Best Scotchlocks for 2020

To connect finely conductive conductors, special connecting elements - Scotchlok are used. With their help, fixation is carried out by compression in contact like a knife version. The dielectric housing makes it possible to provide a reliable isolated connection. The body is made of polypropylene, high temperature resistant nylon or other elements. The moisture-repelling effect allows for a hydrophobic gel inside the device. This filling can significantly improve the practicality and ergonomics of the insulation of contacts. Certain types of tape can create a branching connection without removing or breaking the line. This connection is called "parallelism". In order to more accurately and thoroughly understand the differences between such products, the editors of the site "bestx.htgetrid.com/en/" have prepared for you an overview of popular and popular adhesive tape for 2020.

Connector types

The standard insulating tape is a docking connector made of high quality plastic or plastic. The main working part of the adhesive tape will be the connecting contacts. Scotchlocks simultaneously provide a high level of wire insulation and significantly increase the reliability of the connection. A soldering iron is absolutely not needed for the installation of electrical networks. This product can be used with copper wires or rolled, as well as polymer coated wires. Scotchlocks according to their design features are divided into the following types:

• Dead end;
• Checkpoints;
• T-shaped.

They are used to connect small or large cross-sections. Pass-through versions of models include U1b products for conductive conductors with a diameter of 09-1.3 mm. Their insulation diameter parameter is up to 3.18 mm. The pass-through group of scotchlocks is used for mounting elements with a small section. The parameter of the cores can be 0.4-0.9 mm, they are marked UY-2. The dimensions of this hole allow you to connect wires with an outer insulation diameter of 2.88 mm. Dead-end models are intended for installation work with outlets of conductors with a cross section of 0.5-1.55 mm.

Scope of application

Scotchlocks are a popular simple device used by computer and telephone installers to connect LEDs or other low-current lines. Many people use adhesive tape to connect low-voltage car wiring elements. To work with such products, only pliers are required. To connect several cables together, you need to prepare them, tuck them into an adhesive tape, and then put a cap on top and clamp them with pliers. It is not recommended to make much effort in this case, since the main task in this case is to connect the wires, and not break the tape. The connection of power wires is most often fixed with other clamps.

Rating of the best scotchlocks for 2020

In order to get acquainted with these reliable and useful helpers in more detail, the editors of the site "bestx.htgetrid.com/en/" have prepared a short review, which highlights all the advantages and disadvantages of each of the models.

Checkpoints

Scotchlok ЗМ 562 with cut-out contact

The American manufacturer of consumables offers consumers high quality, durable adhesive tape. With its help, you can quickly and conveniently perform all the required work with electrical contacts. The connection is made by installing the power wire to the main one, after which the contacts are isolated in automatic mode. A closed spring connection is made by dipping the U-shaped contact into the bore of the connector. There is no need to insulate the wires to be connected. The maximum working temperature is 90 degrees. The material for the manufacture of adhesive tape was polypropylene. The product is characterized by increased fire resistance. The diameter of the wires is 2.5-4 mm. The package contains 6 pcs. The cost of one product is 25 rubles.

Advantages:

Disadvantages:

3M Scotchlok ™ UDW2

This connection piece is designed to securely and firmly attach a pair of distribution cable conductors, made of copper or steel, covered with copper, with a core diameter of 0.9-1.3 mm. The body of the product is made of UV-resistant plastic. The hydrophobic filler prevents moisture from entering the contacts. The manufacturer indicates the service life of such a mount - within 40 years. The UDW2 connectors will be crimped using an E9BM crimping tool. The cost of the product is 151 rubles.

Advantages:

Disadvantages:

Dead end

Corning Scotchlok UR2 80611327596 26-19AWG

A quick fastener for red wires from an American manufacturer is used not only by amateurs in electronics, but also by professionals. Scotchlock from this manufacturer is suitable for performing direct and branched connection of conductors of cables with a diameter of 0.4-0.9 mm. The conductor size is 26x19 mm. The manufacturer guarantees the quality of the connector for 40 years. During this period, the protective gel will lose its characteristics, so the device should be replaced with a new one. The maximum operating voltage of the device is 600 V, and the maximum operating temperature is 60 degrees. The insulating layer is displaced and the conductor is fixed by rigid, elastic compression. Durability and reliability of the connection can be ensured by performing only one movement. The package contains scotchlocks, an amount equal to 100 pcs. You can buy a product in domestic stores or on the Internet for 903 rubles.

