Best garden drills for 2020

People who constantly spend time in the country have all the necessary tools to make their work easier. However, not everyone buys a drill, replacing it with a shovel. Yes, it is practical, but for complex tasks it is better to give preference to a special device, it will be much easier and more beautiful. To make the choice as simple as possible, the editors of the site "bestx.htgetrid.com/en/" have prepared for you a rating of the best garden drills for 2020.

What it is?

The device is a metal rod with sharpened blades located around the perimeter. For drilling, the tool is screwed into the ground with the help of a person's own strength. After that, the user forcibly pulls out the drill along with the earth that remains on the blades. It turns out a beautiful and neat hole where you can plant a seedling.

Although they all look the same, there are dozens of species from different representatives on the market. Some are distinguished by the quality of the material, others by the convenience. In addition to hand-held devices, there are mechanical drills, having bought which a person will make minimal effort to create new holes. Those who are not ready to pay for this tool should know that you can create it with your own hands using only available tools.

Most often, the drill is used when it is necessary to create a beautiful hole with neat smooth edges and an accurate diameter. For giving, the device is used to perform drilling of any complexity:

• Install a columnar foundation;
• Drilling holes for the subsequent installation of the fence, which is a convenient solution and does not take much effort, unlike a shovel;
• Create holes for planting bushes;
• For digging holes or compost holes;
• For loosening the soil around growing trees.

It is also important to understand that the design of an industrial device will differ from the garden version. Because the dacha tool depends on the purpose, while the professional one is almost universal.

Arriving at the store, you need to pay attention to:

• Number of blades around the perimeter;
• Diameter of cutting elements;
• Bar length;
• Workmanship.

The main advantage of the garden auger is its weight and ergonomics.

The main types of drilling devices

Power tools for loosening or borehole creation, powered by an electric or gasoline engine without the user's effort. In addition, there are models that function with a tractor, but these are more professional models. Manual mechanisms are used to make small pits and serve for a long period if not subjected to extreme stress.

The first thing that distinguishes these models is the type of engine. So there are gasoline designs and electricity.

The first option is preferable if a person is going to plant a tree garden or installs a fence or other protective structures on his own. It functions from a gasoline engine, which also differs and is:

• Wheeled type. This option is designed for difficult work, as it has high power, large dimensions and weight.
• Manual models.Compact devices that fit perfectly into the suburban interior and allow you to carry out heavy work, even a girl.

A gasoline drill works as follows:

• The engine is started. After that, you need to wait until the device warms up at idle, there is no need to rush, as it will not take much time, usually 3-5 minutes.
• Next, the tool is installed in the selected place and the user presses a special button that starts the auger.
• After turning off the engine, the "drill" continues to rotate gradually reducing the speed to a minimum.

Modern devices are equipped with excellent protection against collision with unexpected areas, such as hard ground or stones. As soon as the tool begins to experience resistance, it stops immediately.

Electric drills are useful in a completely different way, as they are used only in cases where it is necessary to dig a well or loosen the soil. Although the principle of operation is the same for both devices, the electric option is preferable for heavy drilling. This is due to the fact that:

• The drill has a high drilling speed;
• It is possible to change the attachments that are suitable for the current situation;
• You can work both with ordinary soil and with difficult ones, even with ice.

Disadvantages of such models:

• High weight for manual options;
• Big sizes;
• Requires a permanent connection to the network.

The main differences between tools by type of attachments

Regardless of the number of models that the modern market is able to offer, there are two types of nozzles in total: disk and screw.

The auger is a rod of different sizes (depending on the user's requirements), along the perimeter of which screw blades are installed. Such a device makes it possible to dig a small hole with a small diameter. Most buyers prefer this option for installing poles or landscaping the site. Because despite the small diameter, a great depth is achieved.

Advantages:

• Convenience and ease of screwing;
• The top layer of earth is removed automatically.

Disadvantages:

• A person cannot create a large diameter hole;
• Impossible to make at home.

