Best construction mixers for 2020

The construction and repair of buildings is unthinkable without the use of concrete mixtures, cement and lime mortars, leveling screeds, adhesives, putties and groutings made by thoroughly mixing various binders and fillers with water until completely homogeneous. A significant part of them have to be prepared on construction sites in small volumes. Some formulations need to be mixed during their production to maintain their uniformity, mobility and plasticity. It is long, difficult, ineffective to carry out these works in the old fashioned way, with a shovel in a trough, and it is simply unrealistic in the presence of complex special compositions that require particularly thorough mixing. Here you cannot do without such a useful means of small mechanization as a construction mixer. The editorial staff of the site "bestx.htgetrid.com/en/" brings to your attention the review "The best construction mixers for 2020", left according to customer reviews and the opinion of experts.

A few words about the recent past

More recently, at domestic construction sites, they knew only concrete of various brands and two types of mortars: cement, for laying brick walls, and lime, so that these walls could be leveled and plastered. They were prepared at RBU - mortar-concrete units, delivered to the construction site by dump trucks. In the body of the dump truck, the trains “stratified”, the heavy fraction sank to the bottom of the body, and a liquid mass called “cement milk” formed on top.

At the site, materials were unloaded by a dump truck into a bucket and transported to the place of work. Before use, the delivered material was mixed with shovels in small containers. Nobody mixed the concrete mixture. It was loaded into the prepared formwork and processed with a deep vibrator. At the same time, the quality of work was very relative.

Everything changed at the end of the last century. Mortars and concretes were delivered to objects in concrete trucks. The concrete or masonry mixture was mixed on the way to the object, the composition did not delaminate. The quality of concrete work has improved significantly.

In addition, ready-made dry building mixtures have appeared on the market. They were delivered to objects in bags of 25 - 50 kg. It only remained to add the right amount of water and carefully move the contents.

This is where the problems began. For mixing ready-made dry mixes you need a tool. It is difficult to manually stir the mixture in a bucket and obtain the required uniformity. The owners of country houses and teams of builders engaged in European-quality repairs used electric drills and perforators for mixing, inserting first homemade and then factory devices into cartridges - whisk (or stirrers).

To some extent, this was a way out. If it was necessary to stir paint or prepare wallpaper glue, knead a small amount of cement mortar, the drill and punch coped without problems.But with a large amount of work, the preparation of viscous mixtures or concrete, drills and perforators were "killed" in batches: cartridges were broken, shafts and bearings were crushed, electric motors failed. This continued until hand-held construction mixers from Europe, Asia and the USA appeared on the market.

After some time, domestic manufacturers followed them.

Construction mixer device

The device is an electric drive that rotates a special nozzle (it is also a whisk or stirrer) for mixing the solution. For comfortable use, the drive is equipped with a convenient handle, on which the starting equipment is located (the start button and the button for fixing the operating mode of the tool).

The power consumption and the number of revolutions allow it to cope with the preparation of compositions of any viscosity, including concrete mixtures, without any problems. The design features of the body and handles allow to reduce vibration loads on the operator's body, and the tool itself can withstand serious loads without breakdowns.

What mixers are

Drill - mixer

The electric mixer is powered by mains or rechargeable batteries. There are two types of devices: mixer-drill and mixer. The first option is a low speed hammerless drill equipped with a key or keyless chuck for fixing the drill and the whisk (agitator). Some shafts are equipped with a thread onto which a cartridge or agitator can be screwed. The weight of this type of apparatus does not exceed 4 kg. Too much for a drill. Strictly speaking, like a drill, it is unlikely to please anyone. You can drill a couple or three holes for them if you don't have a normal drill or punch at hand.

The main purpose of the instrument is a mixer. It is better not to use it for mixing concrete or use it not too often and for small-volume mixes. It does an excellent job of mixing cement and lime mortars, screeds or adhesives for tiling walls and floors. The set of models of some manufacturers of drills - mixers includes a case, which is very convenient for storing the tool. Perhaps the main advantage of this type of apparatus is that it is inexpensive. If you choose a tool for the home, this is the most suitable option.

