a special regulator. It allows you to change the temperature up or down. This solution reduces energy costs.

Despite the positive aspects, there are also disadvantages that affect comfortable use:

• High consumption. Even with a thermostat installed, such equipment consumes a lot of electricity. Of course, with minimal settings, the costs will be small, but there will be no good warm-up either. Therefore, some users refuse to do this.
• The nuances of installation. When compared with water-based thermal skirting boards, the installation process is less costly. However, there are also a number of features that do not allow it to be carried out quickly.

Rating of the best models with a water heat carrier

TurboTech TP1 - water

A high-quality device that makes it possible to create a compact heating system for any room. Air flows are evenly distributed, which creates an optimal microclimate. The box is made of durable aluminum, it prevents negative impact on the walls. The heat exchanger is made of durable stainless steel.

The main advantage of the device is its ability to withstand pressure up to 16 atm. The positive side is simple installation, which takes a minimum of time and allows you to install the product in every room.

Sold at a price of 3,300 rubles per meter.

Advantages:

Disadvantages:

Mr. Tektum watery brown RAL 8019

A reliable device that guarantees a healthy microclimate in the home. The product is suitable for installation on floors with any coating, including parquet and carpet. Thanks to the good air flow, no cold spots are formed. The risk of condensation is minimal to prevent the development of mold.

During operation of the device, the air is not burdened with dust and does not dry out. Therefore, it becomes easier to breathe. No need to open the floor for installation, everything happens on the spot. It can be used not as a main, but as an auxiliary heating system.

The average cost is 5,500 rubles per square meter.

Advantages:

Disadvantages:

Charley Standard water, white RAL9003

An efficient heating system that can be installed as an auxiliary or a main one. Heating is carried out from a coolant that comes from an external source, which is the best solution and is suitable for most rooms.The walls are heated evenly, eliminating the formation of cold areas and condensation. The device is suitable for installation in old and modern homes.

The outer casing is made of aluminum and PVC. The heat exchanger is made of copper, which guarantees long-term operation. The maximum length of one circuit is 20 meters. The tubes can hold up to 520 ml of water. The warranty period is 5 years.

Sold at a price: from 8,110 rubles for 2 meters.

Advantages:

Disadvantages:

Rating of the best electric models

Mr. Tektum electric, white RAL 9016

A quality device that guarantees efficiency and durability. The air is distributed around the entire perimeter, creating a comfortable environment for work and rest. The product consists of two copper pipes, where electrical wires are connected. The maximum temperature that can be reached by regulation is 250 degrees. The maximum length of one circuit is 12.5 meters.

Sold at a price: 10,500 rubles.

Advantages:

Disadvantages:

TurboTech TP-2

New generation electrical device suitable for installation in various apartments. The depth of the top corner is only 20 mm, which makes the device unique. The outer part is made of aluminum, which perfectly distributes air currents without leaving cold zones. The complete set includes all elements for quick installation.

The average cost is 4,100 rubles per square meter.

Advantages:

Disadvantages:

Charley Standard electric, gray RAL9006

Reliable device with a thermal output of 340 W. The product is easy to install and durable. Most of the heat energy is transferred by radiation rather than convection, which is a positive result. Operates from a network with a voltage of 220 V. Protection class - II. The heat exchanger is made of carbon steel.

Average price: 11 040 rubles.

Advantages:

Disadvantages:

Rating of budget models

SAVVA TermoPlintus

High-quality device designed for installation in residential and public areas. The product can be used as an auxiliary element or become the main one. It is recommended to install skirting boards around the entire perimeter, because this is the only way to ensure high-quality air circulation.

Sold at a price: from 2 835 rubles.

Advantages:

Disadvantages:

Infrared-convective skirting heater P-1T (IP24 B)

A reliable device that is suitable as an auxiliary heating element. It is based on a durable amorphous tape. Thanks to high-quality radiation, not only air heats up, but also furniture. Heat is distributed quickly and efficiently. Thermal power - 250 W.

Sold at a price of 3,500 rubles.

Advantages:

Disadvantages:

SoftTerm STEP PN-200

A durable device from a Russian manufacturer, which is characterized by low cost and good air flow distribution. Installation will take a minimum of time, since there are no complex elements. Maximum power - 200 W, operates from 220 V. Degree of protection - IP54.

The average cost is 2,970 rubles.

Advantages:

Disadvantages:

Finally

Sometimes steel radiators and portable convectors are not enough to organize a good heating system. To prevent the air from drying out and distributing it throughout the apartment, warm skirting boards should be used. If you have experience using the models described in the rating, or more interesting representatives, tell us about it in the comments.