👍Best high pressure hoses for 2020

To prevent water from damaging the hose, especially when pumping fluid under high pressure, special piping should be used. Most often, such structures are installed in places where it is not possible to connect metal products. Outwardly, the device resembles a regular hose, but its rigidity is many times better. For the correct choice, it is important to know some technical nuances and varieties. This will help you find a suitable option and not overpay.

The editors of the site "bestx.htgetrid.com/en/" have prepared for you a rating of the best high pressure hoses for 2020.

What is a high pressure hose (HPH) and where is it used

The hose is a standard hose with a reinforcing layer inside, as well as some transition elements. Thanks to them, the structure is connected to various devices and mechanisms designed to transport liquids under high pressure.

Often, sleeves are placed at folds or to fix moving parts. For example, the design is found in an excavator bucket, but it is also used during well drilling, since a special solution must be constantly supplied there. The range of applications for the high pressure hose is extensive, from Karcher to industrial production. Today RVD is used:

• In cars and trucks;
• For normal operation of hoisting machines;
• In agriculture;
• For correct drilling of wells;
• At some stations.

Often, the sleeve can be found in some industrial enterprises, especially those related to woodworking, as well as housing and communal services or mining. Everywhere this element finds its application and without it it is impossible to organize normal working conditions. The high-pressure hose has technical characteristics, thanks to which the device can even be used for transporting chemicals, while they will not have any effect on the inside.

The advantage of high pressure hoses

Regardless of the manufacturer, the main design features are the same for many sleeves. So the structure consists of 3 layers, which ensure reliability and safety during the transportation of various substances:

• Inner rubber layer. The main purpose of this part is to ensure sufficient tightness of the structure. So that the sleeve does not deteriorate from the constant influence of an aggressive environment, the appropriate material is selected that does not have a negative effect on the product.
• The metal layer is made of special synthetic threads, which are highly durable. The reinforcing part can be either one or several. It all depends on the scope of the design. In addition, the layer can be made from a special wire. Both of these options are practically the same.Therefore, it is not necessary to sharply focus on this point.
• The outer layer, like the inner one, is made of rubber. The purpose of this part is to protect the device from external influences and to ensure sufficient strength. Also, the service life of the structure depends on the quality of performance. Therefore, it is important to pay attention to the wear resistance indicator.

There are metal fittings at the end of the hose to connect equipment to various mechanisms and units. The outer part and some elements can be made of different materials, it all depends on the field of application and manufacturer. For example, the metal layer can be made not only in the form of wires or filaments, but also braids. In this case, the difference will be minimal, but it is important to take it into account if it is planned to use a structure for pumping liquid under very high pressure.

Varieties of hoses

Most hydraulic systems use braided high-pressure hoses; coils will not work here. Because with frequent bending of the structure, the turns can diverge, which will lead to the formation of a large bend radius. In some cases this is an advantage and in others a disadvantage. It is important to pay attention to every nuance, this is the only way to choose a quality option.

But coiled hoses are not so useless. Since they are able to withstand high pressure and do not deteriorate from this. This feature is due to the fact that such designs can be equipped with 6 metal layers, in contrast to this, the braid is limited to only three.

High pressure hoses with two reinforcing layers must comply with European standards. For example, when using products marked EN857, a person will receive a hose with a small bend radius. Most often, such models are used in freight vehicles or units. Some Russian models are made in accordance with GOST 6286-73. In addition, most of these sleeves can be easily replaced with products made according to EN 853. The main feature of these two options is the presence of one or two braiding layers of wire.

Features of RVD production

For the manufacture of this element, only high quality raw materials are used, but only when everything is done in accordance with the requirements, and modern technologies are used. Then a reliable model is obtained, which is able to withstand work with various aggressive substances, and also does not deteriorate from frequent use.

The manufacturing process consists of four main stages:

• First, the required hose length is determined. The indicator allows you to identify the required load on the sleeve. To cut off excess parts, you should use specialized equipment that will carry out the process without the slightest damage, while everything is done accurately.
• Sleeve processing is carried out using a special machine, which is designed to remove the top layer. But in some types, stripping is optional. Therefore, this stage is skipped.
• RVD assembly. During this process, couplings and fittings are fixed to the hose on each side. The latter are fastened to the maximum stop, while their lock must completely coincide with the coupling. After that, a hydraulic test (pressure test) should be carried out, this allows you to identify a defective batch and remove it from production during time.
• The last stage is always the same - product labeling and packaging in an appropriate container. At the same time, it is important to understand that hoses have a limited shelf life, so transportation must be done carefully. Marking helps the buyer to determine according to which standard a particular product is made.

At first, it seems that this is insignificant information, but knowing the stages of production will help you find the right one for a specific area. Of course, it will take time to study the information, but this is better than buying an inappropriate high pressure hose.

What else is being paid attention to

RVD has several main technical characteristics that indicate the scope of the product. For example, it is important to consider:

• Operating pressure;
• The amount of fold;
• Ability to work with aggressive media;
• Minimum and maximum temperature.

The permissible value of the working pressure is indicated in the passport of the device. It should be remembered that each product is different in this indicator. For some, this value may be higher, while for others it may be lower. Everything is written in the technical specifications, and it is necessary to use the product only on the basis of this indicator.

