The best operator panels for 2020

A user needs a good device to track the progress of technical operations. It should fully display all current information, and also be equipped with special control keys. Today manufacturers offer dozens of different models that differ in price and additional features. To make it easier to make a choice, the editors of the site "bestx.htgetrid.com/en/" have prepared for you a rating of the best operator panels for 2020.

Main purpose

The operator panel has many functions that control various devices. The device makes it possible to quickly enter and display information of interest, as well as set new parameters. This ability allows you to exchange information with a computer that is at a remote distance, as well as a controller. To do this, a special port is used, which is located on the device.

To enter new values, a small keyboard is used, in some models it has been replaced by a touch screen with a responsive sensor. Visual information is displayed using special indicators that are located on the front side. Information exchange is carried out through various interfaces. The operator can carry out tuning at a considerable distance from the main controller and not interrupt the work progress.

The operator panel is in high demand when building a distribution system. In this case, the user must constantly monitor the information and the correctness of the complex technological process. Which can be difficult to do in a standard way.

Where is it applied and how is it connected?

Some businesses are equipped with a powerful computer and screen, but this solution is applicable only to large facilities that can afford high spending on assistive devices. It is unprofitable for small factories to buy such a product, since the costs will not pay off soon. But every owner can buy a small device with a built-in keyboard and display. At the same time, the efficiency is not much inferior to complex computer technology. Training a new operator will not take much time, since the device contains only useful functions.

The operator panel can be connected to a different system at any point, the main thing is that there is enough wire length, but this is never a problem. The device allows you to carefully monitor the change in value and timely prevent emergencies that may arise in production. The effectiveness of this device has been proven for ten years and the result is always positive.

Also, the equipment makes it possible to divide workers into several groups, each of which will be responsible for a specific area, this will increase the efficiency of operations. The safety of this design is at a high level, since in order to make changes, you must have a special key or card. Therefore, the system is protected from intrusion by third parties, which prevents sabotage due to errors of an inexperienced operator.

Features of embedded panels

Modern electronics stores for manufacturing plants are filled with various panels.You can find a device for tracking specific operations, as well as a universal model that allows you to make changes to several execution objects at once. This is a convenient and practical solution that suits every plant.

Built-in models are in great demand. They are mounted in any convenient place and make it possible to monitor the work done. A similar solution is required for some technological devices. Because the device is easier to maintain and it is impossible to accidentally touch it, since there are no protruding parts.

The strength of the built-in operator panels is at a high level, they cannot be broken if you do not do it on purpose. The dimensions of the device are compact and the installation method is simple. Most industrial facilities try to buy only built-in panels, because they greatly simplify the workflow and do not require constant operator intervention.

Rating of the best operator panels

ARIES IP320

An excellent graphical panel that allows you to easily monitor and change the parameters of various objects. Due to its low cost, the product does not have a wide range of functional features, everything is at a simple level.

The device supports joint work with programmable logic controllers made by any company, which is a great advantage. The product is manufactured in a special panel box, which is not afraid of exposure to high temperatures, moisture and dust. Therefore, the product can be serviced every few years. And if the product is installed in a dust-free room, then maintenance is not required at all.

The device operates in the RS-485 network, in Master and Slave modes. The display is made of high quality materials and does not deteriorate over time, unlike similar monochrome solutions. For greater convenience, it is equipped with a special backlight that glows perfectly in the dark, which allows you to display information clearly and accessible.

Thanks to this device, it becomes easier to edit parameters; in order to do this, it is enough to use a special keyboard, which is located next to the screen. To supply power, you will need to provide the panel with a 24 V network, which will not be difficult for any enterprise. The set includes free software "IP320 Configurator", thanks to it, it will become much easier to configure the equipment at an early stage.

The average cost is 8 250 rubles.

Advantages:

Disadvantages:

Profibus PLC XV-152-D8-84TVRC-10 EATON

An expensive professional device that is designed to be installed in complex systems. It allows you to control the automation of various equipment and change the parameters to achieve the best result.

The screen size is 8.4 inches, which is the optimal solution, since all information will be conveniently located and a person will not have to look for the desired value for a long time. Control is carried out thanks to the touch screen, which is covered with a special layer that prevents the formation of various scratches. The display is colorful and bright, in addition, it does not get tired of the eyes, which allows the operator to peer into the parameters for a long time and not experience discomfort.

The degree of protection of the front panel is IP65, this is the best solution and increases the service life significantly. Suitable for indoor installation only. It is powered from a constant voltage in the range from 20 to 28 V.

