👌 Best syringe pumps (dispensers) for 2020

An infusomat is called a syringe pump, with the help of which nutrients are introduced into the human or animal body. The design and principle of operation are quite simple, which makes it possible to use it even for novice doctors. The main advantage of the device is the high accuracy of drug administration, and besides this, it is safe for the patient. However, before buying a device, it is important to know the basic technical characteristics in order to choose a high-quality option that will last for a long time.

The editors of the site "bestx.htgetrid.com/en/" have prepared for you a rating of the best syringe pumps (dispensers) for 2020.

Where is it poured in and how is the medicine given

With the development of electronics, it has become easier for healthcare professionals to treat and care for patients. Thanks to the infusion pump, you can safely infuse the necessary components into the body of an animal or human. There are 4 ways of infusion:

• Arterial;
• Delivery of the drug directly through the alimentary tract;
• Intravenous infusion;
• The spine.

In addition, you should know about the methods of administration of the solution, there are not so many of them, only 3:

• Rapid vein infusion, called bolus;
• Volume;
• The last option is designed for slow flow - drip.

With the help of the device, the doctor independently sets the operating mode, which improves the effectiveness of the medicine. Some companies produce drugs that are able to automatically adjust the required dosage, which is very convenient. The main thing is to set the parameters of the human body and choose a diagnosis.

The main advantage of the product over standard droppers is the ability to carry out several procedures at the same time. 2-3 drugs are poured into the body of a person, while a certain sequence is set and the required speed is indicated.

If the syringe is incorrectly installed or the needle disconnects, and the solution runs out, the device will begin to emit loud signals. This will allow the doctor to quickly notice the problem and correct it without harm to the patient.

Main features of the syringe pump

The main purpose of the device is to administer a drug or saline solution inside a person bypassing the gastrointestinal tract.

The design has one or more syringe holders. Their number depends on the type of model used. Most often, they buy standard versions designed for one syringe. The movement of the solution through the tubes is carried out using a pump that operates at a certain speed. Also, the structure has a special screen where the following information is displayed:

• Solution feed rate;
• What is the volume of the syringe used;
• Power type, today universal models are sold that can operate on an electrical network or batteries;
• Introduction progress report;
• Alert.

Most of the devices are compact, which makes it easy to transport them to any site.Also, some dispensers are used in resuscitation vehicles, only it is important to make sure that the model supports charging from the on-board network so that there are no problems.

As soon as the syringe is changed, the pump is disconnected from the patient. The doctor fills a new syringe with solution and replaces it. Then the equipment is reconnected and the drug is injected.

What is special about volumetric pumps

Unlike the perfuser, the design here is slightly different. It is more complicated and requires certain knowledge in handling. In order to inject a medical product, not syringes are required, but special vials or containers, their volume is selected based on the purposes and type of the drug. The advantage of this design is that the entire operation is performed in one go, no breaks are required for changing the syringe.

The principle of operation is not the same as that of the previous model. All movement is based on special rollers that clamp the line with the solution. Thanks to this, the drug begins to move forward. The medicine comes into contact exclusively with the inside of the tube, nothing superfluous will enter the body.

Another positive side of the device is its high safety in case of power outages. Even without it, the device will be able to work in emergency mode for some time, which will maintain safety for human life.

Today, devices are produced that are capable of functioning in one of three modes of operation:

• Controlled, connects when the patient requires pain relievers. At the same time, he conducts the launch without the help of a doctor.
• The continuous type is used only in cases where a long-term infusion of saline solution is required, which is necessary to maintain a person's vital functions. It is used if the patient is in a coma or is unable to eat independently.
• The periodic mode differs in that the control of drug administration is carried out automatically after set time periods. This is convenient, since the doctor does not need to constantly sit near the patient and monitor the administration of the solution.

Where the dispenser can be used

Due to the fact that the equipment provides accurate administration of medications into the body, while the frequency can be controlled, the scope of the device is wide.

The dropper does not give such a result, while it is impossible to make sure that the infusion rate remains at a certain level. Also, when using a standard product, you cannot expect an accurate dosage from it. Therefore, most modern hospitals are equipped with a dispenser.

Most often the equipment is used:

• When rescuing animals. For example, with gastritis, when the pet does not eat or drink water;
• In surgical operations, a syringe pump is used to administer anesthesia;
• Also, the device is used in oncology departments;
• The device is often found in ambulances;
• In narcological departments, equipment is necessary to remove harmful substances from the patient's body;
• The product is also actively used in nursing premature babies.

The advantage of using the device is its safety for the body, since the risk of side effects or complications is reduced. But most doctors like the device due to the fact that it is possible to independently regulate the rate of delivery of the medical solution. Thanks to the built-in notification system, the medical staff will always hear the sound of the device and will come to the rescue in time, which will help to avoid unforeseen circumstances.

Syringe pump system

In some cases, the use of one syringe may not be enough and the patient will need complex therapy. To ensure the possibility of simultaneous infusion of several drugs, special equipment is used.

