The best storage water heaters for 2020

The hot water shutdown in 2020 puts some apartment owners in an awkward position. Of course, you can wash your face for work, but it takes a lot of effort to take water procedures. And here the owner of gas boilers is most fortunate, because they always have access to warm and pleasant water. However, not everyone is ready to "bother" with the installation of such equipment. For this reason, the editors of the site "bestx.htgetrid.com/en/" have prepared for you a rating of the best storage water heaters for 2020, which will provide the owner with hot water at any time.

What it is?

Summer is a great joy for every Russian person. After all, for half the vacation begins, for which they saved up funds for a year or 6-8 months. But not everyone will go on a long-awaited journey. Unfortunately, modern realities cannot allow this, because the work never stops.

While some are resting and sunbathing, others are faced with typical problems characteristic of this period. Most of all people are annoyed by switching off hot water for 2 weeks. Although most of them are knowingly informed about this, a lot of discontent is still expressed. The situation is no better for the owners of the dacha in the countryside, where hot water is as rare as ball lightning.

All these problems can be solved by purchasing a special water heater. There are two types of them in total: flow-through and storage. The main principle of operation of the first option is the passage of water through the heating element, where it reaches a certain temperature (in some models, the user independently selects the required value) and is supplied through the tap. These are good and efficient devices that will take up a minimum of space and will be useful. However, they have one big drawback: instantaneous water heaters work only with small volumes. Therefore, if a person needs to provide himself with a large amount of liquid, it is better not to consider this option. Of course, there are models that are able to satisfy the owner, but they require more power (about 8 kW), and not every wiring will withstand this.

As for storage devices, the device itself is very simple. It consists of a standard tank, where cold water enters, a special heating element (ten) is placed inside the tank, with the help of which it is heated to a temperature set by the user. In addition, if the water cools down, the device automatically heats it up to a certain value, which is a convenient solution. And in order for the liquid to cool twice as slowly, the manufacturer place solid foam between the tank and the outer wall, which does not allow the temperature to drop.

The buyer will find such devices in any online and standard stores at an affordable price and an average power of 2-3 kW. For this reason, it is important not only to find a beautiful device, but also to calculate the appropriate value.So if the user needs to heat 60 liters in a short period of time, then the ideal option is a device with a power of 2 kW.

What are the types of storage water heaters

In total, there are two types of capacitive devices on store shelves: those powered by gas or electricity.

The second option is more common, so you can find it in almost every region. It has a simple device: it consists of a container, which is located inside, a heating element, with the help of which heating is performed, a magnesium anode (it does not provide a favorable environment for corrosion), a heat-insulating element, an outer case, a device that maintains a set temperature value - a thermostat, and also a special valve (its purpose is to bleed the pressure limit value).

Such devices differ from each other both in power and volume, as well as in the substance of which the thermal insulation consists. Common options that manufacturers often use are polyurethane, polyurethane foam (PPU) and mineral wool, consisting of natural elements. In addition, a lot of attention is paid to the tank coating and placement. Also, there are models on the market that can work with the "smart home" system.

Unfortunately, gas storage products have not become widespread in Russia, although they are much more practical and cheaper to operate, since gas is several times cheaper than electricity. Such devices have two types of gas chambers: open and closed. When it comes to the installation of such devices, the second type is in great demand, since its installation does not require a chimney and additional air that would support the combustion process.

What to look for when choosing a product

In order not to overpay for extra functions or volumes when you come to the store, it is important to know what you need to pay attention to first. So a person learns the necessary information and spends a minimum of time.

Power

This is the first and most important parameter worthy of attention. She is responsible for the speed of heating the water. But there is one caveat, the larger this value, the more demanding the device is for wiring. Therefore, in order to install such a device, it is necessary to provide it with a separate connection, where its own fuse will be located. So the user will completely protect himself from possible malfunctions. But this requirement is relevant only for owners of an instantaneous water heater, since storage models have a capacity that does not exceed 2.5 kW / h. Of course, you won't be able to heat up 4 liters per minute, but storage products are placed both in fashionable new buildings and in old country houses that were built in the middle of the 20th century. In addition, they have increased security.

Place and purpose of operation

This is also an important point, since it will allow you not to overpay for extra liters and opportunities. Because if a water heater is needed only for an emergency, for example, turning off hot water in the summer, then it is better to buy simple models that do not stand out for high functionality.

Tank material

Given this parameter, the user will protect his device from corrosion in the future. A suitable solution is a water heater made of stainless steel. But because of this, the cost of the product increases several times. However, the most expensive are models equipped with a titanium coating, in addition, the warranty for such devices exceeds 5 years, which shows the owner the manufacturer's confidence in his product.

There are also products that have enameled tanks and glass-ceramic - this is the best option for those who are going to rarely use devices. The cheapest option is a plastic coated container, this model is intended for those who do not care about quality.

Unfortunately, even the titanium coating will wear out over time, which is normal.Because this is influenced by dozens of factors that cannot be controlled: temperature drops, accidental mechanical damage, which does not even depend on a person, but arises inside the container by a natural process. So, for example, the formed scale peels off the walls and begins to scratch the surface. But the most vulnerable point is the welding seams, because, as practice shows, frequent formation of rust occurs precisely in these areas. However, progress does not stand still, and now it is enough for a person to buy a device with a rod-anode, and the problem with corrosion will not cause a headache.

