The best light trailers for 2020

Although the trailer is not a primary purchase from motorists, life becomes easier after purchasing it. Most drivers think about the benefits of a trailer when building a summer cottage or moving. Thanks to him, you can move household appliances, furniture or a vehicle (ATV, scooter, etc.) in the shortest possible time. If a person decides to purchase a device, it is necessary to carefully approach the choice. The reliability and durability of the purchase depends on this.

The editors of the site "bestx.htgetrid.com/en/" have prepared for you a rating of the best light trailers for 2020, which will suit everyone.

Purpose of acquisition

When a person chooses a suitable trailer, he cannot rush to buy, first he must decide on the destination.

• What will be transported. Today, structures are sold that are capable of withstanding a load of 500 kg, this allows you to move almost any mechanisms and devices. It's also important to pay attention to the shape. Because when a device is purchased for transporting a vehicle, the space should not remain end-to-end.
• Storage. Most people who buy a trailer spontaneously don't know where to store it. Of course, if you buy a galvanized model or with a protective coating, then this issue is removed. In other cases, you should carefully consider the storage location.
• The intensity of the application. Here the driver needs to choose a good suspension so that the device does not break with frequent use.
• Availability of auxiliary options. Some users need an awning or a jack, as they simplify daily operation, while others may find such solutions unnecessary. This question should also be given a minute of time.

Selection Basics

In order for the device to last a long time and not break down after a year, attention should be paid to key characteristics. Then the structure will serve for a long period and ensure safe transportation.

Overall dimensions

A light car trailer can be purchased online or from various suppliers. However, it is important to pay attention to the dimensions of the entire structure before purchasing. This will determine the roominess. If it is necessary to constantly transport building materials or large electrical installations, the dimensions must meet the requirements. So that while driving, nothing goes beyond the structure, since if improperly fastened or raided a deep hole, some parts may be lost along the way.

When transporting long boards, it is possible to fold the front or rear board. This solution allows you to increase the usable space by 1.5-2 meters, but not more than this value. In addition, the traffic rules do not prohibit the overhang of the cargo, however, it is important to know the permissible value in order not to receive a fine. You can read about this in the corresponding reference book, the main thing is that it should be from the current year, since changes are constantly being made there.

During the transportation of bulk material or motor vehicles, it is necessary to purchase a structure where a dump system is present. Thanks to this function, material or motorcycle can be loaded or unloaded without any problems.

Maximum lifting capacity

Modern trailers are equipped with leaf spring suspension and high-quality damping system. This allows you to transport various devices and equipment, the weight of which does not exceed 800 kg. In addition, some manufacturers produce models that can withstand a ton without any problems, while the technical data sheet will indicate a figure several times less. This solution allows you to keep Category B, rather than open a new one.

The last thing to consider at this point is the load on the trailer. Indeed, while moving, it is subjected to dynamic influence, and not just static. Therefore, it is not worth loading it to the maximum, it is necessary to leave 100-150 kg in reserve so that nothing deteriorates and breaks during the movement.

Corrosion resistant

There are dozens of different models on sale today, but there are only three types of coatings:

• Using a protective paint that increases corrosion resistance;
• Galvanized spraying;
• Dipping the device in a bath of molten zinc. This method is also called hot-dip galvanizing.

The first two options are the most simple in their application, but the third is a complex technological process. This method is considered to be the most effective, since the molten material penetrates into every area and hole, increasing the strength and performance characteristics. Even the inside of the structure will be filled with molten zinc.

Suspension features

Up to 85% of domestic trailers are manufactured exclusively with leaf spring suspension. In the rest, rubber-harness is used. You should know:

• The leaf suspension is easy to maintain and has a smooth ride. In addition, the user can independently strengthen it, for this it is enough to turn on a special video or read step-by-step instructions on the Internet.
• Rubber-harness makes it possible to transport heavy materials and equipment. At the same time, stability is maintained. But not everyone will be able to use it. Also, a suspension of this type should be periodically lubricated with various compounds so that the main components do not crack and serve the maximum period. This must be done, since rubber wears out quickly, and it is one of the main structural elements.

Additional features

Trailers can be equipped with dozens of auxiliary equipment. All of them are intended for just one thing - simplification of operation. So you can install awnings or plastic boxes, with different heights. Some models support the possibility of mounting a mechanical winch or installing a slipway for transporting boats.

But most of the users do not understand what is the advantage of such designs, because the trailer can be safely used without auxiliary elements. Everything is simple here:

• Thanks to the awning, it becomes possible to transport cargo in any weather. It also protects the internal contents from theft. After all, before you know what is inside, you need to untie it, and this takes time. Upon completion of use, the awning can be easily removed and folded into the trunk or trailer. There are models that have a special bevel. This solution reduces fuel consumption during transportation.
• Plastic roofs are considered reliable and more practical. They are made of durable acrylic, therefore, they have high performance and protect transported products and materials from rain, snow, UV rays, etc. The advantage of this option is the presence of gas shock absorbers, which makes it possible to raise or lower the roof without any problems.
• A slipway for a boat can be installed in almost any design. The device is a square frame, which is equipped with two cradles.Installation takes place inside the trailer, after which the boat is fixed. This solution will allow fishermen to save on the purchase of a special device for transporting such equipment.
• The winch and jacks are essential for people who constantly load or unload various materials. Some models already have similar mechanisms, so if the driver requires this function, it is better to buy them.

