Best chain sharpeners for 2020

Every summer cottage owner wants to have a powerful and sharp chainsaw that can handle any product without any problems. However, it is important to understand that such a device is highly susceptible to wear, where the chain takes more impact. It is not profitable to buy a new cutting element every time. Therefore, people began to produce special equipment that allows sharpening in a few minutes, improving cutting properties at times. But one should not only know that such a unit exists, but also how to choose it correctly. To make it easier to do, the editors of the site "bestx.htgetrid.com/en/" have prepared for you a rating of the best chain sharpening machines for 2020.

The advantages of buying a machine

The teeth must always be in a sharp condition, every lumberjack knows this. However, most people often ignore this rule. Often, in order not to sharpen frequently, they buy chainsaws with reinforced links, of course, this option will last many times longer, but sharpening the teeth will be more difficult.

You don't need special knowledge to identify a broken chain, everyone will be able to notice this, since the tire's permeability becomes worse, vibration increases from this, and the temperature almost doubles. It is not recommended to work with such a device, since the owner can completely ruin the chainsaw, and safety precautions are also violated.

A professional's chain dulls more slowly than a beginner's. This is due to the fact that a person who has a lot of experience knows every nuance of the work and prefers to cut only the material that the device can handle. When the product is used in unsuitable conditions, the chain deteriorates 3 times faster. It is also important to pay attention to the consumption when it rises - this is the first sign of deteriorated condition of the teeth.

Not for every user, buying a grinding equipment may be a useful decision, but the device is perfect for those who cannot imagine their country life without a saw. Its presence contributes to the rapid elimination of the malfunction, which will increase the performance at times. Moreover, some manufacturers produce cheap products, the purchase of which will pay off immediately. A person no longer has to choose a new tire or spare chain in the store.

Main structural elements

The equipment is an assembly cut-off device, the only difference is in the discs. Instead of a sharp one, a grinding machine is installed in the machine. The cost of one sharpening product rarely exceeds 200 rubles, and its efficiency and performance characteristics are at a high level. A grinding wheel with a thickness of 3.5 mm is often used, a smaller value is allowed.

The disc is fixed to the frame, where the hanging head is present and clamped with a reliable vice. The working part of the saw is mounted on the structure using special clamps. The disc moves smoothly along each cutting element, sharpening.

Before using the grinder, it is important to make the preliminary settings. The angle of inclination should correspond to the step of the links, this is the only way to achieve professional sharpening.

Before using the device, attention should be paid to the instructions, especially for inexperienced users. It describes the way of operation, the technical characteristics of the equipment, advice on setting up, as well as rules for storage and use.

Some people create such machines with their own hands, they just rework the main elements of the chain saw. However, not every person can do this, it is important to consider this before trying to save a couple of thousand. After all, there is a risk of saw damage due to inaccurate actions.

In addition to sharpening, the machine makes it possible to straighten chain links, which is very important in some moments. Since such an action makes it possible to extend the functionality of the product.

Varieties

There are three types of grinding machines in total: manual, electric and universal (semi-automatic). There are two types in stores:

• Amateur models;
• For professional use.

Also, the design is divided according to the automation method:

• IN automatic option, the disk rotates with an electric motor. With such a device, you can easily and quickly straighten teeth, while maintaining the accuracy at the highest level. To work with such a product, special skills are not required, even a beginner is able to sharpen the chains after reading the instructions. The most important thing is to tightly install the cutting element inside the holder to prevent accidental breakdown, which can not only damage the device, but also harm your health.
• Manual models can be both stationary and compact. The mechanical process is efficient in that it does not require electrical energy. The design can be used anywhere, even in a deep forest. After stripping, the chain is not demanding for maintenance; a person only needs to blow the links with a compressor and lower them into engine oil. Using such a device is slightly more difficult than using an automatic one, because the process is time-consuming and requires additional skill. It will not work just to buy and use the device. Therefore, looking at the low price tag is not recommended.
• Also, there are universal constructions. In terms of functionality, the device is in no way inferior to the previous version. Its main advantage is that, in addition to the saw, you can sharpen drills, a knife, etc. On the one hand, this is a bargain, but this design has a lot of fakes.

Criterias of choice

Some automatic machines have useful features that cannot be found in mechanical representatives. For example:

• Vise self-locking system;
• Tension control;
• Devices for carrying out wet grinding;
• High-quality cooling of the chains;
• The presence of protective covers, which reduces the risk of injury.

In addition to the chainsaw, the machines can be used to sharpen other garden tools, the efficiency will still remain at a high level.

One of the main indicators is the diameter of the grinding wheel; it is important to consider it when buying a grinding machine. The scope of application of the device depends on this value, products up to 115 mm are suitable for a summer cottage, while in industrial enterprises the diameter should not be lower than 400 mm. Knowing this nuance will allow a person to save money.

The optimum rotational speed of the disk is from 3000 to 7500 rpm. If a person does not plan to use the device every week, then it is necessary to choose products with a power of up to 200 watts. It is not recommended to take devices with 500 W, as this increases the cost of electricity. In addition, such designs are more intended for factory use.