The standard temperature at which the equipment can be safely used is between -40 and 100 degrees Celsius. However, this is not the limit, since some manufacturers produce structures that can withstand extremely low loads, down to -55 degrees.

The amount of fold determines the comfort of the sleeve. The lower this value, the easier it will be for the user to work. So it can be installed on various mechanisms and units, the integrity will be preserved, but the efficiency will increase. Each European standard or GOST corresponds to a certain level of fold, this parameter is in the passport of the device. In addition, it indicates where the WFD should be applied.

Rating of popular hoses for hydraulics

Ultraflex TU5 / 16

A robust device that is made from durable material and is suitable for hydraulic control systems. The connector is standard, so there will be no problems during installation. The outer part is made of good rubber that does not crack. Bends effortlessly.

Sold at a price: from 700 rubles.

Advantages:

Disadvantages:

RVD (24) 1,410m

A high-quality version of Russian production, which is manufactured in accordance with GOST. The design is able to withstand high pressure without deformation of the inner and outer layers. The convenient fastening method will allow you to place the product in a few seconds, while ensuring a tight connection.

The average cost is 750 rubles.

Advantages:

Disadvantages:

RVD DKOL 08-35-0450 (М 16х1,5)

A robust model that can withstand high loads without affecting the main components. The inner diameter of the hose is 8 mm, the working pressure is 35 MPa. The fitting is made in accordance with GOST 42705-81. The hose flexes well and does not deteriorate from frequent use.

Average price: from 300 rubles.

Advantages:

Disadvantages:

Rating of the best hoses for water

Quattro Elementi Genova 180

A reliable option that is suitable for transporting high pressure water. It is made of reinforced rubber, which is distinguished by its durability and strength characteristics. The products are equipped with convenient connections for various systems. High wear resistance guarantees trouble-free operation.

Average price: from 2 690 rubles.

Advantages:

Disadvantages:

Bort (Hose-8-Pro)

A budget 8 meter product that is suitable for pumping liquids, including water. The product is distinguished by quality characteristics and is able to work for a long period without deformations of the inner and outer layers. Convenient connection allows you to connect with various items.

The average cost is 1,740 rubles.

Advantages:

Disadvantages:

BOSCH 6 m F016800360

A good option from a popular manufacturer that will fit most systems where pressurized water transport is required.The length is 6 meters. The product is capable of withstanding a pressure of 135 bar. The maximum fluid temperature should not exceed 60 degrees, if the opposite happens, wear will occur.

Sold at a price of 1,120 rubles.

Dignity;

Disadvantages:

TOP-3 popular hoses for car wash

Huter AR (71/5/7)

Robust construction, which is designed for Huter W105-AR sinks where the maximum water temperature does not rise above 50 degrees. The outer and durable part is made of durable material that does not deteriorate from frequent use.

Sold at a price: from 1,320 rubles.

Advantages:

Disadvantages:

ELECTROLITE AVD Nut-Nut

High quality equipment designed for domestic use. The length of the device reaches 10 meters, while the working pressure is 180 bar. The hose can withstand high loads without affecting the inside or outside.

The average cost is 1,800 rubles.

Advantages:

Disadvantages:

CHAMPION С8121 (10 М)

Another quality model that is suitable for installation in car washes. Fully armored hose. The diameter of the connecting part is M14 * 1.5mm. The device can be used in conjunction with HP2130, HP2140, etc. The maximum water temperature is 60 degrees.

Sold at a price: from 1,260 rubles.

Advantages:

Disadvantages:

Quality hose for compressed air

METABO 0901054932

A quality model that can withstand an air flow of up to 20 bar. The diameter is 9 mm. Made from durable material. Connector type - standard. Therefore, the device will fit most systems.

The average cost is 5 320 rubles.

Advantages:

Disadvantages:

Fubag 170105 10 m

A popular model with a rapid connection type and an inner diameter of 8 mm. The product is only intended for use in a system that requires compressed air. The length is 10 meters. The product can withstand pressures up to 20 bar.

Average price: from 1,300 rubles.

Advantages:

Disadvantages:

Enkor-plast PVC air hose

A robust version that works seamlessly with compressed air. Made from durable material. The shape is straight, the product is highly resistant to bending and twisting.

Sold at a price: from 540 rubles.

Advantages:

Disadvantages:

Rating of popular models for the compressor

MASTAK 681-12100

100 meter product that is intended for use in a compressor. Made from polyurethane. The inner diameter is 12 mm, the device can withstand a pressure of 60 atm, which is a positive result. It can be used even at subzero temperatures down to -40 degrees.

The average cost is 25,620 rubles.

Advantages:

Disadvantages:

Wester 814-010 10 m

Durable product with quick-release adapters. Internal diameter - 6 mm, external - 12 mm. The product is perfect for installation in compressor systems. The maximum working pressure is 20 bar. Length - 10 meters.

The average price is 1,100 rubles.

Advantages:

Disadvantages:

Finally

Finding a quality hose that will last for a long time is not an easy task. After all, some models are not designed for long-term use and are made of cheap materials. If you have experience with high pressure hoses, or more interesting options, tell us about it in the comments.