Construction mixer

Tool intended only for mixing building mixtures. Depending on the power consumption, the number of revolutions per minute, the torque, the number of spindles (one or two), mixers are distinguished for the preparation of rolling or viscous compositions. Some models successfully replace small concrete mixer, since they are almost not inferior to it in performance, they are devoid of some inconveniences associated with its use:

1. The concrete mixer has solid dimensions and weight. It requires two people to move it.
2. At the end of the work, the tool must be stored somewhere and preferably under lock and key. Finding storage space for even the smallest concrete mixer is not easy.
3. At the end of the working day, the agitator drum must be cleaned of mortar or concrete residues, otherwise the device will fail very soon. To clean the drum, you will need a lot of water and a place to drain the water.

The mixer is devoid of all the listed disadvantages. It doesn't need a lot of storage space. A single worker can move it anywhere on a construction site, including multi-storey buildings, with little effort. No buckets are required to clean the whisk. It is enough to "twist" it in a bucket of water in a timely manner and wipe it with a rag.

Which mixer to choose

There are three types of mixers depending on the power consumption:

1. For the preparation of mobile solutions of low viscosity, plaster compositions, paints and varnishes, devices with a power consumption in the range of 600 - 1000 W., a rotation speed of 500 to 900 rpm, with a single-speed electric motor and one spindle are sufficient. An example of such a tool is the Fiolent MD1 - 11E model.
2. For heavier mixtures - devices with a capacity from 1000 to 1800.As a rule, these are devices with a two-speed gearbox. Switching modes (speeds) is carried out by the translator located on the product body. At the first speed - from 130 to 450 rpm., They work with inactive, viscous mixtures and concretes. The second speed - from 450 to 1050 rpm, provides high-quality mixing of paint, plaster, putty and adhesives. Two spindles rotating the nozzles in opposite directions ensure high productivity and uniformity of the composition. The Elitech 1600 / 2ED model is endowed with such parameters.
3. Mixers with a power of 1800 watts and more, with two or three speed gearboxes are professional equipment. They are used to prepare mixtures of any viscosity with various fillers, including for mixing concrete. Professional mixers can withstand intense loads for a long time without failures and breakdowns. They are quite expensive and it is impractical to purchase them for domestic use. An example of one of the professional models is the Bosch GRW 18 - 2E Professional.

Criteria for choosing a construction mixer

1. Work intensity. For professional use, it is better to choose powerful two-three-speed devices, preferably from well-known brands known for the high quality of their products. They are more expensive, but more productive and more reliable. The costs will be paid off by long-term intensive operation.
2. Characteristics of the mixed compositions. Two or three-speed devices with a high speed of rotation of the mixer and a power of 1800 W or more are advisable to use if the team often works with heavy mortars and concrete. Devices with a power of up to 1000 W and a rotation speed of a nozzle up to 600 rpm are more profitable to use for the preparation of finishing compounds: plaster solutions and putties, adhesives and paints. If the organization performs general construction and finishing work, it is better to have tools of different types and capacities at hand.
3. For domestic use, everyone chooses the equipment himself, taking into account the upcoming nature and volume of work. Considering that the intensity of the work of a household tool is an order of magnitude lower than that of a professional one, it is better to choose semi-professional devices. They are affordable and the possibilities are wide enough.

What else should you pay attention to

It will not work to prepare high-quality solutions for various purposes with a whisk of the same type. The fillers are different for each composition. Some, heavy ones, tend to sink to the bottom of the container. Others, the lungs, go up. There are mixtures, the presence of air bubbles in which can reduce the quality of finishing work. For each type of composition, specific types of nozzles with different blades have been developed.

Straight blades.

Such whisks are used to prepare adhesives. The presence of air bubbles and foreign objects in them, even the smallest size, is unacceptable. Straight blades do an excellent job of removing air bubbles from the batch.

Spiral blades.

The most common attachments. Several spirals are wound from the bottom edge of the stem, bounded from above by a ring. Distinguish between spirals of left and right rotation. A clockwise rotating nozzle is used to prepare a starting and finishing putty, since it pushes the composition down during rotation. Mixers with a spiral of left rotation are used for the preparation of cement-sand mortars and concretes. They lift heavy ingredients upward, preventing them from settling to the bottom of the container. Two-spindle mixers use right-hand and left-hand beaters.

