Best floor standing water coolers for 2020

Clean drinking water is a source of health and energy. Everyone wants to be able to pour a glass of artesian water and replenish their strength. There is a person at home or in the office - this can be done simply with the help of a floor cooler. Convenient and practical solution: you do not have to wait for the kettle to heat up, a cool drink will also always be available.

It has long been known that beneficial trace elements disappear from water during boiling. The cooler does not allow the liquid to boil, it heats it up to a temperature of 95 ℃. It is also profitable to install equipment. Its cost will more than pay off when you do not have to pay for the electricity consumed by the same electric kettle. The device itself consumes no more than one kilowatt. The question arises: how to choose a high-quality and reliable device? What should you pay attention to? What mistakes can a buyer make when choosing?

The editors of the site "bestx.htgetrid.com/en/" analyzed the popular models and made a rating of high-quality outdoor water coolers for 2020. The article also describes the best manufacturers, tips and tricks to help you find a dispenser that meets all your wishes.

What is a floor standing cooler

A floor-standing cooler is a device that heats or cools water, allowing the consumer to use cool or hot liquid at any time. The multifunctional device was invented at the beginning of the last century by Halsey Taylor. Since then, a huge number of manufacturers and unit models have appeared.

The advantage of the floor-standing device is that it has extended functionality: it not only supplies water at the right time, but also hides dishes and household accessories behind the doors of the built-in cabinet. There are also types of appliances equipped with a refrigerator. There are accessories to make the cooler even more functional. And the modern design of many models provides an organic combination with the rest of the interior items. The device works quietly. Ideal for offices and public buildings.

Types of floor appliances

The answer to the question of what units there are can be as follows: with different types of loading, cooling and additional equipment.

Let's take a closer look at each type:

• The plastic bottle can be loaded both from the bottom and from the top. Located at the bottom, it hides in a special closet. The cost of a bottom-loading device will be higher. But this type is more practical.
• There are also flow-through coolers, the source of water for which is the water supply.
• Cooling option. If this process takes place at the expense of a compressor, the device should be transported and maintained exclusively in an upright position. A standard unit is capable of cooling about three liters of water in one hour. The electronic type is less powerful, its performance is lower. Less and cost. The air temperature in which the device heats and cools the liquid should not exceed 28 ℃. There are no restrictions on the method of transportation.
• Refrigerators, storage cabinets can be used as additional equipment. Their cost is higher than the price of a model without accompanying functions, but the benefit from such a purchase is greater.

Coolers can also be multifunctional and have the following options:

• Refrigerator. Great solution for containing milk, cream, sandwiches and other snacks.
• Integrated glass holder.
• Teapot. The liquid cannot be heated to a boil. The manufacturer Ecotronic has taken care of those who are used to brewing tea or instant meals with boiling water.
• Ice maker.

Appliances can also be carbonated. Will give a lot of pleasant sensations for those who love carbonated drinks. And the device with a cabinet will conveniently place all the tea accessories.

Specifications

In order for the comparison of one model with another to be effective, you need to understand what properties the device has, and how they affect its performance.

The technique has the following characteristics:

room	Characteristic	Decoding
1	Control method	It can be mechanical or electronic. The first is usually more affordable. When choosing, it is worth starting from personal preferences and from the visual effect.
2	Water supply method	It can be arranged through removable bottles or through a cold liquid plumbing.
3	Loading type	Top or bottom. It will be easier for a team of women to change the bottle if it is located at the bottom, since it does not have to be lifted. The bottom loading is also the most aesthetic: the bottle is hidden behind the doors of a special compartment.
4	Profitability	How much electricity is spent on its operation.
5	Cooling type	Compressor or electronic. The first is the most powerful and productive.
6	Safety	It is important that the design of the device is designed taking into account protection against current, contamination by microbes. Many models have a “child lock” function on the hot water tap. The material from which the device is made must be of high quality and durable.
7	Design	There are the most simple devices in external design. There are models that have been developed hand in hand with designers. They will perfectly complement the interior in the loft, high-tech, modern, etc.
8	The cost	An important aspect, which is influenced by belonging to a certain brand, design, additional functions, dimensions of the device and other characteristics.

Advantages and disadvantages

A home cooler has a number of functions that make life more comfortable. To make the right choice, it is important to analyze its positive and negative aspects before making a purchase.