Advantages:

Disadvantages:

Hyperline UY-2

The electrical connectors of this American manufacturer are equipped with a displacement contact. They are specially made for connection or attachment of the power type wire to the main analog, as well as for insulating the attachment point. The devices are recommended for use with copper power wires or cables, single-wire, multi-wire, rigid and flexible elements. No stripping or soldering is required when using the fixture. The product is equipped with a spring-loaded blade contact, with the help of which it is convenient to cut through the insulation and embed conductors into copper with one click. After that, the device cover snaps into place, keeping the contact in the conductors.The use of this device makes it possible to ensure the tightness of the contact zone, since this method promotes diffusion, which eventually leads to “cold welding of contacts and wires. The body is made of polypropylene. Its resistance to solvents and chemicals is at a high level. The blade contact is made of tinned brass, which is corrosion resistant. The connectors are mounted using conventional pliers. Wire cross-section –2.5-4 mm. The maximum temperature regime is 90 degrees, and the nominal voltage is 600 V. The package contains 100 pieces. The cost of the product is 657 rubles.

Advantages:

Disadvantages:

Rexant 07-5401

This device from a Chinese manufacturer is designed to connect wires to each other. There is a contact plate inside the device, which, when you press a certain button, thinly cuts the wires, connecting them together. After crimping, the contacts are protected with a water-repellent gel. This makes it possible to increase the parameters of reliability, durability and quality of the connection. Scotchlock is suitable for connecting wires with a diameter of 0.4-0.7 mm. Package dimensions are equal to 14x10.5x1.8 cm. The set contains 100 pcs. The cost of the product is 360 rubles.

Advantages:

Disadvantages:

ATcom AT7329

This Chinese manufacturer offers the domestic consumer high-quality, inexpensive mounting accessories. Among them there are also connectors, one of which is AT7329. Its main purpose is the splicing of cores of TP type cables with a diameter of 0.4-0.9 mm. The type of insulation does not matter. The device is filled with a hydrophobic gel, which guarantees reliable protection of contacts from moisture penetration. The color of the product can be orange or transparent. Inside there is a contact plate, which, when you press the button, cuts the wires and connects them together. The water-repellent gel provides reliable protection for the joint. The kit contains 100 pcs. connectors. The cost of the product is 205 rubles.

Advantages:

Disadvantages:

Netlan scotchlok

A Chinese manufacturing plant offers high-quality adhesive tape to the domestic market. These attachments are recommended for efficient splice and branching of wires or cables. They are used in building telephony. Scotchlock from this manufacturer is very effective when connecting 2 conductors with the same or different diameter. When using this device, no removal from the wires is required. The hydrophobic gel protects the wires from moisture penetration and oxidation. The material of the contact part is brass, and the body is made of polyethylene. Double mortise element provides reliable contact, excellent transfer characteristics. You can store the scotchlock at a temperature of -40 to +70 degrees. The size of the package is 10x9x2 cm. The kit contains 100 gaskets. The cost of the product is 214 rubles.

Advantages:

Disadvantages:

TWT-SLC-UY2

The use of connectors of this type will make it possible to quickly, easily and efficiently connect 2 electric wires, make a branch or parallel wires without stripping the insulating layer.This adhesive tape in its design has a U-shaped contact, which easily cuts through the insulation. With this device it is possible to connect conductors of different cross-sections. Such connectors are used mainly in telephony or telecommunications, where it is required to quickly and accurately branch off the wire. It is worth connecting copper conductors with a diameter of 0.4-0.9 mm. The connector body is filled with a hydrophobic gel. The range of permissible temperature conditions is -30– + 70 degrees. The package contains 100 pcs. The cost of the product is 273 rubles.

Advantages:

Disadvantages:

T-shaped

Rexant IP67 07-5909-8

This compact, watertight cable connector is specially designed for easy, convenient and fast work with conductors. It is distinguished by an increased level of protection from external environmental factors. This connector is used for arranging a personal plot, installing lighting for park or street paths, lighting special recreation areas, decorating decorative ponds, ensuring the stable functioning of irrigation and automatic devices. With the help of this adhesive tape, video cameras located on the street, automatic gates, video intercoms are connected.

High-quality materials used for the manufacture of O-rings, and resistant to mechanical damage plastic perfectly protects the contacts, ensuring ergonomic use in conditions associated with high humidity and dust. The compactness of the product makes it possible to use the device in conditions with limited space. The device has an IP67 protection rating. Working temperature: from -25 to +85 degrees. The product can be purchased for 704 rubles.

Advantages:

Disadvantages:

FreeTools Scotchlock

When it is necessary to ensure tightness and protection of the cable, this T-shaped adhesive tape will be an indispensable tool for many professionals. It is used to provide protection for electrical connections in street lamps, industrial electrical installations, and transport. Such devices have a high level of protection, so they can be used even for connecting elements located under water or underground, without the threat of losing the quality of the connection. The compactness of the device allows installing these adhesive tape in small-sized systems. The material for the production was polyamide. The operating temperature is from -40 to +85 degrees. The cost of the product is 588 rubles.

Advantages:

Disadvantages:

We've covered the most popular wire connectors for 2020. If you have experience using the scotchlocks described in the rating, or more interesting models, tell us about it in the comments.