Best hairdressing scissors for 2020

A tool like scissors is known to everyone. They are used in everyday life by tailors and seamstresses, gardeners, electricians, designers, secretaries, etc. In general, they help out everywhere. And a hairdresser cannot be imagined without them. It is as one whole.

The editorial staff of "bestx.htgetrid.com/en/" brings to your attention the best selection of hairdressing scissors in 2020. The popularity of the models presented below is constantly growing, as is the demand for them.

What are hairdressing scissors

Types of professional hairdressing tools:

• hot;
• straight;
• thinning.

Absolutely every master has straight scissors, but hot and thinning scissors, basically, only from more experienced specialists who know how to use them. What are the differences?

A haircut begins with straight scissors, which have two sharpening options: convex (38 degrees) and straight (45-50 degrees). The first option helps to make thinner and more accurate cuts.

Thinning are used for shading and thinning hair. This tool is easily distinguishable from the others, as one of the blades looks like a comb, that is, it has many teeth. There are models when not one, but two blades are equipped with teeth. The second option is used by beginners, so they will protect themselves from the opportunity to cut off excess curls. But a tool with only one serrated blade cuts hair better without damaging it.

Hot scissors are a mechanism equipped with a heating element. This is a great option to “solder” the ends of the hairs, preventing further splitting. Hair is not damaged, since the working area heats up only up to 90 degrees, which is safe for the hair. The functionality is very complex.

What is the difference from household scissors

In high-quality hairdressing cutting tools, instead of a screw, there is a screw group - this is a complex system consisting of pressure elements.

High quality steel is used for manufacturing, which is able to maintain its original sharpening for a long time. Although the material is practically unable to change its shape, it does not have strong hardness either.

And, of course, the sharpening method is of great importance, which has an angle from 38 (convection) to 50 (straight). Models with micro-notches are also made. They hold the curls in place so they don't slip off the blades.

Handle shape. Many haircuts require a long work, during which time the master should not get tired of holding the tool. There are many options for handles and rings, each specialist must choose on his own exactly what he is ready to work with for a long time.

Top manufacturers

There are many manufacturers. Some are unknown to anyone, while others have earned fame as reliable companies.At the moment, Japanese, Italian and German companies are considered the best manufacturers. Each brand has a large assortment with many models that have their own pros and cons. Therefore, it is rather difficult to give an exact answer, which firm's scissors are better.

Scissors from China

In recent years, it has become more profitable and more convenient to order goods with Ali Express. The online store presents a lot of scissors for hairdressers made of high quality materials. You can read reviews under each product to make sure the seller is reliable and the quality of the product. This option is especially good for beginners when you need good, but budgetary scissors.

How to choose a hairdressing tool in an online store

Buying a product without seeing it is not easy, but possible. To make the right choice, read the following tips:

• Choose a reliable online store. Look at reviews on the work of the Internet resource on third-party sites.
• Reviews. They are worth studying carefully. Better to have photographs.
• Cost. Discounts are good, but you need to make sure the original price is not fiction. You don't need to order the cheapest product and expect something good.
• Manufacturer. It is better to take well-known brands.
• Detailed information. You need to carefully study all the characteristics: weight, length, material, color and so on. If the description is incomplete, then it's best not to risk it. A quality salesperson will never skimp on an accurate product review.

Where to buy professional barber scissors

The best option is specialized stores. Arriving there, you can ask the employee for a certificate - a document that confirms that the product is real, made in the declared country, etc. Also, the seller can give you a thing so that you can understand how comfortable it is to hold, look at the sharpening and screw group do not make mistakes when choosing. And there is no need to rush to low prices, quality goods will not be given away for nothing.

Criterias of choice

To choose the right tool, you should pay attention:

• In what condition is the screw tightening. To determine the tension, you need to grasp the ring, set it to a vertical position, with the other hand, move the other ring 80 (approximately) degrees up and release. At this time, there must be some kind of thin matter between the blades. If the distance between the screw group and the point of closing is ½ of the length, then the quality is good.
• Convenience of the model. Comfort is very important, as it will ensure long-term work without pain in fingers and hands.
• Material. This affects the durability and safety of the sharpening in its original form.
• Sharpening. This is the key to successful work. Be sure to pay attention to the sharpening angle, which should be from 38 to 50 degrees.
• Smoothness. In order not to harm your hair and not ruin your hairstyle, you need to pay attention to such a factor as smooth movement.
• Cost. Professional, high quality scissors won't come cheap. Inexpensive options are only suitable for beginners.
• The size of the teeth of the thinning scissors. Thin or not thick curls are cut with a tool with fine teeth, and thick hair - mainly with thick teeth. Of course, it is better to have both this and that option. But, if you are just a beginner specialist, then it is enough to take the option where the teeth are thin.

Barber scissors for left-handers

Craftsmen who use their left hand more often feel discomfort and fatigue when cutting, since many tools are in most cases adapted for the right hand. Therefore, good manufacturers solved this problem and made scissors for left-handed people.

They differ in the location of the blades, that is, the left blade is located under the right, and the place for the thumb is at the bottom. This does not cause discomfort for the hand of the master when cutting, but on the contrary, makes the work easier.

How to hold your hairdressing scissors correctly

Since the master needs to make many different movements during work, the grip of the tool is very different from when you need to cut the paper.When beginners are just learning, it is unusual for them to make the right grip, but this is a matter of time.

