Best wall mounted shower holders for 2020

When setting up a bathroom, every little thing is important, even as small as a shower holder. Manufacturers not only produce complete equipment, but also sell parts for them separately. This makes it possible to replace an accessory or choose the best option for yourself with the desired functionality. How to choose the right product and which product is better to buy, will tell you a review on shower holders in 2020 from the editorial staff of the site "bestx.htgetrid.com/en/".

Wall mount and its benefits

The shower head is attached to the holding mechanism. This is convenient, especially when the apartment has only a bathtub. Bath procedures become even more comfortable, as there is no need to hold a watering can.

The current market provides a large assortment of holders. They can be installed in a convenient place and the angle of inclination can be changed. The shower holders are mounted on a bar, wall-mounted or attached to a surface using a vacuum suction cup. The main thing is that the diameter of the product corresponds to the dimensions of the water divider - the largest part of the shower head.

Description of types of wall mounts

Hinge fasteners

Screws into the wall. Thanks to this, there is no need to fear that the part will fall off while taking a shower. The product can also be installed on a rod. The following qualities are distinguished as advantages:

• Good mobility despite being installed in one place.
• Reliability thanks to wall mounting.
• Availability. There are a large number of swivel fasteners on the market.
• Impact resistance due to its dense structure.

The disadvantages include the following:

• Location cannot be changed after installation. This can lead to a number of difficulties in repairs, such as replacing tiles.
• High price.

Suction cup holders

Before installation, be sure to wipe the surface of the tile from excess moisture. So, the mount will hold more securely. Recommended for use in a glass shower enclosure where it is not possible to drill holes for wall fasteners. On the wall, the suction cups can come off due to steam at the most inopportune moment.

The advantages are as follows:

• The price is significantly lower than for a swivel holder.
• No need to drill the wall for installation.
• No need to use tools.
• High mobility allows you to change location.

The disadvantages include the following factors:

• It is mounted only on a flat tile, the part will not hold at the junction of the panels.
• Suction cups are not durable. Over time, the material wears out and air particles get inside, which makes the fasteners unreliable.
• The quality is lower than that of hinged fasteners. It is not recommended to overload the product again.

Manufacturing material

There are 3 main types of material from which the holders are made. Let's take a closer look at their characteristics.

• Plastic. A budget option.Modern manufacturing allows you to create durable parts that are not inferior to metal products. The plastic accessories are chrome plated, making the holders look organic in any bathroom. Of the minuses, a rather rapid discoloration can be distinguished. Recently, components made of ABS plastic have become popular, which is actively used in modern production of household appliances, office supplies and in construction. The material is elastic and has a high level of impact resistance.
• Non-ferrous metal alloys. They belong to the middle price segment. They are durable and highly resistant to corrosion. The original appearance does not last long and the item needs to be polished periodically. A common material is an aluminum-silicon alloy, or silumin. It does not oxidize in water, but the metal wears out quickly. Bronze is considered a stronger alloy.
• Brass. A distinctive feature of brass products is the high price. This is quite justified, because their strength is much higher than other materials. Copper and zinc alloy makes the part ductile and hard. With prolonged use, stains form on the surface that are difficult to remove. To fix the problem, it is recommended to periodically wipe the surface, even if no trace is visible. The main plus of the material is durability.

Best shower holder manufacturers for 2020

When there is a need to buy one or another product, users have a question: "Which company is better?" It is difficult to give an unambiguous answer, because each company has its own disadvantages and advantages.

• Hansgrohe. The company was founded by Hans Groche in Germany in 1901. The main direction of production is sanitary equipment for shower rooms. For 2020, Hansgrohe has received numerous awards and patents for over 2,500 inventions.
• Grohe AG. The founder is the son of Hans Grohe - Frederik. The difference from the “competitor” lies in the extended production line. The company produces not only shower equipment, but also other types of sanitary ware. Manufacturing is based in Germany, Portugal and Thailand. The company's models are very popular and occupy a leading line in the entire plumbing market. The list of achievements also includes design awards and a place in the Fortune magazine rating as a company "Striving to Change the World". Grohe AG annually pleases consumers with new products equipped with modern technologies.
• AM.PM. A young but dynamically developing company, founded in 2010 in Germany. The team pays great attention to the design of their models. For 10 years of its existence, the company has received 77 awards. The company produces equipment and components that are available to most consumers.
• LEDEME. The company's offices are located in many cities of Russia - St. Petersburg, Moscow, Kazan, Novosibirsk and many others. Manufacturing is based in China, but product quality remains high. The manufacturer's catalog contains products of different price segments. The company manufactures plumbing equipment, accessories, adapters, mirrors, radiators.

Russian-made goods are produced extremely rarely. Basically, all workshops are located abroad. Well-known foreign brands in our country are represented by official dealers through which you can make a purchase. They have certificates and established contacts with the head office of the company.

Distributors will tell you where to buy and how to choose the right one or another accessory.

