The best hot tub manufacturers for 2020

After a hot bath, it is customary to plunge into cold water, but not everyone can build a bath near the reservoir. Then the font comes to the rescue. The design is a large container made of metal, wood or plastic and filled with liquid. In order for it to serve for a long period, it is important to choose the right product and know which companies are best to give preference to. Therefore, the editors of the site "bestx.htgetrid.com/en/" have prepared for you a rating of the best manufacturers of hot tubs for 2020.

Varieties

Today there are hundreds of types of font, some differ in size, others in shape. It is customary to use tubs in saunas and home baths. However, if the user decides to install the structure from the outside, then it is better to give preference to products that resemble a small pool. They will fit perfectly into any yard, but the right material should be chosen. There are also fonts that take up a minimum of space, as they are placed in the corner. Such solutions are suitable for small spaces.

There are also universal designs, for example, a collapsible design. If desired, the user can install it both indoors and outdoors. There are also expensive options that are equipped with a hydromassage or jacuzzi, this solution will perfectly complement any interior. In addition, thanks to such functions, a person will receive not only pleasure from going to the bathhouse, but also a healing effect.

Various materials are used for the manufacture, but products made of wood are more popular. Plastic models are suitable for those who want to save money. Concrete and metal options are less common. External performance depends entirely on the specific manufacturer.

Which form is more practical

Square

Such models are practically not made of wood. Since this material has a drawback - inconvenient operation. This is due to the fact that the structure does not have sufficient rigidity, in addition, the corner part dries out for a long time and unevenly, which will create additional problems in the future. If the user decides to buy a square structure, it is better to give preference to plastic or concrete models. Then the service life will increase, and it will become easier to use the hot tub.

Round

This option is intended for outdoor installation, but can also be placed inside if the person has a large space. Round models are made of wood and look like a large barrel. Everything dries out evenly, so there will be no problems with operation.

Triangular

Such models are used less often, but if a person wants to buy such a design, then it will not be difficult to find a triangular design on the market. Basically, in the manufacture it is customary to use: plastic or wood. The main advantage of this option is that it easily fits into the room.

Oval

Classic hot tubs that are very popular.They are easy to manufacture and do not require complex maintenance, which has a positive effect on convenience. In addition, some models do not take up as much space as square or round ones, which makes it possible to install them in any room.

Material selection

On the market there are fonts made of:

• Of stainless steel;
• A certain type of wood;
• Acrylic;
• Polypropylene;
• Concrete;
• Stone.

If desired, a person can find a model that will consist entirely of bricks. The budget option is an inflatable font, it is installed outside or inside the premises. However, the design also has a drawback - the font is not recommended for use outdoors in winter. Because regardless of the price, the material can crack and water will start to leak.

Metal structures are not widely popular and this is due to several factors:

• Ugly external performance;
• Requires careful maintenance, despite the fact that it is made of stainless steel;
• The water inside cools quickly;
• High price.

Concrete structures are notable for the fact that the user is able to install them not above the surface, but flush with the floor. Of course, such models cannot be moved, since they are completely stationary. However, concrete fonts look many times more attractive.

Plastic models are popular only because of their low price and easy installation. Also, every year manufacturers release more and more products of various shapes, which allows you to choose a good ready-made solution right away, and not wait until it is made.

The advantage of plastic structures is that they do not require finishing. Because they are sold ready-made. It is enough for a person to choose a shape and install a font. In addition, the average service life of such a solution is 50 years, which is several times higher than that of some materials. If an expensive model is purchased, then a person can be sure of the quality of the plastic and that over time the product will not lose color. Even under frequent exposure to ultraviolet radiation, this design will retain its positive characteristics and will not deteriorate.

A wooden hot tub is considered a classic option and is suitable for all baths made of the same material. When buying this option, you need to pay attention to the breed, since the service life of the product depends on it. To prevent the tree from absorbing moisture, at the production stage it is treated with protective compounds. This solution allows you to increase the service life and reliability of the product.

Finishing and additional functions

The form is chosen depending on the requirements. The decorative finish is chosen at will, it can be from the outside or from the inside. Therefore, finding a suitable option will not be difficult.

In order for the structure to have sufficient rigidity, reinforced walls and a bottom are used. For ease of use, most of the models are equipped with ladders and steps. This solution will make the hot tub easy to use and increase safety.

Some designs support the installation of a hydromassage; it is also possible to build a small fountain. Inside, you can lay LED backlighting, which will achieve a unique appearance. Of course, the cost of such work is not cheap, but as the reviews show, they are worth it.

If a person has sufficient experience, then he is able to perform most of the work on his own, including building an additional water supply. The main thing is that all areas have good tightness, otherwise the operation will bring more problems than relaxation.

Some owners put tiles on concrete structures. This operation is performed independently, since it does not require special knowledge. In addition, the cost of this material is not so high, but thanks to it, wear resistance and service life are increased.

Wood species

Larch

Such a design is intended for those who want to get not a simple font, but a wellness one.The breed has positive properties that have a beneficial effect on the skin, making it look younger. The advantage of the design is the ability to withstand high loads and sudden changes in temperature, which makes it possible to place the hot tub outside at any time of the year.