Oppositely directed blades are used for mixing paint and varnish mixtures. The material is liquid and splashes out at high agitator speeds. The lower spiral is engaged in mixing the composition, and the upper one "squeezes the liquid mixture down, preventing the spray from scattering.

Heavy-duty nozzles

To mix sand with crushed stone or gravel, a particularly robust mixer with blades of a certain configuration is required. A whisk for paint or putty will not last long in such conditions.

The uniformity of the material and the performance of the device depend on the correct choice of the nozzle. Do not choose stainless steel whisks with anti-corrosion coatings. This is money wasted. Any coating will “peel off after several kneading, and stainless steel is not stronger than usual. Choose a strong whisk based on the nature of the mixes. It is best to always have different types of attachments.

DIY mixer nozzle

If the wealth does not allow you to splurge on the purchase of a mixer, or the scope of the proposed work is so small that such costs are irrational, you can build a nozzle for mixing light solutions with your own hands. If the farm has a small welding machine and skills in manual arc welding, this will not be difficult. It is enough to pick up a steel bar with a diameter of 5 - 8 mm, roll a ring no more than 12 mm in diameter, weld three bars of the same diameter to it from three sides so that a cone with a height of about 100 mm is obtained. A rod with a length of 40 - 60 cm and a section of 8 mm is welded to the top of the cone. The free end of the stem is turned to give it the shape of a triangle in cross-section, to securely fix the homemade agitator in the chuck of a household drill or hammer drill. The attachment is ready.

You can do without electric welding. You will need an M 8 mm hairpin and three metal plates. The length of the plates is selected depending on the diameter of the bowl for mixing the solution. A hole with a diameter of 8 mm is drilled in the center of each plate. Then, with the same diameter, drill another pair of holes to the right and left of the central ones. A pin is threaded through the central holes of the plates. Each plate is fixed to the rod with M8 nuts from the top and bottom. The shank of the improvised nozzle is turned under the chuck of the drill (a triangle should be formed in the section). The attachment is ready.

Which company is the best mixer to buy

The number of construction mixer manufacturers is difficult to count. The numerous European, Asian and American brands were supplemented by no less numerous manufacturers from the countries of the former USSR. Consider the best manufacturers that have proven themselves in the production of quality instruments from different parts of the world.

Bosch

The oldest and one of the most famous German companies producing high quality household appliances. The engineer and inventor Robert Bosch founded it in 1886. The Bosch group is currently one of the ten largest manufacturers of household and professional electrical equipment and tools in the world.

Interesting! Robert Bosch was the first to move his workers to an 8 hour workday and two shifts, believing that only a well-rested worker could produce high quality products. His motto: "It's better to lose money than customer confidence."

Hitachi

One of the largest electrical goods companies in the world. The range of its products includes over 200,000 units. Hitachi is one of the world's leading manufacturers of information technology equipment, household electrical appliances and electronics. Founded at the beginning of the 20th century in Tokyo.

Interesting! Hitachi, translated from Japanese - dawn. So, according to the founder of the company, its activities are aimed at improving the quality of life of customers with the help of high-quality Hitachi equipment.

Makita

Another Japanese company leading in the production of household and professional power tools. Founded at the beginning of the last century. The company produces popular models of high-quality professional and household tools with electric and gas-powered engines.

Stanley

The company, formed in the USA in 1843, originally manufactured bolts and bolts. Over 150 years of its existence, the company has become one of the most powerful manufacturers of household and professional power tools, renowned for their reliability and durability. The popularity of Stanley models is due to their performance and excellent durability.

DeWalt

The brand is owned by the American concern Stanley Black & Decker. The company was founded in 1924. Since 1994, it has been manufacturing cordless power tools and produces the most powerful cordless drill at that time - a 14 V wrench. Currently, it is the leader in the market of power tools powered by batteries and brushless motors. An example of this is the DeWALT DCD 240N model powered by a battery (accumulator battery), with a voltage of 54 V.

Interskol

A Russian company that is a leader in the production of power tools not only in Russia, but also abroad. The company's products are supplied to the markets of Western Europe and Israel. It is in demand among professionals due to its high quality and reliability.

Hummer

A relatively young German company. Year of foundation 1987. In a short period of time, she achieved significant success in the production of garden equipment and power tools. Hammer products are of high quality, durability and affordable prices. Very popular among professionals.

