Best siphons for 2020

Today it is easy to buy a siphon for the kitchen or bathroom. It is enough to open a page in an online store or go to a construction hypermarket. Another problem is finding a suitable option. After all, it can be difficult to choose a worthy representative among thousands of models. Especially if a person does not have basic knowledge about a particular product. Therefore, the editors of the site "bestx.htgetrid.com/en/" have prepared for you a rating of the best siphons for 2020.

Varieties of the siphon by the way of functioning

Most of the products can be divided into three main groups, where each category will differ in how it works.

Automatic

Products of this type are sold in two variations: click-clack or equipped with a special handle. The first option is a special cover that is fixed on a small pin and prevents liquid from entering the pipe. If there is a lot of accumulated water, then the pressure acts on this element and a gap is formed, which drains the excess. This option is preferable to install in the bathroom when a person turns on the tap and does not have time to come on time. Automatic models prevent flooding and save money.

The handle version is operated thanks to a special cable that is placed on the lid. If the handle rotates, the product rises or falls. Depending on the requirements of the owner. The system is convenient because it makes it possible to monitor the flow of draining water.

Semi-automatic

Such models operate according to the principle of the previous version, the only difference is that physical impact is required for functioning. Thanks to the pin with which they are equipped, with a single press, the drain element is pressed, which allows you to draw water to the desired level, a double press prevents this process and facilitates the drainage of the liquid.

Manual

These are the simplest products that have been used since ancient times. The structure consists of a connection of pipes through which water is drained. In order for the device to start functioning, it is necessary to lift the lid, then the drain hole will open, and the liquid level will gradually decrease.

Difference in material

It is imperative to know the material from which the product is made. This is the only way the user can determine the reliability and durability of the element. The siphon can be made from:

• Polymeric substances;
• Metal (cast iron, copper, brass).

The advantage of plastic models is low weight, affordable price, and high resistance to the corrosion process. Such products have appeared recently and for several years have almost completely replaced metal representatives into the background. In addition, these are universal siphons that can be used for each type of sewage system, which allows you to create unusual design solutions. The only drawback is a short service life, especially if the material is subjected to constant pressure.

Cast iron products appeared earlier than anyone else and were in wide demand, due to their high operational life. In addition, such a design is able to withstand any pressure and not leak. But this is not all, since the cast-iron siphon is resistant to high temperatures and resistance to aggressive environments, its use is relevant in the 21st century. A product made of this material does not lend itself to deformation. But it is important to understand that the products are intended only for installation in the bathroom, therefore they are not very versatile.

Copper and brass are excellent materials that will decorate the bathroom and give it an aesthetic look. In addition, copper siphons have a long service life, which can exceed 50 years. They are also not afraid of the aggressive effects of corrosion and do not accumulate debris inside the structure. The only drawback is the high cost (some models are sold over 20,000 rubles), while they can only be placed in the bathroom.

Which siphons are suitable for the kitchen and shower?

As soon as a person decides on the material and feature of the work, it is necessary to choose the shape of the structure. Today, products are sold that are made in various variations, but the most popular:

• Bottle - are a standard design, where, in addition to pipes, there is a special flask. The models are sold in two types: with a pipe or with two baffles. The choice must be made based on the recommendations of the plumber.
• Pipe options are the most common. Sold in the form of a curved tube that has two bends. Configurations can be S or U, depending on the model.
• Corrugated pipes are a separate category of pipe representatives. The advantage of this option is that it can accept any configuration. In addition, models are sold where there are sockets, which make it possible to connect additional equipment.
• For shower cabins it is recommended to use a drain-drain.
• The flat models are compact and suitable for installation in kitchens where a double sink is used.

When a person chooses a model for home use, most professionals recommend using only a bottle siphon. This decision is due to the fact that particles of dirt and grease will be retained in a special glass and prevent the sewer from clogging. And due to the fact that the lower part of this device can be easily removed, the user will be able to clean it in a timely manner.

Tubular products are suitable for arranging a bathroom. However, it is important to understand that such a structure is difficult to clean, therefore it is prohibited to drain dirty liquid with large particles of debris. Better to use the toilet for such cases.

When dishwashers or washing appliances are used in the kitchen, it is better to buy the option with an overflow, where additional drain holes are provided. This way the equipment will work properly and the risk of leakage will be reduced.

The drain ladder is a separate equipment designed to arrange a drain directly in the floor. The main difference between such a system is the height, which can be either 8 cm or 20 centimeters. Most plumbers recommend using lower value products.

Differences can be in the type of design. So it is customary to distinguish between horizontal and vertical systems. If it is necessary to run the pipe directly into the floor, then it is recommended to use the second option, since it has a good flow capacity and eliminates the formation of blockages. The advantage of horizontal systems is their versatility. That is, such a siphon is installed in any room, while showing good results. The only thing that is important to understand is that the sewage system should be placed at a slight slope.