Short briefing:

1. The ring finger is inserted into the lower ring.
2. Grasp the instrument with your entire palm.
3. The thumb should be removed from the ring. The scissors should be in a prone position in the palm of your hand.
4. The thumb should only rest against the ring.
5. The palm should be relaxed.

This is a classic grip for starting and ending work. In fact, there are many tricks, the methods depend on the client's chosen hairstyle and the experience of the master. Some experts get used to holding the instrument not quite correctly, using their own individual tricks. If this does not affect the quality of the haircut, then there is nothing wrong.

What covers for hairdressing tools are needed

Any work equipment should be stored in a specially designated place. Therefore, you should not leave it open, without a case:

• Safety. The cover will protect the item from damage when dropped, from dust. In this case, nothing gets on the edge: dirt, excess moisture and other small solid particles will not settle.
• Safety. It is especially dangerous when there are small children nearby. Professional tools have a sharp edge, so cutting is easy. It is also unsafe for the animals around people and for the master himself.

Sharpening machine

This is expensive and powerful equipment. A professional tool cannot be sharpened with improvised means, because then the material and the sharpening angle may deteriorate.

Machine tools are:

• Universal;
• Specialized.

The second option is suitable for hairdressing scissors.

Machine tools are:

• Electrical;
• Manual.

The first option is a car with a large package, with a faceplate put on the shaft. The faceplate can be in a vertical or horizontal position. The characteristics of this equipment directly depend on the company, model.

Hand-held machines are much cheaper and come in different types. The weight and size of such equipment is smaller, but it is still worth taking care of a special place for their installation. Such a sharpener will be universal, it will not last as long as an electric one, but it will greatly help in everyday life.

Not everyone is able to sharpen the blade correctly. Therefore, it is better to trust a specialist who has special equipment with the function of sharpening hairdressing scissors. Especially if the tool is expensive enough.

Rating of quality hair clippers in 2020

A set of hairdressing tools DEWAL 9605 AS and 9605, Germany

8th place

Straight scissors 9605 and thinning scissors 9605 AS are made only in Germany, while steel is used from Japan. Plastic handles. Despite the fact that the tool is foreign, it does not have high quality and durability.

Average cost: 1000 rubles.

Advantages:

Disadvantages:

Straight scissors Mertz 341 / 5.5, Germany

7th place

Japanese steel is used for manufacturing. The tool is highly polished. Sharpening has durability. This model is used in work by both beginners and professional craftsmen. The quality is excellent and inexpensive for the price. The handles have small indentations for a comfortable grip. The ring also has a finger rest.

Cost: 1000 rubles.

Advantages:

Disadvantages:

Straight scissors SILVER BODY 5.5 ″ STU04-55

6th place

Option for beginners. Good quality and affordable price. The tool is made of steel, the grade of which is 420. The material is resistant to corrosion.

Sharpening lasts a long time, as the blade is hardened, which makes the steel even harder. The rings are symmetrical, but they are located at different heights so that the master is comfortable when cutting hair.

Average cost: 3000 rubles.

Dignity:

Disadvantages:

Thinning scissors Kapous SK10T / 6.0

5th place

The rings of the model are at different levels, this contributes to a long work without tension. Added curved finger rest. One serrated (35 teeth) blade.

Average cost: 1500 rubles.

Advantages:

Disadvantages:

Kedake straight scissors 6.0

4th place

Made of cobalt alloy, it is durable and practically does not deform. Therefore, the sharpening keeps its original appearance for a long time. Also, such material does not corrode. The tool rings are symmetrical, round in shape with rubber gaskets inside, providing comfort for the hands of the master.

Average price: 4500 rubles.

Advantages:

Disadvantages:

Thinning scissors Kapous SK10T / 5,5, Italy

3rd place

High quality steel is used for manufacturing. The rings are displaced, this helps the master to grip comfortably. One serrated blade (30 teeth). The surface is carefully polished. The ring is equipped with a finger rest. One ring is rubberized.

Cost: 2000 rubles.

Advantages:

Disadvantages:

Straight scissors JAGUAR A Silver Ise 5 1350, Germany

2nd place

The tool, 14 cm long, does not stand out for its design. The rings are practically at the same level, rubber gaskets are inserted inside. Classic sharpening - 45 degrees. There is an emphasis on the finger ring. Suitable for beginners.

Average cost: 4500 rubles.

Advantages:

Disadvantages:

Thinning scissors JAGUAR 96525 CM36 ES "SILVER LINE" 5.25 ″

1 place

The scissors have one serrated blade. The length of the handles is not the same, so the rings are located at different levels. Also, one of the handles is slightly curved, this provides comfort for the master while cutting.

The non-toothed blade is equipped with notches that help to cut the curls at regular intervals. The base has small depressions at the bottom so that it is convenient to press the tool with your fingers. According to buyers, this is an ideal option for professionals!

How much does this model cost? Answer: 8700 rubles.

Advantages:

Disadvantages:

The higher the quality, the higher the price. But for beginners, it is not necessary to immediately buy expensive work equipment. This selection contains the best options with low cost and excellent quality. And as you develop, you can expand the set of tools.Good start in hairdressing! Write in the comments about your experience of using hairdressing scissors, advise other popular models, high-quality options! What to look for?