The list of companies producing quality tools can be continued for a very long time. When planning to purchase a mixer, you should ask the advice of professional builders and finishers, listen to the advice and recommendations of experienced users buying a power tool for domestic use. Specialist store sellers can tell a lot of interesting things. Before buying, be sure to study the description, ask how much your model costs and where are the service centers for its maintenance.

Rating of quality construction mixers

Fiolent MD1 - 11E

The tenth line in the rating is taken by the product of the Russian brand "Fiolent", model MD1 - 11E. Simple and reliable mixer with drill function. With a power consumption of 1.1 kW and a maximum torque of 85 N • m, the machine has impressive performance compared to a drill or hammer drill. In addition, these parameters make it possible to use the product as a yamobur, if you buy the appropriate nozzle and stand, which is also useful when mixing solutions, since Fiolent weighs 4.7 kg. Electronic speed control promotes high-quality mixing of compositions of any consistency, from preparation of wallpaper glue to cement screed. An excellent tool for household and professional use, with an average price of 3,745 rubles.

Advantages:

Disadvantages:

Hammer UDD 1050A

In ninth place is the UDD 1050A, a Czech - German brand Hammer. The company's mains power tool is renowned for its quality, reliability and durability. Power of 1050 W, sufficient for professional use. It copes well with mixtures of any viscosity, does not leave lumps, can be used as a drill. The maximum hole sizes for metal do not exceed 13 mm, for wood - no more than 32 mm. Package Included:

• rim, 120 mm long, 14 mm in diameter;
• whisk extension;
• side and rear handles;
• jaw chuck clamps drills with a diameter of 3 to 16 mm;
• keys for 17.19 and 22 mm.

Electronic control of rotation speed and reverse provide high-quality preparation of solutions of any viscosity. The model is equipped with a handle - a stop on the back side and a removable side handle, which is very convenient when using the tool as a drill and mixer. Convenient pistol grip, cam chuck and relatively low weight (4 kg) make the Hammer UDD 1050A a good drill. The delivery set includes a whisk for mixing, with an adapter and an extension. The main whisk is convenient for mixing small volumes of building mixtures in small containers. The whisk extension allows mixing in containers with a large volume. Buyers appreciate the Hammer UDD 1050A for its performance, reliability and an affordable price tag of RUR 4,770.

Advantages:

Disadvantages:

Metabo RW 18 LTX 120

In eighth place is the German drill - mixer Metabo RW 18 LTX 120. The tool is powered by a removable battery with a voltage of 18 V. The rotation speed of the mixer in idle mode is 750 rpm. Designed for household and professional use when mixing light and mobile solutions. The manufacturer does not recommend making mixes larger than 40 liters. Users appreciate this device for its lightness (4.2 kg) and portability. Typical battery charging times range from a few hours to a day, depending on the remaining charge. Metabo's concept is to completely eliminate network cables on construction sites. The average cost of the device is 16,965 rubles.

Advantages:

Disadvantages:

Caliber ERMD -1600 / 2E

The products of the Russian company "Caliber" are known as "a good tool from China." This fully applies to the model Caliber ERMD -1600 / 2E. Power 1600 W, 750 rpm. idling, two speeds, two spindles with rims and left rotations - all these characteristics imply professional use of this model. The start button is conveniently located on the ring-shaped handle, the speed switch on the body. The rotation speed is adjusted by pressing the start button. Whisks of right and left rotation allow you to very quickly prepare a solution of any viscosity in significant volumes. The purchase will cost 5329 rubles. This is the average cost. According to buyers, this is a good budget tool for professionals. The model ranks seventh in the ranking.

Advantages:

Disadvantages:

Interskol KM - 60 / 1000E

In sixth place in the rating is the model of the leader in sales of quality tools in Russia - Interskol KM-60 / 1000E. In terms of its parameters, the device is more consistent with a household tool:

• Power consumption 1050 W.
• Idling speed - 850 rpm.
• The number of spindles (and beaters) - 1.
• The weight of the device is 4.3 kg.

