🏍️Best City & Travel Motorcycle Jackets 2020

Many motorcyclists are involved in road accidents every year. Over 50% of accidents tragically end lives, about 30% turn people into disabled people, and only 20% of riders get off with fear and the ability to draw conclusions from the situation. Wearing motorcycle equipment allows you to increase survival on the road. For most, it is limited to only one helmet... This decision is fundamentally wrong.

The motorcycle jacket is the main component of the equipment, as it covers the maximum body area. The safety of the rider depends on its quality.

What should be a motorcycle jacket

Based on the main task of protection, certain requirements are imposed on it:

• back, chest, elbow, and shoulder protection. They are located in strictly designated places and do not slip when moving;
• resistance to abrasion when sliding on asphalt;
• waterproof and windproof;
• stylish comfortable and comfortable.

Regardless of the price and quality of equipment, there are leather and textile jackets. For several decades, there has been a debate among the adherents of the groups which is better. There is no single answer to this day. Each has both its own irrefutable advantages and disadvantages.

Leather Motorcycle Jackets

The classic version. They have existed almost since the advent of motorcycles. It is characterized by such qualities as high wear resistance and strength. Cow leather is used as raw material. It is durable, will resist scuffs and tears. A high level of protection is achieved not only due to the thickness of the raw materials. The cut and the quality of the stitches play an important role. This is due to the fact that to ensure safety, it is necessary that not only the material itself, but also the seams themselves, withstand the blow.

Leather allows you to start the motorcycle season earlier than others and end it when the adherents of textile have long ago put their iron horses to hibernation. They will warm you on a cold day when moving in the off-season and protect you from headwinds.

But it must be remembered that movement on a hot summer day will be significantly complicated. Compared to textiles, leather does not breathe. As a result, a comfortable ride is not possible. If you do not get rid of the jacket in such weather, the motorcyclist may even feel bad.

There are two types:

• classic. Straight fit and leather jackets for city traffic. Well known to all fans of feature films, it is in this kind of jackets that bikers are portrayed driving around the city on majestic choppers and cruisers;
• sports. Specific products not intended for everyday use. They have special curved sleeves and in some cases an aerodynamic hump on the back.

Advantages:

Disadvantages:

Textile Motorcycle Jackets

For its manufacture, modern materials are used that compete with leather and even surpass in certain moments. These include: kevlar, ballistic nylon, carbon, etc. Natural materials are practically not used. Despite this, all products are waterproof and breathable. Thanks to special ventilation ducts, they will be comfortable not only on a hot sunny day, but also in bad weather. Removable liners allow you to use the jacket in the cold season. They have bright and original colors. Protection and foam are placed in critical areas without losing design. Manufacturers do not stop there and every year they improve their products, making them less bulky and more secure.

They share:

• Autumn. Equipped with a special thermostat. The equipment is reinforced in vulnerable places and withstands falls on ice and more. This jacket has many pockets and special inserts on the elbows.
• Summer. They are characterized by a lightweight design, mesh inserts and ventilation ducts. Due to this, the motorcyclist feels comfortable on a hot summer day. Many models are additionally equipped with raincoats.

Advantages:

Disadvantages:

Manufacturers place protective inserts on the shoulders and elbows to preserve the joints and, in some cases, on the chest and back. Inserts of plastic, film and metals, and modern materials such as D30 can be used as material. An innovative design that is flexible and flexible at low speeds, without restricting movement. The situation changes dramatically at the moment of impact, the molecular structure becomes denser and absorbs the kinetic energy released at the moment of collision. D30 withstands multiple accidents, does not leak water and does not burn. Replace every 3 years.

Turtle

Many riders use a turtle as an additional piece of protection worn under a jacket. It is a comprehensive protection of all vulnerable points on the body, including the neck and collarbone, which is fixed on elastic tissue. The combination allows for maximum security.

May be used separately in combination with jersey and lightweight mesh jackets in extreme heat. You should take care of your safety when riding in a jacket is unbearable.

Wearing a turtle under normal outerwear is contraindicated. The equipment has a special design and was cut using special wear-resistant materials that can withstand sliding on asphalt with minimal damage.

How to choose

The purchase should not be taken lightly, the survival rate after an accident depends on how correctly the choice is made. Regardless of the price, there are a number of factors to consider.

