The best kitchen sink manufacturers for 2020

A sink is a device that is bought once and almost forever. Therefore, it is necessary to approach her choice with a cool head: do not look at attractive price tags, a unique design, behind which is a blatant hack, etc. It should have only quality parameters, not rust and be easy to clean from various contaminants. The editors of the site "bestx.htgetrid.com/en/" have prepared for you a rating of the best manufacturers of kitchen sinks for 2020.

Installation method

Washing dishes has already become a part of human life; people do this "ritual" daily and 2-3 times a day. Therefore, when choosing a sink, you should pay attention to the functionality and the mood that it will convey during the service. Since the spray spreads in all directions during washing, this is also important to consider. In order not to buy a bad thing, considering dozens of options, you should choose according to the following parameters:

• Spaciousness. Of course, not for the accumulation of dishes, but so that you can put a large saucepan there and wash it without hindrance.
• Convenience in work. Also, this criterion includes the level of noise during use, it should be minimal.
• Become part of the kitchen.

Invoice

These models get their name from the installation method. To install it, it is enough to "put" the device on top of the pedestal, which is included in the kit. The most common shape of these sinks is rectangular with pointed corners. For manufacturing, stainless steel is used.

Some models can have either one corrugated side or two, which will greatly simplify the operation process.

The cabinet does not have a back wall, this is necessary to connect the siphon and the pipe. Inside, you can store various things from cans to special devices. Choosing the right cabinet for a specific design is easy, as manufacturers produce them in different colors.

Advantages and disadvantages

The advantages of this type include:

• Cheapness;
• Easy installation;
• Open access to every element;
• Lifetime;
• Design;
• Easy maintenance.

Overhead appliances have no strong drawbacks, except for very cheap sinks made of thin stainless steel. Such options make a lot of noise, and the resistance to stress leaves much to be desired.

Mortise

This model is mounted in a specific location in advance. There are three location options for this device: protrude a little, be on the same level, or recessed. It all depends on the choice for a particular situation. This type is preferred by users.

Advantages

Such a device has only pluses, it has practically no minuses.

• Convenience in work;
• Choice of 1000 options;
• Installation in any furniture;
• Lots of special features;
• Undemanding to special care.

By the type of installation, mortise devices are divided into:

• Top location. The most convenient installation and application. Also, this method will give the design a new look;
• On the same level.It is applied to all types of countertops, however, in great demand, in this case, models made of stone or glass are used. Installation requires special accuracy, so it is not recommended to carry out the installation yourself.
• Under the countertop. This option is rarely used in practice, since it requires more careful installation and is not suitable for every decor.

Sink construction

Manufacturers offer thousands of device models that differ in functionality, design, number of bowls, etc. Therefore, a person experiences difficulties in choosing a specific model.

How many bowls

Kitchen sinks come with one bowl, with two different or the same, and there are also models in which there are three at once. Of course, in the classic design, the device is equipped with one bowl and often this is enough. However, the usefulness of two is also on the face, so a saucepan or frying pan is soaked in one, and in order to avoid stagnation, the second bowl is used. This is a practical option.

An important element of the sinks is the drain. Models with a built-in valve are preferable, and the user can draw the desired water level and soak all the dishes. In addition, some models are equipped with a drain and overflow, this also affects the ease of use.

Bowl shape

There are at least 5 types of bowls on the market, each of which is unique. So, there are:

• Round;
• Classic rectangular;
• Square. They are in great demand as they are more practical;
• Oval, which will decorate the room more and give originality;
• Trapezoidal.

Bowl depth

The depth can reach 20 cm, the minimum is 12 cm. To choose the right depth, the buyer needs to compare with previous experience and remember whether he was comfortable or not. Also, the depth depends on the number of people living in the house. If there are 4-5 people in the apartment, then the option with 18 cm is preferable. In small families, the dishes do not accumulate so much if they are washed in a timely manner, therefore the standard options 120-140 mm are considered suitable.

It is also important to choose the depth, focusing on the presence of a drain with a valve. If you have one, then it is better to buy a sink with a depth of 160 mm.

The presence of a side

Bumpers are present in almost every model, the difference lies in their size. They are more than a simple decoration, they also add convenience in use. When buying a side, you should know the location of the mixer, if a person has a wall-mounted version, then a model with a narrow version is preferable, since a wide one will be out of place.

When choosing a side, it is worth paying attention to additional holes. They can be designed to integrate a dispenser, under a filter, etc.

With or without wing

The main element of any shell is the wing, which is a horizontal plane. It can be located both on one side and on both. There are models that are not equipped with such an element, so the operation of such sinks is difficult.

When buying a device with a smooth wing, a person must check the slope that goes towards the sink. The water will drain, which prevents the appearance of puddles. Most of the models with wings have a corrugated surface.