If a person has a small space under the sink, then it is best to pay attention to the purchase of corrugated or flat systems. They are able to adapt to every design.But it is important to understand that their use can be accompanied by the release of an unpleasant odor from the drain hole, since the resulting bend will not differ in great length.

What is important to consider when choosing?

Before buying a siphon, a person needs to pay attention to finding the optimal diameter of the nozzle. It is best to install wide products because the user will spend less time cleaning and will also increase the service life.

Help from a plumber will not be superfluous. Not all people can understand plumbing systems, so when buying a siphon, you should contact a plumber you know or just hire an independent expert who will help you choose the best product for a low price. It is worth paying the removal to the gasket material, it is preferable to use rubber products, since they are more durable than plastic ones.

How the siphon works

Regardless of the brand or design chosen, most of the siphons function on the principle of communicating vessels. That is, the product provides for the presence of two nozzles, one is located above and the other below. The first is called inlet, and the second is drain. Based on the names, it's easy to guess what they are doing.

There is a separate section between the pipes, where there is always liquid. This place is usually called a water plug (another name is a water seal). The main function is to prevent odors from entering the apartment from the sewer. In addition, large debris gets into this part, which remains there without clogging the sewer.

The situation is different in flat models or corrugated pipes with a slight bend. The formed odor trap can evaporate if the person does not turn on the water. This is especially noticeable when the owners go on vacation, and upon arrival, they discover the smell of sewage in their home.

Rating of the best models of siphons for the kitchen

VIRPlast Mini Elite

An excellent model for under-sink installation. A bottle-type design is used. For convenience, height adjustment is provided, so a person is able to independently determine the value of the device. Connection diameter - 50, 40 mm. It is made of high quality plastic, which shows high resistance to mechanical stress.

Sold at a price of 265 rubles.

Advantages:

Disadvantages:

WIRQUIN Espace

A more expensive model that fits under the sink. Made of durable materials that can withstand high pressure and will not deteriorate over time. The connection diameter is 40 mm. The odor trap prevents coarse dirt particles from entering the drain and does not spread odors. A quick release system is provided for easier maintenance.

The average price is 1,190 rubles.

Advantages:

Disadvantages:

viega 5755 366 681

A beautiful bottle-type siphon that is designed to be placed under the sink. There is a height adjustment, which allows you to adjust the equipment to specific dimensions. In addition to a siphon and a water seal, the package contains a plug, a socket, a pipe, etc. This simplifies installation at times. The connection diameter is 32 mm. Sold in silver color.

The average price is 1,500 rubles.

Advantages:

Disadvantages:

McALPINE MRSK4

A budget option that copes with its task 100% and minimizes the chance of congestion. It is made of plastic, the design of the equipment is pipe (knee), which is suitable for most sinks. The declared service life is 3600 days.

The average price is 399 rubles.

Advantages:

Disadvantages:

Top 4 bathroom siphons

McALPINE MRSK2

The classic version, which is designed for installation in the bathroom. It is a bottle-type product. Made of durable plastic that can withstand light loads. Sold in white. Connection diameter - 40 mm.

The average price is 230 rubles.

Advantages:

Disadvantages:

AlcaPLAST A55KM

A quality product with a secure lid closing system. The smooth inner surface will prevent dirt build-up and blockages. Execution type - pipe. Connection diameter - 50 mm. Made of polypropylene and stainless steel.

The average price is 1,800 rubles.

Advantages:

Disadvantages:

viega Simplex 6168.46 595 678

An expensive model, designed not only to ensure the correct organization of the drain, but also to decorate the bathroom. Connection diameters - 50 and 40 mm, which is a universal solution. Products are made of plastic and stainless steel, which increases performance significantly. Sold in silver color.

The average cost is 3,225 rubles.

Advantages:

Disadvantages:

ANI Plast E155

A classic budget option that will fit most baths. The design of the siphon is pipe, which is a positive point. The connection diameter is 70 mm, which ensures a high-quality throughput.

The average cost is 350 rubles.

Advantages:

Disadvantages:

Rating of quality shower siphons

viega Tempoplex 6956EX 364 786

One of the best classic siphons. Made of plastic and stainless steel. Therefore, the products will retain their original properties even after several years of active operation. Connection diameter - 50 mm. The kit includes a siphon and a water seal.

The average price is 1,600 rubles.

Advantages:

Disadvantages:

AlcaPLAST A491CR

A good option that is suitable for installation under a shower tray. Made of plastic and polypropylene. Thanks to the smooth inner walls, debris will not linger inside and will not form a blockage. The appearance of the product is classic.

The average price is 923 rubles.

Advantages:

Disadvantages:

Unicorn G410H

A budget siphon that fits into the shower tray. The product is made of high quality elements that will last for decades and will not break from frequent use. Connection diameter - 65 mm, drain - 40 mm.

The average price is 445 rubles.

Advantages:

Disadvantages:

Finally

A siphon is an important tool, without it it will not be possible to organize a normal drainage system, therefore, special attention is paid to its choice. If you have experience using the products described in the rating, or more interesting siphons, tell us about it in the comments.