1. In what conditions will it be used. It is necessary to focus on the degree of protection against impacts. The city jacket is not too protected, but due to the abundant number of pockets, additional elements can be inserted. For those who cannot imagine their life without travel, it is necessary to pay attention to the corresponding products. Textile is more suitable here. This is due to the fact that such driving is fraught with frequent exposure to rain. The leather cannot withstand high humidity.The waterproof membrane and water-repellent coating make textile jackets the best in the field. The highest degree of protection for sports. Since their owners mostly drive at top speeds.
2. Climate features and personal preferences in the opening of the season. Those who go on the road in early spring should give preference to leather jackets. This is due to the fact that the skin retains heat and protects from the wind. Those who live in warm regions, which are characterized by hot and sunny summers, will love textiles. For the autumn-spring period, high resistance to winds and precipitation is relevant.
3. Stocking density. It is as dense as possible. The aerodynamic properties depend on this, which play a decisive role for safe movement. The jacket fits snugly on the rider, but does not hinder movement. It is comfortable in it. The protective elements are located strictly in the appropriate places. The jacket is bought only after a detailed fitting. For travel, they have a loose fit, but due to special tightenings during high-speed driving, air does not get inside. Zippers at sleeves and waist make it easy for riders to remove themselves.
4. Determination of the size. To do this, you need to measure your waist, chest and sleeve length. To obtain the data, the breasts are wrapped with tape at the widest point. The tape lies flat, parallel to the floor, distortions are categorically excluded. The posture is straight, the rider from which the indicators are taken is as relaxed as possible. The waist is measured in the same way. To obtain the necessary data on the sleeve, it is necessary to attach the tape to the collarbone and draw it along the shoulder to the lower part of the wrist. The arm is slightly bent. Based on the results obtained, check the size table.

Men's sizes
International size	XS	S	M	L	XL	XXL	XXXL
Russian size	44	46	48	50	52	54	56
Height, cm	160-170	160-170	165-175	165-175	170-180	170-180	170-180
Chest girth, cm	82	86	90	96	104	110	114
Waist girth, cm	60	68	74	80	88	94	above 94

Women's sizes
International size	XS	S	M	L	XL	XXL	XXXL
Russian size	42	44	46	48	50	52	54
Height, cm	160-170	160-170	165-175	165-175	170-180	170-180	170-180
Chest girth, cm	84	88	92	96	100	104	108
Hip girth, cm	88	92	96	100	104	108	112

Best City & Travel Motorcycle Jackets 2020

Fly racing aurora

A bright and stylish representative of the budget line. The winter waterproof textile jacket is designed for use in the city and beyond. The material is wear-resistant 450D polyester and Hydroguard rain protection. Moisture resistant membrane protects against headwind flows. The fabric overlay covering the zipper serves the same purpose. Heat insulating microfiber lining for a comfortable temperature. Logos act as reflectors.

Advantages:

Disadvantages:

INFERNO DARK INFLAME

The jacket of the domestic manufacturer INFLAME is aimed at consumers who mainly move around the city in summer. Comfortable fit, flawless design with leather inserts. The updated DARK model has received a water-repellent mesh WATERPROOF MESH. Due to the zero surface tension, the rider, when exposed to rain, has time to find cover before he gets wet.

Inferno ventilated polyconstruction protects against moderate impacts. Protective inserts made in South Korea by HEX have European certification EN 1621-1. They are flexible and not weighty; they are practically not felt when worn. Adjustment to the figure is available.

Advantages:

Disadvantages:

First FRM214

One of the best summer solutions. Lightweight breathable material was used in its manufacture. Due to special tightening, it sits tightly on the rider and improves aerodynamic performance.

Advantages:

Disadvantages:

Joe rocket atomic 4.0

The main material for manufacturing is Rock Tex 600 (grained fabric). It is resistant to abrasion and tearing. The fabric is completely waterproof. The innovative VariableFlow ventilation system maintains air circulation and a comfortable temperature even on the hottest days. In rainy or windy weather, they close tightly. The integrated protection will take the blow if necessary.

Advantages:

Disadvantages:

Kawasaki leather jacket

This leather motorcycle jacket from the Italian manufacturer combines sophisticated design and modern technicality. Natural cow leather with a thickness of 1.2 - 1.3 mm took on a protective role. Built-in protectors on the shoulders and elbows are quality certified. The possibility of installing additional protection on the back has been taken into account. Removable inner lining allows wearing even in cold weather.

Advantages:

Disadvantages:

DAINESE 8-TRACK LEATHER JACKET

The versatile jacket has successfully intertwined comfort, high safety performance and timeless classic design. Made from genuine cowhide leather. In it, the rider feels comfortable not only on suburban tracks, but also within the city. Removable lining allows you to wear it all year round. Composite protectors are EN 1621.1 certified.

Advantages:

Disadvantages:

Roland Sands Ronin

Timeless classics. It will not lose its relevance even after decades. The base of the jacket is made of 1.2 mm cowhide. To achieve maximum strength and effectiveness, it was thoroughly washed and waxed beforehand. The extended back area allows you to look good even when riding low on the bike.

Advantages:

Disadvantages:

MOTEQ Bro

The model is a successful combination of strict lines with a classic cut. Cowhide was used for sewing. The motorcycle jacket is compatible with many items of clothing. A detachable thermal vest and mesh lining keep you warm, even on the coldest days.

Advantages:

Disadvantages:

JACKET KLIM KODIAK

Those who cannot imagine their life without travel will love this model. It brings together the best of what an elite German brand specializing in long-distance travel has to offer. One of the best textile jackets.

Advantages:

Disadvantages:

The jacket not only protects the biker from possible accidents on the road, but also acts as an important element that complements the style. It will emphasize the character of the driver.

We recommend buying motorcycle jackets only in specialized online and offline stores. In them you can find quality original certified products. A wide range of sizes is presented, and many give a guarantee for their product.