Also, when choosing a device with a wing, a person should understand that if he rarely cooks and prefers semi-finished products, then there is no point in overpaying for this element. It is designed for people who are constantly creating culinary masterpieces, you can put everything from vegetables to dishes there. The main thing is to choose the right size.

Basic materials

Stainless steel

This is one of the most popular materials used in manufacturing. However, it is important to remember that there are more than a dozen brands, therefore, to reduce the cost, some manufacturers use the worst option, which will not be able to withstand constant contact with water and will eventually be decorated with rusty spots. Therefore, in order to buy a quality item, it is better to trust trusted manufacturers.

Also, to be sure of the quality of the material, a person can look into the passport of the device and find the marking of the steel there. After looking at the information on the Internet about metal (a sink is considered to be of high quality, having 18% chromium, and also 10% nickel), then a conclusion is made about the purchase. The buyer will protect himself and save his nerves and efforts.

It is important to take into account the thickness of the metal, so models with walls over 0.5 mm are preferable. If this figure is lower, then the loud sound from falling water will spread throughout the apartment. And accidentally dropped dishes with sharp edges will damage the entire appearance.

The surface of the sink is matte and mirror. The latter type is demanding to care for, scratches should not be allowed. They are difficult to remove and spoil the look. Sinks with a matte finish are a practical option. Stains, streaks and other marks are almost invisible on this device. They are undemanding to care, just wash with a special detergent and that's it.

Fake diamond

Models with this variant are in second place in sales and may soon overtake the "stainless models". In terms of quality and strength, this material is not inferior to stainless steel, and a pleasant external performance adds zest to this product. In general, artificial stone is a mixture of natural and polymer elements.

The surface is smooth, and the sink is resistant to various mechanical damage and high temperatures. There are also hundreds of models on the market with different colors. A person can choose both classic colors and malachite, or choose their own version, which will become unique and inimitable.

Stone models are distinguished by their noiselessness, and rust is not terrible for them. They are unpretentious to care, so a person can use any detergent.

Ceramics

In terms of properties, this material is almost similar to the previous one. However, they are rarely found on the shelves. There are not many color variations, and strength and durability remain in the background. Also, a device with this view is difficult to install, since it is heavy. There are also copper sinks, but their cost is too high.

The best manufacturers of kitchen sinks

Blanco

The company is a recognized market leader in the production of sanitary ware. The company carefully monitors the quality of its products, their main goal is to ensure adequate safety at an affordable price. In addition, the company pays close attention to the design of the finished product, complements something, and removes something. This allows for excellent ergonomics. Most of the products are made of artificial stone, which has an antibacterial coating, but there are also models made of stainless steel.

High-speed and high-quality technical service was appreciated by over a hundred users. The manufacturer provides support throughout the warranty period, if problems arise with some elements, the company will send spare parts. Therefore, the user can always count on a high standard of service from the service personnel. The country of the brand and production is Germany. Price category: from 3990 to 190,000 rubles.

Advantages:

Disadvantages:

Polygran

A Russian company that has been manufacturing artificial stone sinks and other sanitary fittings since 2000. The firm has repeatedly experienced the economic crisis in the country and is still one of the leaders in the domestic market.

The main criterion of the company is European quality at the price of the budget segment. As their many years of experience and positive feedback proves, they managed to achieve this. After all, the company uses only high-quality German equipment from a well-known manufacturer in this industry: "Respecta Maschinenbau GmbH".

Sinks are produced from the following materials: stainless steel, quartz, artificial stone and combined. Cost of models: from 3400 to 22000 rubles.The country of origin and brand is Russia.

Advantages:

Disadvantages:

GranFest

A good company that has been manufacturing sinks, faucets and accessories for over 15 years. The big advantage is that the company has a developed dealer network both in Russia and in the CIS countries.

This is practically the only Russian manufacturer that offers sinks from various price segments. The firm has over 10 awards and international recognition.

Produces products from artificial stones in various colors. Cost: from 3,500 to 15,000 rubles.

Advantages:

Disadvantages:

Vladix

The company is considered a leader in the production of stainless steel products. This is evidenced by the prize-winning places that the production took over more than 15 years of service. The firm is recognized not only by buyers, but also by the National Federal Rating Program, where it has repeatedly won first place.

Products from this company are safe for health and meet all technological standards. Only qualified specialists work in the production, so the risk of marriage is minimal.

Manufacturing material - stainless steel. The country of the brand and production is Russia. The cost of goods is from 540 to 1500 rubles.

Advantages:

• Value for money;
• Customer confidence;
• Multiple winner of various nominations;
• Availability.

Disadvantages:

OMOIKIRI

A Japanese manufacturer that produces sinks with unique designs and better ergonomics. According to legend, the Japanese entrepreneur Kano Miura bought a stone production plant at an auction and named it "OMOIKIRI", which translates as "Resolve". In 1983, when the company strengthened its position, the businessman launched the production of high-quality and explosive shells.

