The best wall molds for 2020

Up to 80% of people living in an apartment or a country house face mold. If development is not prevented in time, then in a few days it will cover a twice as large area. The consequences of this process are devastating. It is important to use effective solutions to prevent biocorrosion and biodegradation of building materials. The editors of the site "bestx.htgetrid.com/en/" have prepared for you a rating of the best mold remedies for 2020.

general information

Mold appears suddenly and today it remains one of the serious problems for any residential complex or house. Being in a room where the walls are covered with these mushrooms is life-threatening, as the coatings can collapse at any time.

The problem is common not only in old apartment buildings, but also in new buildings. However, in the latter case, the chance of its occurrence is not so great if the ventilation of the room is properly organized.

It is easy to deal with it, it is enough to use suitable means. They must be applied to the affected areas in a special way in order not only to eliminate, but also to prevent the chance of spreading disputes in the future. You can get rid of this problem even in the most advanced cases, the main thing is to choose the right materials for the fight.

Why mold forms in apartments

Fungal spores that form mold colonies are found in every home or living space. However, they cannot be seen with the naked eye until they begin to actively develop. For the proliferation process to take place, disputes only need to be given favorable conditions for growth and development.

In many homes, they cannot get them, so they are in constant search of such a place, it is important to organize the correct ventilation system and use high-quality materials.

But the opposite situations happen when it spreads at high speed.

The reasons for this development are:

• High humidity and air temperature;
• Low-quality materials;
• Poor processing of wood structures;
• Freezing of the outer walls and the presence of small pores, from where cold air penetrates;
• Lack or improper ventilation;
• Unsanitary conditions in an apartment or house.

One of the listed factors is enough for the disputes to actively develop and destroy the structure.

Conditions for carrying out antifungal treatment

Due to the fact that mold develops quickly, it must be eliminated immediately after the first signs are detected. If this is not done in time, you will have to spend more energy.

Processing takes place:

• At the first signs of plaque or damage to the surface of the walls;
• After elimination of flooding with water or a breakthrough in the sewer system;
• If, after a long stay in the room, the person's condition worsens.

In addition to eliminating mold, preventive measures are often taken to prevent the occurrence of these fungi:

• When carrying out repair work;
• During a thorough cleaning of an apartment or house;
• At the beginning and at the end of the heating season.

To reduce the chance of spreading, some builders recommend that bathroom wall treatments be done once a week. During this event, you can use folk remedies or special disinfectants.

Feature of the composition

The main ingredient in mold removers is fungicides. The main task of this substance is to prevent the occurrence and spread of spores. In addition, some solutions contain an auxiliary element that complements the main one.

Also fungicides are found in primers. There they are found in high quantities, therefore they have a wide spectrum of action. In some cases, for example, during preventive maintenance, substances are used that contain chlorine. It effectively prevents the development of mold fungi, while, due to its low concentration, it is completely safe for humans.

Mold removers on walls and ceilings

For the fight against harmful microorganisms to be effective, it is important not only to buy good materials, but also to treat the surface correctly. The solution has to get into every pore, crevice and crack. Even if inaccessible areas are present, they should be treated. This will prevent the growth of mold.

For processing and preventive work, apply:

• Aerosol dispensers;
• Special impregnations for wood structures;
• Active additives containing antifungal components;
• Deep penetration primers;
• Solutions.

Spray products

Such substances are used for spraying on walls and ceilings, while their surface should be smooth. Allowed to use in places with or without decoration. The application is carried out evenly.

The liquid has no color and is applied with a hand spray to the damaged surface from a distance of about 20-25 cm. Thanks to several spray modes, a person is able to spray the liquid in the form of a jet or dispersion. They can be used during general cleaning or when treating already infected surfaces.

It should be remembered that when using a spray bottle, the user must provide himself with a special protective suit and mask. The solution will penetrate into the body if there is no respiratory protection. After applying the liquid, the room is immediately left for 15-30 minutes. Since the sprayed composition easily penetrates the eyes and on open skin areas, which entails negative consequences.

Antiseptic solutions

Such substances are used in areas that have a wide area of ​​contamination. Use rags and sponges to remove mold. The solution contains substances safe for the body. It is not necessary to use a mask, but a person should have rubber gloves for hands. Thanks to this liquid, even strong pollution is eliminated, only a lot of effort should be made.

Antiseptics can be used in almost any situation, even during or after repairs. The solution is applied to the wall only according to the instructions indicated on the label or included in the kit. Because in some cases, cleaning is required once, and in others 2 or more.

There are also antiseptic solutions for prophylactic purposes. They must be poured into a container and then mixed with water and soap. The concentration of the two components is minimal.

The stores sell broad-spectrum antiseptics. The main advantage of such models is that they effectively eliminate one type of mold.The composition contains fungicides, which in one go can reduce the destructive effects of fungi to zero.

The working fluid is mixed in a bucket or basin. However, this is typical only for antiseptics sold in the form of concentrates. It should also be remembered that you cannot store the ready-made mixture, the leftovers are either poured out or applied to the walls.