The product has a dozen certificates and a long warranty. The outer shell is protected against minor mechanical shocks. The built-in processor allows operations to be carried out at maximum speed, which positively affects the operation of all devices. Reading and analyzing the information received takes a split second.

It is sold at a price of 250,000 rubles.

Advantages:

Disadvantages:

ARIES SMI1

The simplest and most reliable device designed to control simple systems. Editing values ​​is simple, control is carried out using membrane buttons. The product is compact and suitable for placement in various consoles or boards.

The work takes place according to the protocols OWEN, Modbus ASCII, Modbus RTU, which is the standard for such devices. The information is displayed on a small display in numerical and alphabetic values, so the operator needs to learn special codes that indicate the state of the monitored object.

The product supports 6 digital inputs that allow you to connect a variety of sensors. Or transistor switches. For power supply, a 220 V or 24 V network is used. The main design feature is protection against interference, this became possible thanks to a 90 ... 264 V pulsed power source, the frequency of which reaches 63 Hz. The product supports work with various controllers, and not only with devices from this company.

Sold at a price of 6,050 rubles.

Advantages:

Disadvantages:

Siemens desigo PXM10

A compact model designed for installation in uncomplicated production systems. The device weighs only 350 grams. The body is made of durable plastic that can withstand high temperatures and does not deform over time.

The protection class of the device is IP40. Therefore, it should not be used in places with high humidity. The operating voltage is standard and is 12 ... 24 V. A small screen is used to display information. Of course, you won't be able to show every value, only basic parameters are placed on the desktop.

The recommended operating temperature is 0 ... 50 degrees. The interface type is RS 232, so there will be no problems with connecting programmable controllers. Cable length - 3 meters. The product has a power consumption of 0.7W. The control takes place thanks to a special wheel that allows you to select certain parameters.

The average cost is 29,120 rubles.

Advantages:

Disadvantages:

ARIES VP110

A touchscreen operator panel that supports a built-in browser controls and changes the parameters of complex production facilities. The product is made of a durable plastic case that does not play and is not afraid of accidental dropping.

The screen is equipped with a responsive sensor and intuitive settings. The menu is in Russian, but English is also supported. The product is suitable for joint use with production computers and programmable controllers of any manufacturer.

The panel is connected via Ethernet, Wi-Fi or 3G interfaces, which is a convenient solution. The degree of protection of the front panel is IP65, which is the standard for such equipment. Thanks to the high-quality workmanship of the outer part, the user can easily install the product in any room.

The operator panel is mounted on a panel, for this it is necessary to use the appropriate mount. The product is protected against emergency shutdown, as it has built-in rechargeable batteries, which guarantee reliable operation in any situation.

The average price is 30,400 rubles.

Advantages:

Disadvantages:

LRHA04 Lovato Electric

An excellent product from a Russian manufacturer, which is actively used not only in Russian enterprises, but also in a number of European countries. The product is equipped with a high-quality screen that can withstand frequent use and is not subject to wear and tear.

The body is made of plastic and is a monolithic construction that does not allow dust and moisture to pass through. Thanks to the convenient menu, the operator can easily track changes in the workflow and change parameters to avoid emergency situations.

It is sold at a price of 39,000 rubles.

Advantages:

Disadvantages:

Mobiprof Delta operator panel

A model designed to be placed in some machines for tracking and changing information, which reduces the time of the operation by 2 times. The product is manufactured in Russia. The main feature of the product is recording up to 10 operating modes. For control, touch buttons are used, which are located on the side and bottom of the display. The parameters are displayed on a small screen. The backlight is present.

The average price is 50,000 rubles.

Advantages:

Disadvantages:

DOP-B operator panel

A reliable product that will solve 90% of tasks and automate production areas. For high-speed downloads, the USB Cpent port is used, so the operator needs a minimum of waiting to turn on the program.

Information is displayed on a color touchscreen display for increased ease of use. Built-in memory or flash card is used to store information. To expand the functionality of the device, the manufacturer has included support for macros, now the operator should press one button to set the value for a specific object.

Just in order to do this, the "hot" key is first configured, how to do this is described in detail in the operating instructions. For greater convenience, there is an audible notification that is triggered when an emergency or error occurs. It is better to use the product for network dispatching.

The average price is 53,400 rubles.

Advantages:

Disadvantages:

Finally

Operator panels must be used to achieve proper automation and reduce the risk of emergencies. The equipment will help to eliminate the errors that have arisen in the shortest possible time and will not allow them to appear in the future. If you have experience using the models described in the rating, or more interesting representatives, tell us about it in the comments.