Today you can find a laser cutting machine that fits easily into a garage. This will allow you to organize your own workshop and carry out engraving, as well as cutting hard materials. However, you need to spend a lot of time to find a suitable option. Most of the products that are presented on the modern market start at a price of 500,000 rubles, but some manufacturers are trying to reduce the cost and produce budget devices. To make it easier to find a good model, the editors of the site "bestx.htgetrid.com/en/" have prepared for you a rating of the best laser cutting machines for 2020.
Content
Criterias of choice
When looking for a good machine, you should know which parameters are paid attention to first. It is also important to determine for what purpose the equipment is being purchased, this will help to reduce the time costs by 2 times.
- The first thing that is taken into account is the material of manufacture of the emitter. To do this, you need to know the firms that produce these products. Basically, you should trust only well-known brands, as you can find more information about them.
- To know the performance of a machine, attention is paid to the technical characteristics of the mechanical components. It is better to buy products with a sturdy case and easy maintenance.
- The presence of a factory warranty, as well as the quality of products that are included in the kit.
- Ease of use.
- Ability to work with multiple workpieces.
- How long can the laser be used in one turn.
Most of the companies that produce such equipment are located in China, the USA and Austria. At the same time, the duration of the guarantee is different for everyone, if the maximum period for Chinese devices is up to 2 years, then the Austrian figure is twice as large.
Varieties of emitters
The emitter is an important element in any laser cutting machine, the accuracy and quality of the cut directly depends on its quality. In some models it is made of glass, in others it can be metal or ceramic. To better understand the benefits of a particular material, you should know:
- The lifespan of glass models is approximately 2000 hours, and there is no guarantee for their operation. The main feature of the product is its low cost. It is important to know that with prolonged use of the device, it will start to overheat, which will affect the quality of the cut. If the emitter is constantly exposed to high temperatures, then over time, cracks will form on it, through which gas will escape, respectively, the power will be lost.
- Metal versions are manufactured with a soldered body. This solution increases the reliability and tightness of the product. Unlike previous models, it can be used for 20,000 hours while maintaining a high level of cut quality. Also, the advantages of this emitter include: the ability to process only a certain layer, while not charring the neighboring ones.
- The most expensive option found in premium machines is ceramic.Its advantage is that it has a lifespan of 50,000 hours, while maintaining gas refueling. Therefore, the price for the emitter is high. It should also be remembered that such a model is intended only for operation with high-quality equipment, the price of which starts from 1,000,000 rubles.
If a person sets a goal to buy a device for working at home, then one should first focus on the price, and then select the options of interest according to the technical characteristics. Because even the simplest device can last over 8 years, especially if the load is infrequent. At the same time, the payback period will occur several times faster.
Optimum power and working principle
Most beginners do not understand how the device works and what it takes to do it. To understand how it works, just look at how engraving or cutting is done in production areas.
The first thing the operator does is sit down at the computer and create a specific form in the appropriate graphic editor. In the second step, he prescribes all the passes of the laser beam. The information is then transferred to the machine and the process begins.
To make a cut, you just need to specify the thickness of the material and start the machine. All operations occur automatically, a person should only monitor the correct performance of the work.
Most businesses or home workshops try to buy small format machines. They are mainly purchased for working with plywood and engraving on stainless steel. The power of the emitter is 40 W, for such purposes this value is sufficient. But devices with 60-80 W and higher are also sold. They are more focused on the professional field, where it is necessary to carry out incision operations with various materials every day.
Rating of quality inexpensive laser cutting machines
Foton-L460R 60W
High-quality and high-precision equipment suitable for engraving and cutting thin metal sheets. A signal processor - DSP is used to control the device. Also, the equipment supports the function of autonomous operation if an unplanned power outage occurs, which increases the reliability of the device.
In addition to cutting thin metal sheets, the device supports the function of applying graphic images to wood, paper, crystal and plexiglass. There is an opportunity to work with cylindrical objects. This option increases the area of use of the machine. The device is recommended for use in the shoe industry, but it is also suitable for printing and advertising.
