Best manufacturers and models of toilet bowls for 2020

Modern sanitary fixtures can be divided into two types - floor and hanging. The most common are floor models. Communications for them are provided in almost every apartment, and therefore simple installation and minimal costs are required for installation. Suspended models are more complex and need installation. The editors of the site "bestx.htgetrid.com/en/" have prepared for you an overview of the best manufacturers and models of installations for toilet bowls for 2020.

Installation - what is it?

The installation is a special mounting structure required for fixing suspended sanitary equipment - a toilet bowl, urinal, bidet, sink. Due to the presence of the necessary fasteners, the structure allows you to hide all the technical "stuffing" inside the wall. Only the control system remains in sight. Installation is carried out on the outer part of the partition.

What are they?

The type of installation depends on where the main weight of the structure will fall.

Block is the best option if it is possible to fix the equipment on the main wall. Installation is carried out using anchor bolts, the mounting method is suspended. In general, the system is a frame equipped with a polymer tank. The frame is fully integrated into a niche made in the wall. The block type equipment is suitable for both pendant and floor units.

Frame - is considered a more complex structure. The sturdy steel structure can be attached to any wall or floor. The system is often used for various false walls and hollow drywall partitions. It is good in that it makes it possible to adjust the height of the equipment installation within 20 cm. This allows you to hang the toilet, bidet or washbasin in a position more convenient for the user.

How to choose the right model?

Main selection criteria:

1. Installation;
2. Control;
3. Functional;
4. Equipment;
5. Manufacturer;
6. Price.

Installation

Before you go to the store, you need to decide where the equipment will be installed.

Depending on the installation method, the following installation options are distinguished:

• standard;
• low;
• bilateral;
• corner;
• for in-line installation.

The standard installation should be selected when there are no restrictions on the size and installation depth in or near the bathroom. As a rule, the standard design has plus or minus an installation depth of 12 cm, a width of 50 cm, and a height of 112 cm. Installed in apartments with small bathrooms.

Low design allows for height limited installation. It is used in apartment buildings and other premises with certain design features, for example, low window sills. Especially for such a case, there are frames, the height of which does not exceed 82 cm.

The two-way system is most often found in shopping centers, office buildings and other places with high traffic. Its feature is the fastening of bowls from both sides.

Corner is needed when there is a need to install a toilet in the corner. This problem can be solved in two ways - use a corner mounting system or take care of buying special corner modules.

When it is required to combine several plumbing devices, an in-line installation system is used. It allows you to put several bowls side by side or fix a wall-hung toilet, bidet, urinal in a row.

Control

Installation controls should fit organically into the overall washroom interior. It is also important to make sure that they are quickly and easily accessible.

The controls include the flush system and mechanism.

In a modern plumbing device, flush can be reverse or direct.

The direct method means that the water from the hole flows in a direct stream into the funnel.

In the opposite case, the water first passes under the rim, is repelled from the walls of the product, and only then rushes down. Models equipped with a backflow method have several holes in the bowl, which causes the outgoing water to form a funnel. Backwash is considered to be the most effective for maintaining hygiene.

According to the principle of operation, the drain can be mechanical or pneumatic.

With mechanical, water is supplied using a drain valve and working rods with which the control key is equipped.

Pneumatic is based on the air pressure generated by the piston.

Pneumatics are better than mechanics in that they allow the flush plate to be located at a distance of up to 2.5 meters from the installation. This gives you more room to decorate.

Functional

Toilets are equipped with various additional functions. For example:

• aeration;
• seat heating;
• blowing;
• drying;
• built-in bidet.

Some options are quite possible to do without, but there are some that will come in handy.

The anti-splash system installed in plumbing minimizes or even prevents water splashing thanks to a special funnel design. Most modern devices are equipped with anti-splash.

The presence of a microlift protects the seat cover from a sharp fall. A special mechanism slows down its movement, so that it descends smoothly and accurately. This reduces the likelihood of cracking and damage to the plastic.

It also does not hurt to pay attention to the available flush mode. At the moment, there are three of them:

• normal is a mechanical button or lever used to drain water. Approximately 5-6 liters are consumed at a time;
• double is a combination of standard and economy modes. It is characterized by the presence of two buttons - large and small. The small button activates the economy mode, in which the water consumption is minimal - 2-3 liters. By pressing the large button, a full flush occurs, consuming up to 8 liters;
• economical - there is only one button that allows you to start and stop the water flow.

Equipment

The package must include the following items:

• controls with which a special block must go;
• wall-mounted frame with load-bearing function;
• parts with which fasteners are carried out;
• drain tank with adapter;
• soundproofing components.

Manufacturer

In order to avoid mistakes, when choosing, you should pay attention to the manufacturer.

Which company is better to buy plumbing?

Today the market is overflowing with various brands - both well-known and not so famous. The brand not least influences the cost; in addition, the products of each company have their own functional and design features.