Tips for choosing and installing a quality holder

As practice shows, choosing a good shower head holder is not the easiest thing. What should you pay attention to and, most importantly, what mistakes are there when choosing? Below is a list of recommendations:

1. Choose which type of mount is needed - articulated or suction cup. If the unit is intended for a shower cabin or the wall surface cannot be drilled, it is better to choose a suction cup mount. The hinge hardware is wall-mounted, so you need tools to work. Strictly follow the installation instructions.
2. When installing the swivel mount, or rod, mark the wall so that the distance between the centers of the holes is identical to the part. Check the instructions for the diameter of the holder holes. It is very important. The slightest deviation from the specified parameters will not allow the structure to be securely fixed.
3. Before mounting, with the best location selected, test the slope of the shower head. After finishing work, insert the shower and turn it on at full power to check that it is securely fastened.
4. Pay special attention to the functions. Not all products can adjust the tilt and height of the shower.
5. The question "how much" is not always useful. When choosing, start from the functions of the device. It is better to buy a more expensive item than to buy another one later.
6. Pay attention to the manufacturer's brand. Some showerheads are designed to fit a certain holder model.
7. If the bathroom does not have tiles, install a swivel accessory. The suction cup won't last long on a damp wall.
8. Don't forget the design. Today, a large number of different stylistic and multi-colored models are produced that will harmoniously fit into the bathroom.

Best swivel shower holders for 2020

According to customer reviews, the editors of our site have compiled a list of the best shower holders that are easy to find in online stores on Yandex.Market.

Hansgrohe Porter S 28331000

Reliable product made in Germany. Made in Art Nouveau style. Modern design and chrome color add to the appeal. The advantage is the stable position of the stop.

Advantages:

Disadvantages:

Ravak 612.00 X07P345

A quality holder in a budget price segment. Attractive appearance and manufacturer's warranty make the model in demand among buyers. Has a chrome-plated surface.

Advantages:

Disadvantages:

Grohe Rainshower 27055000

Another representative of the Grohe company. The product is of good quality and is equipped with a swivel joint. The country of production is Germany, which guarantees German quality. GROHE StarLight technology delivers a vibrant gloss that matches modern bathrooms.

Advantages:

Disadvantages:

Grohe Relexa 28622000

Has a chrome finish. Equipped with GROHE StarLight technology like many popular Grohe models. This model combines an affordable price and German quality.

Advantages:

Disadvantages:

AM.PM F0500864

Robust brass component. This makes it possible to make a purchase for a long period. The model has all the advantages and is easy to use. The chrome color allows it to be installed in any bathroom, and the design will help to decorate the room.

Advantages:

Disadvantages:

To get acquainted with more detailed characteristics, we present a comparative table:

Model name	Material	Dimensions (w * d * h; mm)	Weight (gr)	Country of Origin	Average price (rub.)
Ravak 612.00 X07P345	Plastic	49*50*49	110	Czech Republic	263
Grohe Relexa 28622000	Plastic	44*65*44	90	Germany	730
AM.PM F0500864	Brass	85*75*42	300	Italy	790
Hansgrohe Porter S 28331000	Plastic	37*50*53	74	Germany	1930
Grohe Rainshower 27055000	Plastic	84*68*29	155	Germany	2420

In the top 5 of the best and most reliable hinge holders, there are models from trusted manufacturers. The details refer to different price segments, which will allow the consumer to choose the right option for himself.

Best suction cup shower holders for 2020

Below is a rating of quality suction cup holders according to buyers' opinion for 2020:

LEDEME L36 095359

A chrome-plated product of a budget high-value segment. The fasteners have good strength and are suitable for installation on a tile or wall of a shower stall. Country of origin - China. Available to any buyer.

Advantages:

Disadvantages:

Timo Beverly SB-044

It will last for a long time and will not lose its original appearance. Able to withstand up to 1 kg. The appearance is presented by a round shape and a chrome-plated glossy surface.

Advantages:

Disadvantages:

Shower head holder Н000235

Reliable fasteners. The silver color is paired with an orange button for decoration. Well suited for wall mounting.

Advantages:

Disadvantages:

Shower head holder Migliores Z04138

According to consumers, it is a very high-quality, but expensive option, in comparison with competitors. It is made of ABS plastic, has a tilt angle of 30 degrees. The structure can carry up to 5 kg and has a bright orange color that will add color to the bathroom.

Advantages:

Disadvantages:

LIKES Shower arm

Made of metal. Convenient to use, adheres well to the glass surface of the shower stall. The fasteners are available in 2 colors - orange and silver.

Advantages:

Disadvantages:

Below is a comparative table of the main characteristics:

Model name	Material	Dimensions (w * d * h; mm)	Weight (gr)	Country of Origin	average price
Shower head holder Н000235	Plastic	120*170*50	60	China	379
LIKES Shower arm	Metal	68*25*100	100	China	600
Shower head holder Migliores Z04138	ABS plastic	132*65*50	85	Italy	430
Timo Beverly SB-044	Plastic	48*50*48	120	Finland	330
LEDEME L36 095359	Plastic	76*112*70	100	China	159

The table shows that prices for vacuum holders are significantly lower. The weight of the products is small, so it is better to use small-sized shower heads.

Conclusion

In this article, we tried to answer what a wall holder is for and how to choose the right reliable and high-quality part. In any case, the assortment on the plumbing market is very large. The buyer can choose a product for himself according to any parameters: price, material or method of fastening. The product can be purchased at the nearest store or ordered online. This will help save time and arrange delivery on a convenient day.

If you have a need to purchase shower heads holders, tell us what do you pay attention to first?