Advantages:

Disadvantages:

How is a floor-standing water cooler

A floor-standing cooler is a rather large device in the form of a parallelepiped, less often a cylinder, up to 120 cm high, if you do not take into account the size of the bottle. The installation of a conventional device is quite simple. He needs to allocate a place of approximately 45x45 cm and provide access to the outlet. How to install the dispenser can be found in the instructions. To understand which unit is better to buy, you need to understand how it works and what to look for.

If you start examining the cooler from above, you will notice that it is equipped with one, two or three taps.One of them is set for hot water, the second for cold water, and the third for room temperature water. The liquid is supplied by pressing on the petal with a circle or on the touch button with your finger. Premium models are most often equipped with touch buttons. Budget ones supply water in the first way.

For top-loading applications, the bottle must be turned over and placed in the recess with the pin. Gravity acts on the water and makes it flow into the glass. The dispenser can work without electricity. When the load is at the bottom, an electric pump is needed to supply liquid to the tanks. Accordingly, the device is useless without an outlet.

On the back side, the cooler can be smooth or have a built-in fan. Visually, this is what distinguishes the compressor type of the device from the electronic one. The first type contains a compressor inside that pumps refrigerant (R134a freon). The device works on the principle of a conventional household refrigerator. Its main features are that the water in it cools down to 8 ℃, has a significant weight (up to thirty kilograms), is not as quiet in operation as its electronic counterpart.

The second type is equipped with an electronic board. It works due to the property of materials of different conductivity to change the temperature under the influence of current. These fixtures are inexpensive. The water temperature in them does not drop below 12 ℃.

The back or side panels can also be equipped with toggle switches. If they are not there, then the device will be able to provide a drink only at room temperature, it does not need an electrical connection. If there is only one toggle switch, the cooler is only heated. If there are two of them - with heating and cooling. Functions that are not currently needed can be disabled.

The fact that the device is plugged in and ready for operation is indicated by a light indication. The easiest option is two or three LED bulbs. There may be an LCD monitor indicating active modes. It also allows you to set the mode, adjust the energy saving, set the water temperature.

Coolers with a refrigerator have a lower cooling capacity. Conventional ones cool 2.5 liters per hour on average, a device with a refrigerator - no more than 2 liters. If the team is small, this will be enough. You can safely choose a kitchen cooler with this option, it can safely provide drinks to all family members. A small puddle of liquid may sometimes accumulate under the device. It doesn't have a No Frost system. When opened, warm air enters inward, condensation forms.

How does a flow-through cooler work?

The flow-through dispenser or purifier is quite simple. For it to work, it must be connected to the water supply. The equipment perfectly copes with water purification from:

• mechanical impurities,
• heavy metals,
• organic compounds,
• chlorine,
• magnesium and calcium salts.

Advantages:

Disadvantages:

Performance

A variety of selection criteria are described above. Performance is one of the most important. In the technical description, you can find indicators of heating power, hot water output (liters per hour) and the volume of the heating tank.

If the equipment is designed for maximum heating of water to a temperature of 95 ℃, then the liquid in the circle will be 5-6 ℃ lower. It is also worth remembering that the cooler does not allow you to drain all the hot water. If the tank holds one liter of liquid, after two cups of hot drink you will have to wait a few minutes until the newly supplied cold water heats up to the desired temperature.

Below are the characteristics that buyers believe are the most successful:

1. a liter tank for hot water, heating power: five hundred or seven hundred watts, productivity: five or seven liters per hour;
2. three-liter hot water tank, heating power: five hundred or one thousand watts, productivity: seven or ten liters per hour.

A large tank can brew more cups of coffee or tea at a time. And the heating power is responsible for the number of heated liters per hour.

Accessories

It will not be superfluous to purchase accessories that will make the use of drinking water technology even more comfortable.

The glass holder will prevent clutter. A good way to keep disposable cups in one place.

A rack for storing bottles will allow you to conveniently place containers. Organizers are available in different sizes and designs. Metal structures can accommodate from three to twenty-four bottles.

Reinforced plastic bottle carrying handle. It will seem especially useful in winter, when low temperatures make the container with water slippery. As a result of the fall, a crack may form, and after a leak.