Disc blades

This model has a pointed rod to which sharpened discs are mounted, their thickness is 2 mm. To ensure greater reliability, these elements are either screwed onto bolts, applying force, or welded. The discs are positioned in front of each other at an angle of 25 degrees. The efficiency of the device depends on the correct assembly. So if the angle is respected, then the blade will easily enter the ground when screwed in, and excess earth will be removed at the exit. The number of rows depends on the density of the soil where the work is taking place.

Hand drills and industrial

The standard hand drill for giving also differs into disk and auger. The only difference is that the rod is not connected to the motor and the whole process takes place thanks to the effort of the user.

But besides this option, you can find other types of drilling devices:

• Shock rope installation. This option is in great demand in the construction industry or when it is necessary to drill wells. Its use in summer cottages is rare. The device is a tube that is placed in a tripod. The movement takes place thanks to the impact bar.
• Crown instrument. An industrial version suitable for complex tasks. For drilling, a pipe is used, where on the lower base there is a toothed crown made of durable metal that will withstand soil of any density. Special equipment is required to carry out the work.
• Chisel. This model is in demand when drilling on dry or hard soil. The device is powered by the percussion method with the simultaneous rotation of the instrument.

The drill design is not as complicated as it might seem at first glance.To make a simple home model, you need to have the skills of a locksmith and welder at an entry level. The most important thing is to make an ergonomic handle during construction and correctly calculate the blade design. Then the person will perform drilling quickly, efficiently and with maximum comfort.

Rating of the best hand drills

Bison garden drill

A good hand tool designed to drill holes for pile foundations and install distressing structure. In addition, it can be used to create seedling holes or to drill deep fertilizing holes that are used to feed the root zone of shrubs or trees.

Ergonomics are made at the highest level and fully correspond to the money spent. High-quality metal was used in the manufacture, which even goes into rocky ground without problems. The construction of the drill is completely collapsible, which allows it to be transported with maximum convenience.

Sold at a price of 5,500 rubles.

Advantages:

Disadvantages:

ROS 77241

A hand drill of domestic production, which will perfectly fit into the interior of any summer cottage and will delight the user with its efficient work. It can be used for more than just digging holes for trees or bushes. In addition, some users use it for more complex applications.

The body and main elements are made of tool steel. Therefore, it is better not to use it for working with dense soil, since the metal will not withstand such a load and will bend or burst (depending on the applied force). A great advantage is the ability to change attachments, which will allow you to adapt to a specific area. Also, the device has an increased operating life if it is used for its intended purpose and not subjected to extreme loads.

The average cost in stores is 800 rubles.

Advantages:

Disadvantages:

CALIBER NSHU-200 / ZEM

One of the best drills for home use, which will allow you to carry out work of light to medium difficulty without any problems. With the help of such a tool, the garden will heal with new life, and the site will take on a fresh look. It is used to construct holes that will allow the introduction of fertilizers.

The handles are ordinary, there are no rubberized elements for convenience. Therefore, if a person often works with a drill, then he needs to independently think about the possibility of modernizing this unit. Then the comfort will increase, and with it the productivity. The rod and cutting elements are made of high quality metal that can withstand light loads. It is important to remember that this drill is not protected against corrosion and therefore must be stored under specific conditions to avoid corrosion.

The average price is 1,500 rubles.

Advantages:

Disadvantages:

Tornado PRO

An excellent manual drill from the budget segment, which will help to carry out all summer cottage work with maximum efficiency. Drilling to a depth of 140 cm is effortless. The handles also do not have an additional element that will increase ergonomics, but even without this, according to buyers, such a device copes well with the tasks.

The body is made well, of course the metal is thin and tool steel was used in the manufacture, but when used at home, a person will not notice this. For professional work, it is better to buy an appropriate device that will facilitate drilling several times.Tornado PROFI is designed for careful use, after completion of work, it must be cleaned, washed, and then folded into a box and stored in a dry place. Compliance with all the rules guarantees the user durability and reliable operation.

Sold at a price of 1,000 rubles.

Advantages:

Disadvantages:

FISKARS Quikdrill

A beautiful and productive tool with high performance and ergonomics. Thanks to this decision, a person will bring all ideas to life and decorate their country house. FISKARS Quikdrill will enable you to drill with ease and safety.