Cedar

The main difference of the breed is its high density, which is 1.5-2 times higher than that of the previous version. In addition, cedar contains a large amount of phytoncides, which prevent the formation and spread of fungus and mold. Therefore, it is practically not required to look after such a performance.

Aspen

The only advantage of aspen models is that they do not have a pungent wood smell. This solution is suitable for those who do not want to constantly feel woody aromas in the room. There are no advantages in terms of technical characteristics.

Beech

Hot tubs made of this breed are suitable for outdoor installation. The tree perfectly withstands sudden changes in temperature and does not crack. In addition, it has good density and strength properties. However, there is also a drawback - it has a pronounced tart aroma.

Oak

This breed is the most common and widely popular. The positive properties of this tree are known to almost every user. Oak has a positive effect on the condition of the skin, and also tones the body, giving vigor. In addition, infusions from this breed promote rapid wound healing. Also, some scientists note the restoration of normal sleep and metabolism.

Size Features

This criterion depends entirely on the user's requirements. Today there are containers that have a depth of two meters, but you can also find products with a lower value. Width also varies according to the requirements of the owner himself.

The shape of the hot tub can be different, but round-shaped products are in great demand. The average diameter is 1 m 20 cm. This value is quite enough for two people. The standard dimensions of an oval shape are 78x120 cm. For plastic products, the diameter is usually from 1.2 to 1.5 m. Of course, there are more overall models, however, they look more like a small pool than a hot tub. Minimum and maximum wall thickness from 5-12 mm.

Rating of the best Russian font manufacturers

Maestro woods

A good Russian company that produces hot tubs of various shapes. A wide range will help you choose a quality model in a short time. Each product is different in performance and durability. Basically, the company produces structures that are made of wood, while the user has a wide selection of species.

The dimensions are standard, one person can easily fit inside, however, more spacious products can be found. The products are made of the highest category wood, which allows to achieve maximum service life and reliability for the entire period of use. It does not require constant maintenance, since it is impregnated with protective compounds at the production stage.

Advantages:

Disadvantages:

BENTWOOD

The company was founded in 1999 and has produced over a million different fonts in 21 years. Each model has a stylish design and comfortable use. If desired, the user can order a hot tub with a ladder, which will simplify operation. The company offers hundreds of options, made of different types of wood.

In addition, the manufacturer produces shower cabins and washbasins that will be in perfect harmony with the background of the hot tub. The outer and inner parts are treated with a polymer compound, which increases impact resistance and prevents rapid wear. Therefore, the product will always look fresh and beautiful.

Advantages:

Disadvantages:

Gifts of the Cedar

The company was founded 4 years ago and in a short period of time managed to acquire a wide client base. Every user who bought a font from this company has always recommended the products to friends and family. Due to high demand, the manufacturer expanded production and opened a second workshop. Also, in order to increase the quality and speed of work, German machines were purchased. The company supplies hot tubs not only to the Russian market, but also to some foreign countries, where they have found regular customers.

The Altai relict cedar of grade 0-1 is used for production, this is easy to be convinced of, since there are practically no knots in the structure. In addition, this breed has beneficial natural properties that prevent the development of bacteria and have a beneficial effect on the skin. When buying in a company store, there is a long-term warranty, which is 1-3 years.

Advantages:

Disadvantages:

RANWOOD

The company produces dozens of hot tubs that differ in shape and size. The cost of each product is at an affordable level. The outer and inner parts are processed only with a safe and high-quality composition, which allows to increase the service life and reliability of the products. Delivery is carried out in the shortest possible time. The main material used for production is larch.

Advantages:

Disadvantages:

TOP quality foreign hot tub manufacturers

SpaDealers

The company was founded in 1981 in Finland. Each product is tailor-made to meet customer requirements to ensure convenience and quality. Only environmentally friendly material is used for manufacturing. High reliability is achieved through the use of quality tools and equipment. In addition, each item comes with a two-year warranty.

Advantages:

Disadvantages:

Blumenberg

A German manufacturer that offers not only classic models, but also containers with a stove and additional functions. This solution allows you to choose the right model for a room or street. Products are made from various types of wood, which helps to find a better and more reliable solution. The outer and inner parts are covered with special compounds that are safe for humans.

Advantages:

Disadvantages:

Kirami

A popular company that offers only high-quality solutions. The average service life of the hot tub is 40 years, which is an excellent result. The product is processed with protective compounds that are completely safe for humans, and also increase performance. Thanks to the wide assortment, buyers will find models that suit any interior.

Advantages:

Disadvantages:

FISPARS

A quality company that produces durable and diverse bath tubs, including heated products. Experienced engineers are engaged in the development of each model, after which they transfer the finished project to the production site and monitor the correctness of its execution. All this allows us to increase the quality of our products.

Advantages:

Disadvantages:

Finally

Anyone can find a good font for the bath. The main thing is to pay attention to the main characteristics and appearance.If you purchased products from manufacturers described in the rating, or you have more interesting suggestions, tell us about it in the comments.