What to look for and correct operation

Once there is a general understanding about trailers, you need to think about the return on investment of the product, especially if it is purchased commercially. You can buy a branded model, but as customer reviews show, this is not always a 100% quality guarantee.

• When choosing between galvanized and painted, it is better to give preference to the former. Although the cost is slightly higher, the driver can easily store the trailer outdoors and in the rain. The chance of corrosion formation is minimal, unlike painted ones.
• The technical data sheet says a lot, but if it is possible to check the device yourself, then it is better to do this first. Particular attention is paid to the paintwork and the working condition of the locks. Most of the negative reviews are associated with these components.
• For bulk materials, they buy exclusively products with a dump body, it will greatly simplify the operation of the device.
• When buying, you need to drown from the seller about the possibility of repairing in case of breakdown. Auxiliary parts and accessories are also allowed. At first they may seem unnecessary, but when needed, they will be at hand. Therefore, a person does not have to go to the store to buy them.

The main selection criteria include:

• Removable drawbar. This function contributes to convenient storage of the trailer in confined spaces.
• To move the trailer quickly, a support wheel must be present.
• The presence of folding sides.
• Possibility of installing an awning or a plastic box.
• The type of material used.
• What kind of suspension is used.
• The reliability of the depreciation system.

Rating of quality cheap models

SLAVICH 203 DUMP

A simple single-axle trailer designed to transport household appliances or building materials. The device is partially galvanized, and in some places it is treated with a special protective coating. This solution allowed to reduce the cost while maintaining operational characteristics.

The maximum lifting capacity is 550 kg, which is the normal solution for domestic use. There are no accessories included. The device is fully repairable; if desired, a person can independently strengthen the structure.

Sold at a price: from 31,000 rubles.

Advantages:

Disadvantages:

Titanium 1713-03

A small device that has the function of opening two sides, which significantly increases the capacity. In some stores, the structure is sold with an awning, which increases its functionality. It is made of quality materials that have a long service life and are resistant to corrosion.

Thanks to this model, the user will be able to transport long boards with maximum convenience. The dimensions of the product are compact, which allows you to store it in a small room.

The average cost is 31,000 rubles.

Advantages:

Disadvantages:

"Flint" 1.65x1.29 ST

The trailer has a leaf spring suspension and a carrying capacity of up to 560 kg. The type of drawbar used is V-shaped. The sides are made of galvanized steel, which increases the service life and reliability.However, a special protective compound has been applied to the floor and some internal components to increase corrosion resistance. Its only drawback is that over time it flakes off, making these parts vulnerable. To prevent this from happening, the user needs to periodically change the paint.

The average price is 27,000 rubles.

Advantages:

Disadvantages:

Rating of the best models of the middle price category

Expedition Station Wagon 3250

Quality device with A-shaped drawbar. To increase the performance of the frame, a hot-dip galvanized method was used. The sides are made of galvanized steel, 1.5 mm thick. The trailer is covered by a one-year warranty. The set includes 2 rear lights and 2 side lights.

The type of suspension used is a spring suspension with telescopic shock absorbers. The maximum carrying capacity according to the passport is 455 kg, which is the standard for light trailers. The floor area is 4.9 square meters. There is no braking system.

The average price is 70,000 rubles.

Advantages:

Disadvantages:

МЗСА 817701 OFF-ROAD R-16

Reliable device with a sturdy frame and reinforced bearings. The galvanized axle is designed for a load of up to 1300 kg, but the maximum carrying capacity according to the passport is 485 kg. For added convenience, the front and rear sides can be easily folded back. The body is dumped, which simplifies the loading and unloading of materials or equipment. The bottom is made of laminated plywood.

Sold at a price of 64 800 rubles.

Advantages:

Disadvantages:

KREMEN 3000AS

Quality model with awning included. The product has a good carrying capacity, thanks to which almost any building material can be transported. Easy movement is provided by a support wheel. The damping system is made with high quality and reliable. To increase resistance to the corrosion process, the manufacturer used the hot-dip galvanizing method.

The average cost is 60,000 rubles.

Advantages:

Disadvantages:

Top popular premium trailers

Love 81012A R-14 Body

An excellent model with a plastic body, which guarantees the safety of the transported products. The trailer is made of quality materials that can withstand high loads and do not deform. The damping system is reliable and, if used correctly, does not require frequent maintenance.

The average cost is 140,000 rubles.

Advantages:

Disadvantages:

МЗСА 831134.102

A quality trailer equipped with an aerodynamic tarpaulin. The type of suspension used is rubber-braided, which will be a disadvantage for inexperienced users, as it requires careful maintenance.

There is a braking system that simplifies transportation and increases safety. The trailer is made of high quality materials that can withstand high loads. The front and rear sides are reinforced with plywood.

The average cost is 156,000 rubles.

Advantages:

Disadvantages:

Finally

The trailer will always come in handy. Thanks to him, the transportation of any items is simplified. But before buying, you should carefully study the main elements so that the structure lasts longer and does not require constant maintenance. If you have experience using the models described in the rating or more interesting representatives, tell us about it in the comments.