However, the tool is in high demand among professionals. Two-speed operation and a maximum torque of 53 N • m, these are the characteristics of a professional model. Its relatively low weight makes it indispensable for finishing teams in the construction of multi-storey buildings. The model is appreciated for ease of use, high performance, endurance and reliability, no overheating during intensive use. The delivery set includes a whisk with an extension bar and a set of keys. On the ring-shaped handle, there are conveniently located start and turn-on lock buttons. There is an electronic adjustment of the spindle speed. Average price of the product: 5997 rubles.

Advantages:

Disadvantages:

Elitech 1600 / 2ED

The fifth line in our rating is occupied by the professional model of the Russian brand Elitech 1600 / 2ED. A two-spindle device with a power of 1600 W, issuing 790 rpm, is capable of working with compositions of any consistency, from plaster solutions to concrete mixtures. On and off buttons are located on a convenient ring-shaped handle. Nearby, on the case, there is a switch for selecting one of two speeds. Equipped with two rims of right and left rotation, for high-quality mixing of the compositions, with a 3 meter power cable. Users love the ease of access to the brushes for quick replacement. Average cost of the model: 5997 rubles. Quite affordable price for a professional tool.

Advantages:

Disadvantages:

STANLEY SDR1400

In fourth place in our rating is the model of the American concern STANLEY SDR 1400. The device has impressive technical characteristics:

1. Power 1400 W.
2. Rotation frequency - 800 rpm.
3. Torque - 80 N • m.
4. Number of speeds - 2.

All this puts it on a par with a professional tool. At the same time, the device is much lighter than many similar devices. Its weight is 3.5 kg. With high productivity, working with it will not be tedious. A whisk with an extension bar allows you to mix the compositions equally effectively and efficiently in dishes of various capacities, without spraying with the operator's solution. The power and lock buttons are located on the comfortable handles. The average cost of the product is 7049 rubles.

Advantages:

Disadvantages:

Makita UT1200

The three leaders of the rating are opened by a Japanese-developed and German-made tool - Makita UT1200. Manufacturers position this model as a professional power tool designed to work with mobile (not too thick) mixtures. These include paints, adhesives for wall and floor cladding with ceramic tiles, plaster and putty mixtures. Its technical characteristics confirm this:

1. The power of the device is 800 W.
2. In idle mode, it spins up to 400 rpm.
3. Operated in single speed mode only.

However, the tool does its job perfectly well. Even with continuous operation, the device does not overheat, does not break and has a well-deserved reputation as an "unkillable" mechanism. Its weight, equal to 3.2 kg, is the minimum for a tool of this type. The product is equipped with a convenient ring handle with power and lock buttons on it. There is an electronic speed control. The combination of Japanese technical thought and German quality and accuracy during assembly delights users for many years. A little annoying is the average cost of the device, equal to 8450 rubles. What to do, you have to pay for the quality. According to most buyers, the Makita UT1200 justifies the cost of purchasing it with many years of intensive operation without breakdowns and malfunctions.

Advantages:

Disadvantages:

Hitachi UM16VST

The second place in the ranking is occupied by another representative of the land of the rising sun, the construction mixer Hitachi UM16VST. Power consumption of 1500 W, idling speed of 1050 rpm with a maximum torque of 45 N • m, allow this device to cope with the most "tight" mixtures without breakdowns and stops. Users leave rave reviews about it. High quality concrete mixtures come out from under its rim, especially with the addition of plasticizers - special additives that increase the mobility of the concrete mixture. The average price of the product is 10609 rubles.

Advantages:

Disadvantages:

Bosch GRW 18 - 2E

The first place in the rating and the best customer reviews is won by the product of the oldest and most famous German company - Bosch GRW 18 - 2E. Her product is a powerful professional apparatus with parameters:

1. Power consumption - 1800 W.
2. The number of revolutions per minute in idle mode is 1050.
3. The maximum torque is 45 N • m.
4. Two speed modes.

This power allows the device to cope with any mix of building mixtures without restriction. Bosch household appliances have always been distinguished by high build quality, reliability and durability.The GRW 18 - 2E proves this rule once again with its trouble-free operation under the most intensive use. The average price of the product is quite high - 20090 rubles. For domestic use, the device is not worth buying at this price. But for a professional interested in many years of intensive use of the tool, this model can become irreplaceable.