The difference between the device is that it combines several products at once into one station. In this case, the connection is carried out through one electric cable, which saves sockets and does not require an additional extension cord.Several tubes are connected to the patient at once, which inject various medications. The dosage and rate of admission may vary.

The advantages of the dispenser system include:

• Does not take up space, all syringes can fit on one table;
• Easy connection makes it easy to move long distances or around the hospital;
• The doctor can independently set certain programs and dosage regimens;
• The patient's condition is monitored through one display, which is convenient if 3-4 syringes are connected.

Rating of the best budget models

SinoMDT SN-50С6

A reliable device that allows infusion of medicines at any speed. The main feature is that it is able to automatically determine the characteristics of the elements used for drug administration. The product is distinguished by high accuracy and reliability.

If desired, the user can set one of three alarm levels, which will allow you to hear the squeak almost anywhere. Safety is ensured by automatically stopping the pipette if an occlusion occurs, which is a convenient solution. The product is used in the treatment of humans, but is also suitable for administering the solution to animals.

The average cost is 33,000 rubles.

Advantages:

Disadvantages:

Armed LINZ-8A

A reliable device from a Russian manufacturer, which is suitable for use in various hospitals. The device allows you to inject the product with professional precision, which is perfect for infusion treatment. A distinctive feature of the product is the ability to automatically perform some operations. The user-friendly control panel provides easy setup.

The syringe pump is suitable for handling cells up to 60 ml. The dispenser operates completely from the mains, but when the power is turned off, the built-in battery will allow you to safely end the medication process. If the medical staff incorrectly install the syringe or any error occurs, the equipment will immediately respond to this.

The average cost is 43,000 rubles.

Advantages:

Disadvantages:

TOP-4 popular devices of the middle price segment

SK-500 I Mindray

Reliable equipment, which is characterized by a low injection rate, which makes it possible to use even 5 ml syringes. The dispenser is made of durable material, the front panel contains the main modes, as well as their purpose. Even a person without medical education can figure out how the device works.

The syringe pump is suitable for both adults and newborns, making it a versatile tool. The unique system prevents the introduction of large occlusions, which allows for a safer infusion of the solution. The device operates on a standard 220 V. The weight of the structure is 3 kg, which makes it easy to move from one place to another.

The average cost is 85,000 rubles.

Advantages:

Disadvantages:

SP-8800

A high-quality Korean-made device that will allow you to inject any medical solutions. The device is suitable for various applications, which makes it versatile. The minimum syringe is 10 ml, the maximum is 50 ml. The intuitive interface provides simple operation. All necessary settings are supported, which makes it possible to use the equipment for different patients.

For greater safety, there is a built-in battery inside the structure, which can work for 3 hours without interruption.But it only works in emergency situations when the power supply is cut off. The product warranty lasts only one year. The recommended air humidity is up to 90%, while there should be no condition. The mass of the device is 2 kg.

The average cost is 70,000 rubles.

Advantages:

Disadvantages:

IP-7700

Compact model for high precision infusion throughout the entire procedure. To improve the efficiency of the equipment, the manufacturer installed a dual microcontroller. The reliability of the device is at a high level, which is also an advantage. There is a system of sound and signal alerts that are triggered when an emergency occurs.

The outer shell is made from a durable material that keeps the inner components safe. A convenient display accurately conveys information and allows you to monitor the progress of the injection of a medical product The maximum flow rate is 1000 ml per hour. Power consumption - 15 watts.

The average cost is 60,000 rubles.

Advantages:

Disadvantages:

TE-311/312 TERUMO

One of the best options that guarantees uninterrupted operation throughout the entire period of operation. An informative display shows current readings for easy monitoring. The housing is equipped with splash protection for increased reliability. The dispenser can hold syringes from 10 ml. A convenient dial is used to select the speed.

If the battery breaks or runs out of charge, it can be replaced in a few steps. The maximum infusion rate is 300 ml per hour. If a syringe with a volume of 50 ml is used, then the parameter increases by 4 times.

Sold at a price of 60,000 rubles.

Advantages:

Disadvantages:

TOP popular premium dispensers

SP 500 JMS

A quality model that is equipped with a strain gauge sensor. High reliability is ensured by two processors. Thanks to the unusual mechanism, the installation of the syringe takes a minimum of time. In addition, the manufacturer guarantees that the pump can function not only with branded syringes, but also Russian-made.

Sold at a price: from 85,000 rubles.

Advantages:

Disadvantages:

Aitecs 2016

One of the most expensive and effective devices suitable for private and public clinics. The product is capable of operating in several modes, which ensures high insertion accuracy and guarantees safety. There is an event log that records up to 2000 readings. With the introduction of the drug at a rate of 5 ml per hour, the battery life will be 10 hours, which is a good result.

The average price is 139,000 rubles.

Advantages:

Disadvantages:

If you have experience using the dispensers described in the rating, or more interesting models, tell us about it in the comments.