The best manufacturers are:

1. Grohe - Germany;
2. Geberit - Switzerland;
3. Viega - Germany;
4. Ideal Standart - USA.

The popularity of models from Grohe and Geberit is due to the ease of installation, a significant operational resource and a long warranty. There are also disadvantages - high cost and difficulty in finding suitable parts.However, these disadvantages are compensated for by the highest German and Swiss quality, which practically excludes the possibility of breakage.

No less popular models are produced by Viega and Ideal Standart. They have such advantages as low cost and varied assortment. It is thanks to these two advantages that German and American firms have managed to firmly occupy a significant part of the plumbing equipment market. Despite the more democratic cost, Viega and Ideal Standart products are of good quality.

Budget models are available in the assortment of such companies as Cersanit, Santek, Roca.

Price

In order to answer the question of how much a high-quality installation costs, many factors should be taken into account. At a price, the systems differ depending on the brand, quality of materials, dimensions and functionality of the mounting structure. An inexpensive system will cost on average from 9,000 to 12,000 rubles, models in the middle price category range from 16,000 to 18,000 rubles, premium devices cost from 20,000 to 30,000 rubles.

Advantages and disadvantages of toilets with installation

Advantages:

Disadvantages:

Main technical characteristics

room	Specifications	Recommendations
1	A type	In plumbing rooms, devices such as toilets, urinals, bidets, benches, etc. are installed.
2	Design	Conventionally, all devices can be divided into wall-mounted and corner models. Wall-mounted (attached) are installed right next to the wall. In this case, the drain tank is mounted separately, often hidden in the wall. Corner models are installed in the corner of the room. They are compact and save space.
3	Body material	Most of the models on the market are made of sanitary ware and sanitary porcelain. Also used are metal, artificial and natural stone. Sanitary ware is inexpensive, but fragile. Sanitary porcelain is stronger and has a low porosity, that is, it absorbs less moisture and odors. Metal is easy to clean, resistant to damage, but expensive. Metal products can be picked for the office. They are less suitable for home use. The best models are made of natural and artificial stone. They are the most hygienic due to their smooth surface. Their main disadvantage is the price.
4	Release	The outlet can be vertical, oblique and horizontal, depending on the way the drain holes are located. The vertical (outlet to the floor) is best mounted when the sewer is connected from the floor. Horizontal (outlet into the wall) is most often found when summing up the sewer from the wall. Oblique - the most versatile, allows for both vertical and horizontal installation.
5	Tank installation	The installation can be mounted or hidden. Also, the tank can be installed on the bowl. This is the simplest method, allowing you to easily repair the drain device if necessary. A concealed tank is mounted directly into the wall. This allows you to reliably hide the plumbing element and leave more free space in the room. A tank with a hinged type of installation implies that the element will be located almost under the ceiling.
6	Tank volume	The volume of the tank can vary from 5 to 7 liters. The larger the volume of the tank, the more times the drain device will operate without water collection.
7	Flush start	The plumbing device can be equipped with a mechanical, automatic or remote-controlled flush trigger. With mechanical, to start draining the water, you must press the button or pull the cord / lever. Automatic implies the presence of a special sensor hidden in the wall. It records when a person moves away from the device and starts the water drain. This system eliminates the need for constant human contact with the button.
8	Bowl shape	Depending on the shape, there are rectangular and oval devices. The most common models are oval. Rectangular models are larger and do not have rounded corners.
9	Bowl height	The size of a standard bowl in height is 35-40 cm. For heavy and tall people, it is best to choose devices with a height of 45-50 cm. The height of hanging models can be adjusted during installation.
10	Appointment	Individual models of plumbing structures are designed for specific groups of people. For example, there are special children's toilet bowls, the distinctive features of which are small dimensions and bright colors. There are also devices for people with disabilities (disabled people). They have a wide bowl, handrails and armrests, and allow height adjustment.
11	Overall dimensions	The internal section of the installation can vary from 54 to 70 cm. The design should be chosen based on the size of the room and the weight of those who will use the toilet.

Below is a ranking of the best toilet bowls with installation in three price categories. There is also a photo and description of the goods.

Rating of quality models for 2020

Inexpensive models

Cersanit Delfi + Leon S-SET-DELFI-Leon-Cg-w

Wall hung toilet bowl economy class with mechanical installation. The dimensions of the mounting structure are: height - 120 cm, width - 35 cm, depth - 25 cm. The oval bowl with a horizontal outlet is made of sanitary faience. The set of the wall-mounted structure includes a drain tank, a seat, a mounting frame, a flush plate, and a set of mounting elements. Suitable for installation at home and in public places.