Advantages:

Disadvantages:

Model name	Specifications	average price
Bosch GRW 18 - 2E	Type - mixer The number of speeds of work - 2 Power supply - from the network. Max. idle speed - 1050 rpm. The maximum torque is 45 Nm. Power consumption - 1800 W. Functions and capabilities - mixer. Opportunities: electronic speed control. Attachments: lock of the power button - Weight 7.2 kg. Complete set - a whisk. .	20090 rubles
Hitachi UM16VST	Type - mixer The number of speeds of work - 2. Power supply - from the network. Max. idle speed - 650 rpm. Power consumption - 1500 watts. Functions and capabilities. Mixer. Opportunities: electronic speed control. Attachments: locking the power button. Weight - 5.6 kg. Complete set - stirrer, keys.	10609 rubles
Makita UT1200	Type - mixer. The number of speeds of work - 1. Power supply - from the network. Max. idle speed - 400 rpm. Power consumption - 800 watts. Functions and capabilities - mixer; electronic speed control. Accessories - Power button lock. Weight - 3.2 kg.	8450 rubles
STANLEY SDR1400	Type - mixer. The number of speeds of work - 2. Power supply - from the network. Max. idle speed - 800 rpm. The maximum torque is 80 Nm. Power consumption - 1400 W. Functions and possibilities: Mixer. Opportunities: electronic speed control Attachments: locking the power button; network cable length - 2.5 m. Weight - 3.5 kg. Features: diameter of the mixing nozzle - 140 mm.	RUB 7049
Elitech 1600 / 2ED	Type - mixer. The number of speeds of work - 2. Power supply - from the network. Max. idle speed - 790 rpm. Power consumption - 1600 W. Functions and capabilities - Mixer. Opportunities: electronic speed control. Adaptations: locking the power button. The length of the network cable is 3 m. Weight - 7.6 kg. Complete set - mixer attachment (2 pcs.). Features - quick replacement of motor brushes.	5997 rubles
Interskol KM -60 / 1000E	Type - mixer The number of speeds of work - 2. Power supply - from the network. Max. idle speed - 850 rpm. The maximum torque is 53 Nm. Power consumption - 1050 W. Functions and capabilities: mixer; electronic speed control; locking the power button. Weight - 4.3 kg; Complete set: auger whisk, auger bar, keys.	5997 rubles
Caliber ERMD -1600 / 2E	Type - mixer. The number of speeds of work - 2. Power supply - from the network. Max. idle speed - 750 rpm. Power consumption - 1600 W. Functions and possibilities: mixer. Opportunities: electronic speed control; locking the power button. Weight - 7.2 kg.	5329 rubles
Metabo RW 18 LTX 120	Type - mixer. The number of speeds of work - 1. Battery powered. Max. idle speed - 750 rpm Opportunities: electronic speed control removable battery, voltage 18 V. Attachments: locking the power button. Weight 4.2 kg. Equipment whisk (without battery and charger).	16963 rubles
Hammer UDD1050A	Type - hammerless drill. The type of cartridge is key. The number of speeds of work - 1. Power supply - from the network. Chuck diameter - 16 mm. Max. idle speed - 550 rpm. Power consumption - 1050 W. Max. drilling diameter (wood) - 32 mm. Max. drilling diameter (metal) - 13 mm. Functions and capabilities - Mixer. Features: reverse, electronic speed control. Additionally: additional handle, power button lock. Weight - 4 kg. Equipment: whisk 120mm M14, whisk extension M14, side handle, rear handle, cam chuck 3-16mm, chuck adapter, keys (17mm, 19mm, 22mm)	4770 rubles
Fiolent MD1 - 11E	Type - mixer. The number of speeds of work - 1. Power supply - from the network. Max. idle speed - 600 rpm. The maximum torque is 85 Nm. Power consumption - 1100 V. Max. drilling diameter (wood) - 40 mm. Max. drilling diameter (metal) - 16 mm. Functions and capabilities - mixer / drill. Opportunities: electronic speed control Accessories: additional handle, power button lock. Weight - 4.7 kg.	3745 rubles

The market for modern power tools is saturated with offers from numerous manufacturers. We have considered hardly a tenth of them. The choice of one or another version of the mixer depends on whether it is purchased for domestic or professional use, the volume of the proposed work, the nature of the building mixtures, and of course, on the cost of the tool. We hope this article gives you some understanding of this type of equipment and helps you avoid mistakes when choosing the right model.