Service

The fact that the cooler uses bottled water may suggest that it does not need to be cleaned. But this judgment is wrong. The visible parts of the dispenser become covered with dust, the taps become dirty, and the drip tray fills. Limescale builds up in the hot water tank. Please contact technical support once a year. A specialist will come home or to the office and carry out a complete cleaning of the internal system, flush the equipment outside, taps and carry out antibacterial cleaning. Water will always delight you with cleanliness, and the cooler will have a long service life.

Rating of the best outdoor devices

Below is a summary of the best floor standing dispensers. The popularity of models is made up of customer reviews, characteristics, usability, cost.

Best floor standing dispensers for 2020

Vatten L45WE / L45SE / L45NE

This model has the best reviews. This is a floor-standing dispenser with electronic cooling and bottom bottle installation. There is a 1.1 liter hot water tank. Its heating capacity is 650 watts, and its cooling capacity is 70 watts. Protection from children is provided. There is a third tap that supplies water at room temperature. Average price: 9 500 rubles.

Advantages:

Disadvantages:

Ecotronic H1-L gold

The beloved dispenser with cooling and heating. Equipped with a compressor. Heating power - 500 watts, cooling - 100 watts. Has a capacity of hot liquid 5 liters per hour, cold - 3 liters per hour. The unit weighs almost 13 kilograms. To put the device into operation, you need to press the key with a circle.

Advantages:

Disadvantages:

HotFrost V450ASM

The compressor-type cooling device has a high performance. The heating power is 650 watts, the cooling power is 100 watts. The hot and cold liquid tank is made of stainless steel, the volume of the first is 1.3 liters, the second is 3.6 liters. The dispenser has a significant weight - about 18 kg. Using the device is simple and pleasant: just press the touch button with your finger. Water supply at room temperature is possible. Has one tap. Average cost: 23,500 rubles.

Advantages:

Disadvantages:

Ecocenter G-F4EC

Dispenser with electronic type of cooling and upper bottle installation. With a heating function with a power of 500 watts, a cooling power of 75 watts. Many people buy it for the kitchen. It is popular due to its low cost. Voditsa is supplied through the operation of the "keys". Average price: 4 990 rubles.

Advantages:

Disadvantages:

Vatten V46WKB / V46NKB

Floor standing dispenser with compressor type of cooling. The bottle is placed on top. Has a fairly high heating power - 650 watts, cooling - 120 watts. Equipped with a storage tank and three taps. Average cost: 10 681 rubles.

Advantages:

Disadvantages:

Vatten L49QEAT

Compact floor standing unit with electronic cooling type. There is heating with a power of 1350 watts, the cooling power is 70 watts. Low height - 83 centimeters. Equipped with a storage tank. One tap serves hot and cold drinks. The two kettles on top will help you quickly boil water and brew tea. Average cost: 14,230 rubles.

Advantages:

Disadvantages:

AEL HC-66L

The device has a compressor type of cooling. Vodica heats up to 94 ℃, cools down to 10 ℃. Has a hot drink capacity - 5 liters per hour. The heating power is 500 watts, the cooling power is 100 watts. There is a storage capacity. The dispenser works by pressing the keys with a mug. Average cost: 14 400 rubles.

Advantages:

Disadvantages:

Best floor standing flow dispensers for 2020

A review of the best flow-through coolers will help you decide and purchase the necessary and useful unit for any home and office.

Ecotronic M15-U4LKEM black-gold champagne

The purifier is connected to the water supply system and cleans, heats and cools the water. There is a UF filtration system. It can be used by up to 20 people at a time. Has an electronic type of cooling. The unit weighs 21.2 kilograms. Has a 1 year warranty. Powered by pressing with a mug. Average cost: 28 300 rubles.

Advantages:

Disadvantages:

LC-AEL-610S

Compressor-cooled purifier. Cools down to a temperature of 5 - 10 ℃ two liters per hour. The volume of the tank is 3.6 liters. Heats water up to 95 ℃ in a 1 liter tank. Heating power - 420 watts, cooling - 85 watts. There is a UF filtration system, a four-stage purification system. The device can be used by ten people at a time. Powered by pressing a mug. Weighs 13.5 kilograms. Average cost: 14,500 rubles.

Advantages:

Disadvantages:

To understand where to buy a dispenser, which company is better, you need to carefully read the rating, compare prices in different stores and their distance. You can make it easier - order a device for the uninterrupted supply of clean drinking water via the Internet.