Best bathroom mold and mildew removers for 2020

Mold in the bathroom not only spoils the look of your home. Fungus on the walls, ceiling, in the seams of tiles is the cause of ailments and health problems, especially young children are prone to complications due to mold. That is why you should get rid of the fungus in the bathroom at the first sign of it. In such a situation, special cleaning agents will come to the rescue of the hostess. Among them, you can find both valid products and useless products that can be toxic to the human body. To facilitate your search, the editors of the site "bestx.htgetrid.com/en/" have prepared a rating of the best remedies for mold and mildew for 2020.

The causes of mold

Mold is a microscopic fungus made up of long filaments. Spores of this fungus are found almost everywhere, including in soil and air. It is not difficult to recognize the fungus - these are gray, dark, white spots on the surfaces of the walls, floor and ceiling. In addition, the room smells damp and musty, with a pronounced degree of moldiness, it becomes impossible to breathe in such a place due to a strong cough.

The reasons for this problem lie in the following:

• High humidity - The bathroom is the best place for mold growth. In such a room, water often pours, condensation forms, and damp things can also be stored there. All this contributes to the rapid spread of colonies.
• Poor ventilation - we have all heard the advice of doctors about regular ventilation. This procedure is necessary to reduce the concentration of harmful microorganisms in the air. If there is no good ventilation in the bathroom, it is impossible to completely remove all the steam from there after washing, and the lack of air flow will not allow the fungus spores to disappear.
• Artificial light - mold cannot tolerate sunlight. In the bathroom and in similar rooms, windows are rarely installed, especially in apartment buildings.
• Hard-to-reach places - High room temperatures and damp air contribute to cracks and leaks in the bathroom. Hard-to-reach areas are difficult to thoroughly rinse and process, respectively, the fungus feels quite comfortable there.
• Temperature changes also affect the spread of spores. Mold grows especially actively in high temperature conditions.
• Low-quality plumbing - leaking pipes only increase the humidity in the room and help the fungus develop.

Danger of mold

During breathing, mold spores enter our lungs, from there they are absorbed into the bloodstream and spread to all organs and tissues. Also, fungal spores get to the surface of the skin and penetrate through it into the body. Constant contact with these colonies leads to the appearance of such health problems as:

• migraine;
• allergic reactions, especially in childhood;
• bronchial asthma - also often develops in children;
• sinusitis;
• mycosis - a fungal disease that affects all human organs;
• pathology from the digestive tract;
• pathology of the liver, kidneys;
• diseases of the musculoskeletal system;
• also fungal toxins can cause poisoning, manifested by nausea and vomiting.

Also, special attention should be paid to mold in the house by women in position. Indoor pregnancy and fungus are incompatible. The body of a woman during the period of bearing a child is much more susceptible to poisoning, moreover, in such a situation, the fetus may suffer.

How to get rid of

You shouldn't run this problem if you don't want to get complications. Modern opportunities allow you to get rid of the fungus even in the most advanced cases. So how should you proceed?

1. Before starting any procedure, you should wear a medical mask on your face and rubber gloves on your hands.
2. Clean contaminated areas with special products. In this case, both industrial products and folk methods are suitable.
3. Rinse the surface thoroughly, paying special attention to the seams between the tiles, even a slight residue of spores and colonies can lead to a recurrence of mold.
4. After the procedure, you should ventilate and dry the bathroom. In the first few hours, it is not recommended to use plumbing and washing machine. It is best to treat the bath overnight.
5. If there are problems with pipes and exhaust, they need to be fixed.
6. Also, don't forget about regular prophylaxis. It includes treating the bathroom with antifungal agents, regular cleaning and thorough drying of the room.

Below you can find the best professional remedies for mold in the bathroom. The top is based on real customer reviews.

Rating of the best products for mold and mildew for 2020

Antifungal

A very high quality product suitable for removing mold and mildew in all rooms, including the bathroom. Suitable even in the most advanced cases. Also, this drug is used in health care institutions, such a product is especially in demand in tuberculosis hospitals.

One of the conveniences of the tool is the ability to use it in any convenient way - you can irrigate the damaged surface, wipe it with a rag. Also, the product is admissible for use as preventive measures and disinfection. The manufacturer recommends using Antifungal during renovation work to prevent the formation of mold as a result of further use of the premises.

Recommendations for use: the treatment of premises should be carried out strictly with gloves, the agent should be diluted in water in accordance with the instructions, the most contaminated areas should be cleaned with undiluted product.

Advantages:

Disadvantages:

The average cost is 230 Russian rubles.

Monomakh

And yet another versatile product that ideally removes mold and other microorganisms from surfaces. This preparation is not recommended for use on metal materials and products made of propylene. The product is dissolved with water or various building mixtures. Treatment of premises during repairs with an antifungal product will protect your home from the appearance of mold and mildew in the future.

How to apply? As mentioned above, the agent must be diluted with a solvent for better adhesion to the surface. The surface to be treated should be thoroughly cleaned of irregularities and roughness. If such defects are not eliminated, fungal spores will start in them over time. The room should be processed 1-3 times for a sustainable result.

Advantages:

Disadvantages:

The average cost is 600 Russian rubles.

Dali

If you are afraid for the health of your children and pets, we recommend that you pay attention to this universal remedy. Like most products, it can be diluted in building mixes and in water.Scope of application - destruction of spores of fungi, algae, mosses, antiseptic for the prevention of infections and disinfection.