The power of the laser beam is 60 W, which is an excellent solution for working with both paper products and metal. Powered by 220 V. Dimensions of the working surface - 600x400 mm. The table is controlled by a special program. The maximum speed of drawing a graphic image is 500 mm per second, the cutting time is 100 mm per second.
The product has a good positioning accuracy of 0.01 mm. Cutting thickness 0-15 mm. A USB cable is used to transfer information. The device supports Windows. To keep the efficiency of the device at the highest level, the manufacturer installed a high-quality cooling system, plus added a sensor that monitors the water level. The mass of the device without packaging is 80 kg. Dimensions - 1020x740x640 mm.
Sold at a price: from 135,000 rubles.
Advantages:
- Good cut quality;
- Simple operation;
- Small size;
- Low cost;
- The possibility of engraving;
- Cutting thickness - 15 mm;
- Works with popular editors;
- Water control sensor;
- Equipment.
Disadvantages:
- Not found.
RAYLOGIC 11G 530
A quality water-cooled instrument suitable for a variety of materials. The laser tube comes from a popular manufacturer. The design uses an ignition unit from Ampetech. The maximum lifting height of the worktable is 250 mm.The surface is made in a standard way: lamellas with a diamond shape. To facilitate the control process, a 3.5-inch color display is used.
The laser tube uses carbon dioxide to function. The limiting wavelength of the emitter is 10.6 µm. Management takes place thanks to a multitasking processor. In the event of an emergency, a special button is provided that stops the current process. It is recommended to use only distilled water for the heating medium.
Another feature of the device is comfortable use, which became possible thanks to some functions:
- Fast change of table height;
- Zonal separation of hoods;
- The compressor is switched on from the program;
- Reading information from a USB drive;
- Network cable management.
The device is capable of processing materials such as:
- Wood;
- Acrylic;
- Triple glazing;
- The cloth;
- Chipboard;
- Plastic;
- Cardboard;
- Ceramics;
- Glass;
- Corrugated cardboard;
- Polyurethane.
The service life of the emitter is 2000 hours, with infrequent use it will last for several years.
Sold at a price: from 225,000 rubles.
Advantages:
- Color display;
- High quality cooling;
- Long service life;
- Good emitter;
- Water flow sensor;
- Laser designator;
- Accuracy.
Disadvantages:
- Not found.
MCLaser 3020
A budget option that is suitable for starting a business. The laser power is 40 W, this value is enough to cut thin sheets of metal, as well as apply various images to cardboard, paper, fabric, glass, etc. The advantage of the product is lifetime technical support, you only need to submit the purchase documents.
The kit includes a pump to provide water cooling so that the radiator does not overheat. There is an exhaust system to remove harmful compounds that are formed during operations. The laser designator will increase the accuracy of the work. Reciprocating compressor required for timely blowing of the working surface. A disc with video instructions will allow you to spend a minimum of time on the installation process.
Sold at a price of 62,000 rubles.
Advantages:
- Low price;
- Quality cutting;
- Simple setup;
- Long service life;
- LCU;
- Accuracy;
- Convenient compressor.
Disadvantages:
- Not found.
ZERDER MINI 2030 TABLET
A budget model that fits easily on a desk and is controlled using a tablet. The laser tube is made of high quality materials to guarantee long-term operation without any problems. The machine is used for cutting through paper, fabric, glass, polyurethane, stone, etc. However, the product cannot cope with metal surfaces.
The maximum power of the laser tube is 30 W, while the service life is 1500 hours. In addition, a distinctive feature of the device is its high accuracy, which is practically in no way inferior to a professional solution. The device is moved using roller guides.
Average cost: from 66,000 rubles.
Advantages:
- Efficiency;
- Dimensions;
- Honeycomb surface;
- Easy moving;
- Tablet for control;
- Good power;
- Processing precision.
Disadvantages:
- Not found.