Sinks come in a variety of designs and tend to infuse a kitchen with a Japanese feel. Products are made from ceramics, copper, brass, artificial stone and stainless steel. Price: from 4,800 to 70,000 rubles.

Advantages:

Disadvantages:

Seaman

If a person is looking for not only quality but also durability, then Seaman will provide him with this opportunity. According to the manufacturer, their products will last over 30 years, and with proper handling they will always look like new.

Regardless of the type of products manufactured, the goods undergo strict and careful control and only then are they allowed for sale. The products of this company will give a person not only comfort, but also safety.

Manufactured from materials such as copper, brass and stainless steel. Production cost: from 10,000 to 50,000 rubles.

Advantages:

Disadvantages:

Rerih

Italian sinks for those who like more. The company produces only expensive products that are designed to give the kitchen a rich look. The production is carried out in Italy, at all stages there is a careful control over the products. Therefore, shells are in great demand in a certain circle of people. Manufacturing is carried out from: copper, brass and stainless steel. The average cost is 26,000 rubles.

Advantages:

Disadvantages:

.

Rating of the best sinks for the kitchen

Blanco Metra 6S Compact

Nice sink from a German manufacturer that comes in four colors. So the user will be able to choose exactly the model that suits the interior of the kitchen. Installation method - mortise. There is one large bowl and an additional one where a person can wash small dishes while the main one is busy.

The device is made of artificial granite, therefore, it has operational characteristics. The buyer will have enough of this device until the next move. The rectangular shape will suit any kitchen, the sink has one straight wing with a recess for draining water. The complete set includes an automatic valve.

The average cost is 15,000 rubles.

Advantages:

Disadvantages:

Polygran F-14 96x51cm

This option is suitable for people who have enough free space in the kitchen. It is sold in six colors, so there will be no problems with the choice. Has two bowls, one large and the other small. On the sides there are two wings, which will delight lovers of cooking. The depth of the main bowl is 200 mm, so the user is provided with comfort and convenience while washing the dishes, and the additional one is 130 mm, which will allow you to put chicken or vegetables there for defrosting.

Due to the fact that the sink is made of artificial granite, it will be easy for a person to clean it from various contaminants. The device has good scratch resistance. The custom shape, which resembles a butterfly, will give the kitchen a new design. There is a hole for the mixer.

The average cost is 6800 rubles.

Advantages:

Disadvantages:

GranFest Practic GF-P760L

A classic sink that fits almost any interior. There is one large and deep bowl and a spacious wing where a person can put peeled vegetables or dishes. The device is made of artificial marble, many users note that the sink not only looks harmonious in the kitchen, but also has quality characteristics. Moreover, for such a cost, a person receives a model that will last for several years of daily operation.

The average cost is 6,000 rubles.

Advantages:

Disadvantages:

Vladiks V-401 80x60cm

Overhead sink from a Russian manufacturer. The rectangular shape will allow you to place the device anywhere. There is one bowl with a depth of 130 mm. It is recommended to use the device in the country or in a small family. There is a corrugated wing on the side, which makes operation more practical. Made of high quality stainless steel, resistant to corrosion and high temperature. The surface is matt. Metal thickness - 0.6 mm.

The average cost is 1100 rubles.

Advantages:

Disadvantages:

OMOIKIRI Kasumigaura 77-1-R

A stylish sink from a quality manufacturer that is easy to maintain. This sink is made of stainless steel with a wall thickness of 0.8 mm. Therefore, when washing dishes, the noise will be minimal. The device withstands mechanical damage and does not require careful maintenance. It is enough to sprinkle it with an abrasive detergent and there will be no traces of dirt. Depth - 180 mm, will allow a person to wash dishes in comfort. There is a hole for the mixer.

The average cost is 7900 rubles.

Advantages:

Disadvantages:

Seaman Natural Genova SMC-6046U

An original sink that does not fit every design. Supplied in one color - brown. The external performance resembles something rare. It is a standard rectangular sink without additional functions or fenders. There is one bowl, its depth is 200 mm, which will allow washing all the dishes in a short time. The minimum width of the cabinet where the device will be mounted is 70 cm.The product is made of copper, therefore it has a high strength and durability.

The average cost is 44,000 rubles.

Advantages:

Disadvantages:

Rerih Polaris Gold

This round flush model is perfect for a luxurious design. Although brass was used in the production, the shell looks like gold. This option will appeal to every person who is ready to overpay for excellence. The device does not have any additional functions and is an ordinary sink. Depth - 180 mm. The minimum cabinet width for correct installation is 60 cm. So the device will fit into the right place without any problems and will decorate the room with its royal look.

The average cost is 24,000 rubles.

Advantages:

Disadvantages:

Finally

Above, popular and original kitchen sinks were considered. If you have experience using the sinks described in the rating, or a more interesting model, tell us about it in the comments.