When the product evaporates, toxic substances are not released, people with chlorine allergy will also find this product very useful, since this component is not contained in the product. Despite the safety of the product, handling should be carried out with rubber gloves and protective clothing.

Advantages:

Disadvantages:

The average cost is 600 Russian rubles.

BON Anti-mold and mildew agent

If you want a simpler cleaner for basic cleaning, take a look at this tile and tile joint cleaner. The product is quite effective, it is able to cope with old mold stains even in the most advanced cases. The product is safe for use in the kitchen, it leaves behind a pleasant smell of freshness and cleanliness.

Also, the product is suitable for routine hygienic cleaning, as well as for disinfection and antiseptic surfaces. Convenient form of release in the form of a spray will allow processing even in hard-to-reach areas.

Advantages:

Disadvantages:

The average cost is 155 Russian rubles.

Isocide

Another multifunctional tool that allows you to permanently save the user from fungus, mold and other similar troubles.

The product is made from safe substances, it does not contain volatile, toxic components, chlorine is also not included in the composition. This product is recommended for use in apartments where children and people prone to allergies live.

The advantages of using Isocid include its long-term effect - if the drug is not washed off with water after use, mold and fungus will not bother you for another 10 years. Agree, an advantageous offer. The tool can be used not only in the bathroom, it can be used for processing in residential premises and industrial facilities. It also removes unpleasant odors. If you are making repairs, you can safely use this product. It does not in any way affect the finishing work and does not damage building materials.

Advantages:

Disadvantages:

The average cost is 290 Russian rubles.

MILKILL antifungal primer

UniversallyThis product is perfect for the bathroom. This product is used to isolate frequently leaking places. The emulsion consists of safe ingredients and antifungal agents. The composition of the product allows you to use it during repair work, the application of a primer will not affect further construction activities.

The emulsion does not need to be diluted with water, but it is allowed to add it to paint, glue and other substances. Surface treatment with this drug must be carried out using a paint brush or roller. The surfaces are ready for further work in 24 hours. The primer coats the walls with a protective layer that allows the house to breathe without being saturated with moisture.

All production materials are made in Germany, high quality raw materials and comply with safety certificates.

Advantages:

Disadvantages:

The average cost is 1,000 Russian rubles.

Hydrotex

If there is no mold in your house yet, you can protect yourself with this waterproofing. The mastic dries quickly, allows you to quickly and reliably eliminate leaks in the house.

The consistency of the product is a dry mixture, it should be diluted with water in a ratio of 400 g of product: 60 ml of water. Stir the solution thoroughly until thick. Form a ball, apply mastic to problem areas with a spatula. The mastic dries quickly enough, but it is recommended to wait 12 hours for the full effect.

Advantages:

Disadvantages:

The average cost is 1,100 Russian rubles.

HG spray for removing mold and mildew

A versatile product that destroys mold in the house, as well as fungi, algae and other microorganisms. In addition, the product perfectly removes mold stains and disinfects surfaces. The effect of using the product is noticeable immediately after use.

The disadvantages of the product include the chlorine content in the composition. First, such an ingredient leaves an unpleasant odor. Secondly, many people, especially children, cannot tolerate such a component.

Advantages:

Disadvantages:

The average cost is 340 Russian rubles.

Remember, these industrial antimicrobial products should be stored in a dark place, protected from sunlight. Never allow children to access these products. If drugs get on the surface of the skin, they should be thoroughly washed off; if they get on the mucous membranes, the agent should be rinsed with running water and consult a doctor.

Folk ways

Such methods are often in no way inferior to industrial drugs, and are much cheaper.

Table vinegar

An excellent method for the destruction of fungi and microorganisms. For this method, you need to take 9% vinegar and mix it with water in a 50:50 ratio. Wipe problem areas with the resulting mixture. Vinegar does a good job of removing mold in tile joints and chips.

Baking soda

This tool has long been known for its versatility. Soda has an excellent antiseptic effect; a soap-soda solution is often recommended for disinfecting surfaces in a house where there is an infected patient. Soda can also disinfect children's dishes, so using such a product to combat mold will be a safe way. The abrasive particles of the product will not only eliminate mold but also clean the contaminated area.

How to apply? Mix baking soda with vinegar. This mixture will give a reaction, during which a lot of foam will be released. This foam should be used to rinse problem areas. After processing, the soda must be washed off with clean running water so that white stains do not form.

Tea tree oil

This is the best natural antiseptic. Tea tree oil has long been known for its medicinal and disinfecting properties. Moreover, this product has a pleasant smell and does not emit toxic substances.

Recommendations for use: Mix 2 tablespoons of essential oil with 0.5 l of water, mix thoroughly and pour into a spray bottle. Then spray the mixture onto the contaminated area. The advantages of the method include the fact that you do not need to wash off the oil. But it is impossible to apply the product on paper surfaces - greasy stains will remain.

Hydrogen peroxide

And one more effective and long-term way. Peroxide can disinfect a bathroom and remove fungal stains in minutes.

How to prepare: Mix 100 g of boric acid with 200 ml of hydrogen peroxide. Then add 200 ml of vinegar. Dilute the resulting mixture with 0.5 l of water. After the ingredients are completely dissolved in the solution, dip a sponge and rinse all soiled areas with it.

If you had experience using the products described in the rating, write your feedback in the comments.