Primer benefits

The primer is one of the best methods for fighting mold. The main advantage is deep penetration into walls and ceilings. Fungicides fill even microscopic cracks or holes, which reduces the chance of harmful microorganisms forming. Some substances have a deep penetration effect, but on average the primer fills the pores up to 15 cm, which is enough for most residential walls.

Mold on wood

To eliminate mold fungi on wooden structures, impregnations are used, which contain substances that prevent the growth and development of microorganisms. In addition, such designs provide a good antiseptic effect and act as an excellent means for disinfecting and protecting wood materials. Another advantage of this option is that it does not require constant preventive measures, it is enough to apply the agent to the surface. Protection will last for 5 years.

Application method

Before using impregnation or primers, a person should take preparatory measures. To do this, take any cloth and moisten it with a small amount of antiseptic. The mold is then removed. When the surface is dry, you should start the main work. Best performance is obtained if two coats are applied, but it is important to wait until the primer is completely dry before re-applying.

For wood, it is best to use an impregnation, while applying it to a dry surface that does not have visible traces of mold. It is necessary to impregnate the tree from 2 to 3 times, depending on the depth of the lesion. When the last coat is completely dry, a primer should be used to protect the coating from future negative effects.

Rating of the best cheap funds

CHISTIN Sanitary 3 in 1

A quality concentrate that protects sinks, bathtubs, toilet bowls, ceramic tiles, etc. from mold and corrosive deposits. The tool is completely universal and will fit most solutions. To remove stubborn microbes, let the solution stand for 60 minutes. It is not recommended to use the substance for cleaning stainless steel materials or products that are sensitive to the active ingredient.

Average price: from 60 rubles.

Advantages:

Disadvantages:

Floreal Rapin Mold

An effective product that will quickly prevent the effects of mold. In addition, the composition protects against corrosion and rust formation. The substance does not have a composition harmful to the body, therefore it can be used in a family with children.

Average cost: from 83 rubles.

Advantages:

Disadvantages:

Luscan Economy

A versatile model capable of cleaning the surface from mold, as well as eliminating unpleasant odors. Sold as a gel that is easy to apply and cure for up to 20 minutes. The content of APAS is not more than 5%. Also, the product has a good antibacterial effect.

Sold at a price of 71 rubles.

Advantages:

Disadvantages:

SANELIT Oxygen gel

One of the best products that has hundreds of positive reviews and has earned the trust of buyers. The product copes well with a variety of dirt, not just mold.In addition, citric acid is present in the composition, which is an auxiliary agent and interacts with lime.

Average cost: 85 rubles.

Advantages:

Disadvantages:

Rating of the best models of the middle price segment

Cif spray Power of nature

A popular remedy that contains only natural ingredients. The product perfectly protects the surface and removes traces of mold. It is completely safe for human health due to its hypoallergenic composition. Can be used on acrylic baths.

Average cost: 236 rubles.

Advantages:

Disadvantages:

HG foam to remove fungus

High quality foam spray that removes mold and unpleasant odors. The composition contains a small concentration of chlorine, which helps to effectively clean any surface. Also, the products have a good antibacterial effect and prevent the reoccurrence of molds. It is necessary to spray at a distance of 3-5 cm, after application, let the solution infuse a little and remove with a sponge moistened with water.

Average price: 520 rubles.

Advantages:

Disadvantages:

Mellerud chlorine spray

A quality concentrate capable of removing all types of mold in the home. However, its main feature is performance. It is enough to apply on the affected area, wait no more than 20 minutes and eliminate the solution. The surface will not leave any traces of dirt and will look like new. Also, the product will eliminate unpleasant odors and fill the room with freshness.

Sold at a price: from 470 rubles.

Advantages:

Disadvantages:

Rating of the best premium cleaning products

Kenaz "Anti-mold"

If a person needs to clean the spa bath and remove all dirt from the tiled surface, then this is one of the best remedies. The products are produced in convenient packaging that will allow you to store and transport the product without any problems. The concentrate completely removes mold and mildew and also minimizes bad odor.

Sold at a price: from 1,200 rubles.

Advantages:

Disadvantages:

Glutoclean spray

An effective product that is easy to spray and leaves no residue. The content of KSAV is not more than 5%. It is applied conveniently, the spray gun has three modes, thanks to which the solution is easier to spray.

Sold at a price of 1,020 rubles.

Advantages:

Disadvantages:

Pro-Brite concentrate Septa 100

This concentrate has only recently appeared on the Russian market and is in good demand. The composition is good and does not harm the tile. This is one of the quality options that can remove any contamination in seconds.

Average cost: from 1,000 rubles.

Advantages:

Disadvantages:

FURNITURE CLINIC MOLD REMOVER

A quality product designed to effectively remove mold stains. In addition, it removes all unpleasant odors and fills the room with fresh aroma and cleanliness. The main feature is quick elimination of traces of contamination and convenient packaging.

Sold at a price: from 1,700 rubles.

Advantages:

Disadvantages:

Finally

You can get rid of mold with folk remedies, but professional solutions and concentrates do the best with this. Most of the products can be bought in the cheap price segment, while they have better performance than some expensive models. If you have experience of using the tools described in the rating, or more interesting representatives, tell us about it in the comments.