The body is made of high quality steel that will not crack or soften over time. Also, the manufacturer equips the device with a beautiful and unique design. Gloves are not required for work, as the handle is equipped with a proprietary material that will not rub the palms. Therefore, a person will be able to do much more work without hand fatigue.

It is sold in many specialized stores at a price of 4,300 rubles.

Advantages:

Disadvantages:

Kramas BR-2

A versatile tool that can solve almost any professional and everyday problem. Installation of poles, preparation of supports, drilling of wells, etc. The hand drill will handle these tasks by 5 points.

The peculiarity of the device is the possibility of disassembly, while the strength remains at the highest level. Thanks to this solution, you can easily transport the earth auger to a convenient place.

No physical effort is required to work, which makes it possible to carry out complex operations without assistance. Drilling is carried out using replaceable nozzles with a diameter of 80 to 450 mm.

Average cost: 2,900 rubles.

Advantages:

Disadvantages:

Rating of quality mechanical drills

PATRIOT CA408 Li 40B

An excellent electric drill that will allow you to carry out a variety of operations with maximum efficiency. In one minute, the device makes over 200 revolutions, which has a positive effect on the overall performance and will allow you to complete most of the ideas within a couple of days. The maximum drill diameter is 120 mm.

The device is made of quality components that have an increased service life. It weighs 6.7 kg, so a little effort is needed to transport. The main battery is a rechargeable battery.

Sold at a price of 13,000 rubles.

Advantages:

Disadvantages:

StrikeMaster Lithium 40V

This is an excellent professional electric drill that will allow you to carry out work of any complexity. It can be used for industrial drilling or bought by people who plan to carry out such work on their own. If you have certain drilling skills, its cost will pay off after 2-3 months of active work.

The body and other elements are of premium quality, which guarantees reliability and safety. Having bought such a tool once and engaged in maintenance in a timely manner, it will last more than a dozen years and will benefit not only the owner's site, but also the neighbors, if they want it.

The average cost is 50,000 rubles.

Advantages:

Disadvantages:

CARVER AG-52

An excellent petrol device that will tackle any soil in a short amount of time. The device is equipped with a two-stroke engine with a maximum power of 1.9 hp. A big advantage is the translucent tank, which will give the user full control over the current state of the liquid, which will allow timely refueling. You can use augers of different diameters, this is an effective solution that will make it possible to adapt to any type of work.

The build quality is decent. No backlash and squeaks were noticed. The gas drill will last over 5 years without any complaints. The capacity of the fuel tank is 0.8 liters.

It is sold at a price of 7,000 rubles.

Advantages:

Disadvantages:

PATRIOT PT AE75D

An excellent branded tool designed for high-speed hole drilling in soil. It is used for light and complex construction and garden work. The device easily works with augers of any diameter from 40 to 350 mm. Thanks to such a device, a person will forget about a shovel for a long time, even to loosen the soil, this option is more suitable.

The design is made of reliable elements that have a long service life. The only drawback of this device is that two operators are required for correct operation.

Sold at a price of 12,000 rubles.

Advantages:

Disadvantages:

ADA GroundDrill-2

A lightweight and reliable device that almost anyone can handle. It is used for private use. Only one operator is required for control, which will help to correctly distribute the forces. This gas drill will carry out any drilling up to 2 meters when working in normal soil. The motor power is at a high level and makes it possible to use screws with a diameter of 200 mm.

The design is made with maximum comfort for the user. Transporting will not take away your energy, since the device weighs 9.5 kg. Power - 1800 W. The volume of the fuel tank is 1.2 liters. The tank for gasoline is made of translucent material, which will allow you to add liquids in time.

Sold at a price of 9,900 rubles.

Advantages:

Disadvantages:

Finally

Buying a drill is not such a difficult process if a person knows the main selection criteria. This device will help to correctly distribute forces and not get tired when performing work of any complexity. If you have experience using the garden drills described in the rating, or more interesting representatives, tell us about it in the comments.