Control methods

In 2020, most models are equipped with electronic control, which is many times simpler than hydraulic, but the latter option is still used in budget models. The first type is very easy to use, so the owner needs to set a certain temperature value, and the unit will automatically maintain it throughout its operation. In addition, such models are in demand because they are able to independently diagnose the system after switching on and issue an error code on the liquid crystal display, which is a very convenient solution for beginners who are not familiar with the principle of operation of each element. Its opposite version functions according to a different principle: after opening the tap and the appearance of pressure, the device starts the heating process. For greater reliability, a special limiter is installed inside that will not allow the temperature to rise above the set value. Now such models are a rarity, but their reliability is much higher than that of modern copies.

Heating methods

In total, there are two known methods for heating a liquid in a tank: using a tubular electric heater or a spiral element. The first option is inferior to the last one in terms of heating rate, but its maintenance seems almost impossible for an inexperienced user, in contrast to the heating element. It is also easier to replace the tubular heater in the event of a malfunction.

There are water heaters that are equipped with two heating elements. Such products are useful in that, thanks to this, a function of high-speed heating appears to the limit value,

Rating of storage water heaters of the best manufacturers

Edisson ER 50V

Ease of use, low cost and reliability are the key features of this device. Its tank volume reaches 50 liters, which is enough for those who install the unit “just in case”. The power consumption also does not stand aside and is 1.5 kW, so heating the water will not take much time, but you still have to wait. The maximum temperature is 75 degrees. The output pressure is from 0.5 atm and up to 6 atm.

The device is controlled mechanically. The display indicates the current state of the water heater. There is protection against overheating and corrosion, this will prolong the performance of the device several times. The inner lining of the tank is glass-ceramic. It takes an hour and a half for the water to heat up to its maximum value. The manufacturer extends a one year warranty.

The average cost is 3,400 rubles.

Advantages:

Disadvantages:

Hyundai H-SLS1-30V-UI705

The aesthetic appearance makes the model unique. A water heater from the Alto series will impress the owner with its compactness and good performance for several years. Its diameter is 28 cm, and its height is 77 cm, which makes it possible to place it almost anywhere.

The product is intended not only for use in a certain period, its technical characteristics allow you to operate the water heater daily and without problems. The advantage of this option over competitors from the same price segment is the presence of a tank made of stainless steel. This is a guarantee of reliability and quality.Therefore, the product has a high resistance to corrosion, which makes it possible to use it in places with aggressive water.

The average cost is 6,300 rubles.

Advantages:

Disadvantages:

Electrolux EWH 50 Magnum Unifix

A popular household appliance manufacturer that has won the trust of millions for its quality products. The model is no exception and has good technical characteristics, among which it stands out: low power consumption equal to 1.5 kW, the presence of a thermometer, convenient operation and 4 degrees of water protection.

The product is slightly larger than the representative that was described above, but this is due to the capacious tank, designed for 50 liters. Moreover, the maximum weight is 18.3 kg, which opens up the possibility of easy installation. Users like not only the characteristics of the Electrolux EWH 50 water heater, but also its universal location. The product is installed vertically or horizontally, which will not reduce the area of ​​useful space.

The average cost is 5,870 rubles.

Advantages:

Disadvantages:

Ariston ABS ANDRIS LUX 6 UR

This equipment has practically no drawbacks. Yes, a small capacity of 6 liters will have a significant effect during operation, but if we consider that this is enough for some users, then such a product is a real find. All the classic functions are present here, which are distinguished by their efficiency.

To achieve greater safety, the manufacturer provided the water heater with a safety shutdown function, which will not allow harm to a person with an electric current. The advantage of the model is the tank coating, which is made of titanium enamel. There are 5 degrees of water protection.

The average cost is 3,300 rubles.

Advantages:

Disadvantages:

Thermex Smart 50 V

The modern design and convenient operation will win the user's attention. If a person is looking for a water heater for daily use, then the Thermex Smart 50 V model deserves attention.

The volume of the tank is 50 liters, which is enough to get an almost uninterrupted water supply. The power consumption of the product will be 2 kW, but there is also a mode that only uses 1.3 kW, making it an economical solution. The maximum heating is 75 degrees. The lining of the inner tank is made of stainless steel. To ensure the safety of the owner, an RCD is present.

The average cost is 12,000 rubles.

Advantages:

Disadvantages:

Gorenje GT 10 U

Not everyone has an urgent need to buy water heaters for 50 or 30 liters, it is important for them to have a product with a small capacity, but high efficiency. The Gorenje GT 10 U model will satisfy their request completely, because the tank capacity is 9.9 liters, therefore the dimensions are 350x500x265 mm, which makes it possible to install the product at any point.

It only takes 22 minutes to heat the water to its maximum temperature, which is also an added benefit. There is overheating protection, frost prevention, safety valve. Therefore, the water heater is reliable and durable.

The average cost is 4,100 rubles.

Advantages:

Disadvantages:

Hyundai H-SWE4-15V-UI101

If the previous version is not particularly impressive with its characteristics, then this one will fix such a mistake. The water heater is produced by a branded company that is heard not only among Russians, but also among Europeans and Americans. Its tank volume is 15 liters, washing a stack of dishes and then taking a shower becomes an opportunity, not a fantasy.

In addition, the maximum power consumption is 1.5 kW, which is an absolute savings. Management will not cause difficulties even for a person who is far from such technology, and his safety will allow him to sleep soundly without worrying about a malfunction.

The average cost is 5,000 rubles.

Advantages:

Disadvantages:

In custody

Safety precautions should never be forgotten, and the installation of an electric water heater is no exception. Before installation, it is important to make grounding, check the wiring and not place the device near heating equipment. If you have experience of using storage water heaters described in the rating, or a more interesting model, tell us about it in the comments.