Advantages:

Disadvantages:

Santek Neo 1WH-3024-63

Reliable wall-mounted toilet bowl with an installation, the dimensions of which are (h / w / d): 112x40x20 cm. The high strength mounting frame is made of metal coated with an anti-corrosion compound. Withstands loads up to 400 kg, and therefore is suitable even for very overweight people. The flushing mechanism is equipped with two operating modes - the usual one, in which it consumes 6 liters of water, and the economical one, which consumes no more than 3 liters. The filling valve is virtually silent. The control panel is made of plastic that is resistant to temperature extremes and moisture. The compact rectangular bowl is made of sanitary porcelain, which is very easy to maintain. The fittings are made of high-gloss chrome. The construction is suitable for home toilets and bathrooms.

Advantages:

Disadvantages:

Cersanit Delfi + Vector S-SET-DEL-Vec-S-DL-Cm-w

Wall hung toilet with concealed installation and horizontal outlet. The kit includes a 6 liter drain tank, which is hidden in the wall when installed, a seat with a microlift, a one-piece mounting frame, a flush plate and a set of mounting brackets. The dimensions of the installation are 105 cm in height, 39.5 cm in width, and 31 cm in depth.The classic oval bowl is made of sanitary porcelain and has a height of 37.5 cm. The structure is mechanically operated using keys. Maximum load - 400 kg.

Advantages:

Disadvantages:

Average price category

Grohe Bau Ceramic 3958-60-00

Wall hung toilet from a German manufacturer. The kit includes a drain tank, a seat cover, a mounting frame, a control panel, mounting brackets and soundproofing. The dimensions of the installation are (h / w / d): 113x50x16.5 cm. An oval bowl made of sanitary porcelain. A tank with a mechanical drain type is equipped with a small inspection window. The wall-load universal frame is made of steel and powder-coated on top. Designed for installation in front of a wall or partition wall. Allows you to quickly adjust the height and choose the installation depth. The pneumatic flush valve operates in two modes.

Advantages:

Disadvantages:

VitrA Arkitekt 9005-B003-7211

Wall-hung toilet kit with installation, which includes seat, cistern, mounting frame, control panel and mounting kit. The steel structure is easy to install and can withstand loads of up to 400 kg. The oval bowl, 31.5 cm high, is made of sanitary porcelain and has a horizontal outlet. Due to the water supply mechanism from the bottom, the system emits a minimum amount of noise. The volume of the drain tank is 3 and 6 liters, which allows you to adjust the amount of drained water. Construction dimensions (h / w / d): 127x49x24 cm.

Advantages:

Disadvantages:

Roca Victoria 893-100-000

Wall-hung toilet in sanitary ware with cistern built into the wall and horizontal outlet. The water is supplied from above. There are two flush buttons - normal mode and economy. The oval bowl measures 35.5 cm wide, 35 cm high and 52.2 cm long. The set also includes a seat, a panel with buttons, an installation, a mounting frame and a set of fasteners. Dimensions of the structure (h / w / d): 115x53x22 cm. Having compact dimensions and modern stylish design, the system will take up a minimum of space and will perfectly fit into a small bathroom. Suitable for installation in residential buildings, as well as in public and commercial premises.

Advantages:

Disadvantages:

Premium class

Ideal STANDARD Connect W88-0101

A kit produced by the leader in production in its segment. The structure includes a wall-hung toilet bowl with a horizontal outlet (into the wall), an installation with a built-in cistern, a seat cover, a control panel, a set of mounting fixtures. The robust self-supporting frame can carry loads of up to 400 kg. The built-in sealed cistern is protected from condensation accumulation. The bowl is made of sanitary porcelain and covered with glittering glaze. The system is designed for installation in a solid wall or behind a partition wall.Reliably hides all utilities, leaving only the flush plates outside. System dimensions (h / w / d): 130x35x24.5 cm. Suitable for installation in an apartment and for users of various weight categories.

Advantages:

Disadvantages:

VitrA S50 9003B003-7201

System for installing a wall-hung toilet with a separate cistern. The wall-mounted design with a horizontal outlet fits perfectly into the design of a modern washroom. The material of the rimless bowl of the classic oval shape is sanitary porcelain, 18 mm thick. The height is 35 cm. The kit includes a tank, a seat, a control panel and a complete installation kit including a set of mounting brackets. Dimensions (h / w / d): 127x49x14.5 cm. Product warranty is 2 years.

Advantages:

Disadvantages:

Roca The Gap 893-104-100

A beautiful wall-hung toilet with a high-quality installation system. The kit includes a tank, a seat with a lid, a mounting frame, a flush plate, a set of fasteners. A 44 cm high rectangular snow-white sanitary ware bowl is installed on a mounting frame, which measures 112.5 cm in height, 54.7 cm in width and 20 cm in depth. The flush system is equipped with two modes - full and economical. The volume of the tank is 3 and 6 liters, respectively. The water supply to the tank is carried out from the back.

Advantages:

Disadvantages:

It is difficult to answer the question which installation is better to buy. But in general, experts recommend choosing models with available spare parts. After all, if there are none, then you will have to change the system completely, and this is an expensive pleasure. It is also important to pay attention to the flush system and the overall dimensions.

If you have experience using the models listed in the rating, or more interesting options, tell us about it in the comments.