Rating of the best mechanical (manual) machine tools

PATRIOT PG-CFG

A compact model that is perfect for use in the country. With such a device, a person can install even round files without problems. Suitable for sharpening any chain. The product is reliable, lightweight and does not take up much space. The case is made of high-quality metal, however, it is not recommended to neglect the operating rules, and the device is allowed to be used only in a room with normal conditions.

The average cost is 1,700 rubles.

Advantages:

Disadvantages:

CHAMPION C6500

An excellent mechanical device that will provide the user with a high-quality and sharp chain for maximum duration. The device easily handles standard hand saws as well as electric and gasoline saws. When buying such a unit, remember that the file is not included in the package.

The average price is 800 rubles.

Advantages:

Disadvantages:

DDE GT010B

A reliable budget device designed for manual sharpening of cutting tools. The body is made of durable alloy. The model has a small size, which makes transportation easy. The weight of the device is 550 grams. The set includes only instructions and the machine itself, files are purchased separately.

Sold at a price of 1,000 rubles.

Advantages:

Disadvantages:

REZER HSB-303

An excellent device from a good manufacturer that will allow you to sharpen effectively. Turning is allowed without removing the chain from the bar, which is a great advantage. Weighs 590 grams. Manufactured in Russia. Small dimensions make it possible to take the device anywhere and restore the cutting properties of the chain in a few minutes.

The average price is 1,070 rubles.

Advantages:

Disadvantages:

LUX-TOOLS

A cheap Italian device that has been produced for more than a year. The product is completely compact and will not take up space even in a backpack. Each element is made with high quality, there are no complicated solutions. This allows you to operate the device for a long time.

Sold at a price of 600 rubles.

Advantages:

Disadvantages:

The best automatic machines

Huter ECS-100

An excellent device with a 100 W motor, will provide high-quality sharpening in a minimum time. The disc rotation frequency is 5200 rpm. The protective cover is made of durable plastic that will not break from accidental mechanical shock. The guide bar fits tightly.

The average price is 2,500 rubles.

Advantages:

Disadvantages:

PATRIOT MG 220

A reliable device of a famous brand. The machine will perfectly cope with any cutting elements, including chains. Assembled with high quality and for a long time, which is noted by most buyers. The power of the electric motor is 85 W, but despite this, the circle rotates at a speed of 4800 rpm.

The average cost is 2,300 rubles.

Advantages:

Disadvantages:

VORTEX SZTs-200

An excellent tool with convenient adjustment, suitable for both professional use and beginners. Produced by a popular Russian company that has established itself on the market for more than a decade. The power of the electric motor is 200 W, while the rotational speed is 6000 rpm. in min.

The minimum cost is 2,080 rubles.

Advantages:

Disadvantages:

CHAMPION C2000

Not a bad budget option, which makes it possible to sharpen the chain in the shortest possible time. For greater convenience, there is a manual tilt adjustment. The rotational speed is 4800 rpm. Per minute, while the power is 220 watts.

Sold at a price of 2,000 rubles.

Advantages:

Disadvantages:

REZER EG235-CN

Reliable and high quality automatic chain sharpening machine. Suitable for professionals and amateurs who have repeatedly come across similar equipment. The body is metal, made of a good alloy that can withstand long-term work and mechanical shock. Engine power - 235 W.

The average price is 6 400 rubles.

Advantages:

Disadvantages:

DIOLD MZ-0.13

A well-known Russian company that specializes in the production of high-quality and affordable equipment for home and construction. The machine is made of reliable materials and is suitable for inactive use at home. Handles any type of saw without any problem. The motor power is 130 W.

Sold at a price of 2,500 rubles.

Advantages:

Disadvantages:

Rating of the best machines up to 2,000 rubles

PATRIOT MG 220

This option is for home use only. The equipment does not take up much space on the desktop and will allow you to sharpen the saw and other cutting elements. Equipment power - 85 W.

The average cost is 1,665 rubles.

Advantages:

Disadvantages:

Slogger S220

A simple tool for sharpening various chains. Equipment power - 200 W. The device was designed for long-term use in workshops. The protective cover is made reliably and of high quality and will protect the user in the event of an unforeseen situation.

The average price is 1,900 rubles.

Advantages:

Disadvantages:

Rezer EG 180-C

An excellent budget option that is suitable for those who cannot buy expensive equipment. This is a reliable device that will cope with any chain sharpening, even in large volumes. The main advantage is that it does not require additional fixation. Molded support provides reliable stability. Does not leave traces of dents from mechanical shock and retains a presentable appearance for a long period.

The average cost is 1,865 rubles.

Advantages:

Disadvantages:

Instar STCH 60210

An excellent machine with an original appearance. Able to handle any chain. A comfortable handle is located on top, which makes it possible to smoothly adjust the angle of inclination. The grinding wheel has a speed of 6300 rpm, which is a good result, especially for a budget model. Equipment power - 210 W.

The average price is 1,900 rubles.

Advantages:

Disadvantages:

Finally

It is necessary to take care of the chain, since the performance of the entire tool depends on it. If you have experience using the models described in the rating, or more interesting representatives, tell us about it in the comments.