Rating of the best models of the middle price segment
TS 1060 (100W, W4 RECI)
A reliable device designed for high-quality cutting and engraving of any materials, except metal. The device is perfect for the advertising sector, where you need to apply logos on acrylic, plastic, paper, etc.
The control system is highly reliable and durable. The interface will be understandable even to an inexperienced user. In addition, the product is highly accurate thanks to quality guides that move the laser head without delay. For greater convenience, a through-type table is used, thanks to which a person can cut long products.
The laser tube has a power of 80W with a service life of 10,000 hours.The control is carried out by means of the built-in LCD display, which has the corresponding keys. Supports the ability to install a USB drive.
Sold at a price of 306,000 rubles.
Advantages:
- Strength;
- Convenient operation;
- High accuracy;
- Efficiency;
- Performance;
- The service life of the emitter;
- Optimal cost.
Disadvantages:
- Not found.
Bodor BCL0605MU
A small device designed for professional cutting and engraving of non-metallic products. Due to its compact size, the device can be installed almost anywhere.
The design has special holes that remove unpleasant odors. To make it easier to observe the state of the workpiece, a special window is used. The table is made of stainless steel; a special screw is used to raise it.
The feature of the electric motor is low noise and vibration. This ensures high accuracy and productivity.
Sold at a price: from 362,000 rubles.
Advantages:
- Long service life;
- High-quality processor;
- Accuracy;
- Performance;
- Design;
- Wi-Fi support.
Disadvantages:
- Not found.
GM-1610 Reci W4, Chiller CW500
A reliable option that allows you to process stone. The design feature is the ability to quickly disassemble the case for maintenance. There is a special block to control the device.
Laser power - 80 W. The engraving speed is 700 mm per second. Maximum material thickness for cutting is 20 mm. It is recommended to use the device at temperatures between 10 and 45 degrees. Water cooling is used to cool the laser. Powered by 220 V.
The average cost is 450,000 rubles.
Advantages:
- Clear software;
- Simple maintenance;
- Efficiency;
- Accuracy;
- The service life of the emitter is 5000 hours.
Disadvantages:
- Not found.
Top 3 premium models
Raycus 750W SEKIRUS P2602M-1309
An efficient machine for large-scale production. The power of the laser beam is 750 W, which will allow you to process any material in a short period of time. Distilled water is used for cooling. The guide rail is manufactured by Taiwan HIWIN, which ensures comfortable operation throughout the entire operating life.
Sold at a price of 3 388 000 rubles.
Advantages:
- Cuts through stainless steel, brass, copper and titanium;
- Power;
- 3 years warranty;
- Effective cooling;
- Long service life.
Disadvantages:
- Not found.
LTT Z2513QH
A budget option that is designed for shallow engraving of non-metallic materials. The working space is 2500x1300 mm, which is a suitable solution and is suitable for many elements. Thanks to this machine it is possible to cut steel up to 1 mm thick. The emitter power is 180 W, while there is an adjustment.
Sold at a price: from 1,000,000 rubles.
Advantages:
- Durability;
- High performance;
- Chiller 5000 as a gift;
- Large processing field;
- Automatic altitude tracking.
Disadvantages:
- Not found.
Rabbit Flat Bed 1525
A professional multifunctional device that is essential for precise cutting of various materials. The laser tube has a power of 130 W and a service life of 10,000 hours. The power is regulated using a special program. Engraving speed - 400 mm per sec, cutting - 200 mm per sec. Positioning accuracy - 0.015 mm.
Sold at a price: from 1,005,000 rubles.
Advantages:
- Good power;
- Efficiency;
- High quality cooling;
- Clear software;
- Simple maintenance;
- There is USB;
- Memory capacity 128 MB;
- Power consumption - 1600 W.
Disadvantages:
- Not found.
Finally
When buying a laser cutting machine, you should pay attention to many technical parameters, but the main element is the emitter.To make it last as long as possible, it is better to purchase models from top manufacturers. If you have experience using the machines described in the rating, or more interesting representatives, tell us about it in the comments.
