Best edge routers for 2020

The quality of wood processing depends on the experience of the carpenter and the list of tools used. A plane and a chisel are important in the process of work, but we must not forget about modern devices that will make operations simple and will not take time and effort. The editors of the site "bestx.htgetrid.com/en/" have prepared for you a rating of the best edge mills for 2020.

general information

The product is an apparatus powered by an electric motor. Power is supplied from a single-phase network, but in some cases the use of rechargeable batteries is allowed. The collet is fixed on the shaft of the electric motor; it is necessary for tight fastening of cutters and drills. With an unusual design, the product is installed at right angles, with the ability to control the rotating head. Thanks to this option, a person independently controls the depth of processing.

The milling cutter is used by most carpenters, as it allows a wide range of works:

• Pruning;
• Creation of grooves and splines;
• Drilling;
• Edge profiling;
• Making decorative drawings or inscriptions on the surface;
• Thorns cutting.

The milling cutter can replace dozens of hand tools: from chisels to saws. Of course, this will help save money, but you cannot use this device alone, it can become an auxiliary solution, but not a full-fledged alternative. However, some carpenters, when arranging workshops, are one of the first to buy such equipment, together with an electric plane and circular.

Types of milling cutters

Tools differ in design and purpose. There are three varieties of this device in stores:

• Upper;
• Keyway (lamellar);
• Edge (also called trimmer).

Top routers placed above the work surface. A rotating cutter is installed in the center for increased ergonomics and tight retention. The product is in demand among professionals, but also beginners do not neglect its capabilities. Using such a device, a person will perform a wider range of tasks. The device is sold in two variations: fixed and submersible, which one to choose - everyone decides based on the processing requirements.

Edge routers... The name of the tool indicates the specifics of the operations performed: it is used for edging and chamfering. The advantage of devices is in their weight, so they are actively used to perform specialized operations. The product is often only used by professionals as it speeds up the processing process. In a home workshop, when you do not need to carry out operations with dozens of workpieces a day, this is a suitable tool.

The last option is keyed... It is rarely found in the collection of private craftsmen. With this tool, grooves are created, which are used to fix the flooring. The device differs from the previous copies in its narrow focus. It is convenient to work with this product and it shows good efficiency during processing, but it is impractical to purchase a key mill for infrequent use.It is better to take an edging model and place it on a milling table, so a person will process the workpiece with the same quality, only he will spend twice as much time, since a double pass is required.

What to look for?

In addition to the structural difference, the stores sell models of various sizes and weights. There are cutters that can weigh 2 kg, and there are 7 or more kg. If the carpenter does not need to carry out complex operations, then it is better to buy a less massive version. It is important to know that when working with hard materials, such a product will periodically stop, which will affect the processing speed. Therefore, experienced joiners avoid such solutions, preferring massive units that will cope with each material in a minimum period of time.

When choosing any router, it is important to look at these criteria:

• Power;
• Rotation frequency;
• Collet used;
• The type of sole fitted.

Power

The performance of the tool depends on this parameter. A good solution is to buy a product with a wattage range of 750 to 1500 watts. The mass of such a device is 4-5 kg. When choosing a product for performing operations with soft woods, budget models are suitable, where the value reaches 750 watts. However, it is important to understand that this product is not designed for more, drywall and wood are the limit of its capabilities. Frequent stops are the main disadvantage of cheap models. This is especially felt when processing a workpiece with a sharp change in the structure of the fibers, for example, when passing through the knot zone.

Heavy models reach a weight of 6 kg, however, the power of such equipment is 2-2.5 times higher. This allows the product to be used for complex operations. Due to the large mass, it will be inconvenient for some people to handle the tool, since this will require a lot of effort. Also, do not buy this option if you plan to use it infrequently.

Speed

The second important parameter is the rotational speed of the cutter. Everything is simple here, the higher it is, the faster and better the working surface will be processed. There are models in stores that can have a speed of both 7000 and 35000 rpm. It is important to remember that in order for high-speed devices to work properly, a person will need to use expensive cutters, since they have high wear resistance, unlike standard models. If you ignore this rule, then the user will be faced with a permanent replacement of this element. In addition, the variant has a high noise level, and when processing wood, an unpleasant sound is emitted, which is similar to a whistle. For some people, this is annoying and affects the quality of processing, so it is recommended to wear headphones.

Collet

The safety of the product depends on the correctly selected collet. It is best to consider models that are made of hardened steel and have a tapered shape. The advantage of this part is that it is easy to replace. Therefore, if a breakdown occurs, then a person can supply a higher quality product that has high strength. It is not recommended to save on this detail.

Sole type

The element affects the quality of the tool stop. In total, there are two types: cast and stamped. The first option has even proportions, which makes it more popular. In addition, the molded sole does not deform over time. However, the cost of such milling cutters is several times higher. In budget models and some specimens from the middle segment, there is a stamping version. The advantage of such solutions is only in cost.

Criteria for comfortable work

Convenience and quality often depend on each other. Therefore, professionals do not forget about this and select a device not only for technical characteristics, but also for ergonomics, as well as some special features:

• Cutter working stroke;
• Built-in high load protection system;
• Ability to connect a vacuum cleaner;
• Smooth start;
• Parallel stops.

Working stroke

This is one of the main parameters that will help determine the choice of a specific model. The final indicator depends on the depth with which the product is able to work. Cheap models have a small value, it is only 2 or 5 cm. Unlike professional designs, where the depth can reach 10 cm. Changing the value of this parameter is possible thanks to a special mechanism that is placed on the body or stop. The higher the accuracy rate, the more expensive and better the offered model. The best milling cutters are those that have a setting division of 0.1 mm, which has a positive effect on surface finish.

Smooth start

Expensive models are equipped with such a system. The soft start increases the performance of the electric motor. Because it gradually picks up speed, and does not immediately turn on full power. Also, the system has a positive effect on some components of the device. Overload protection is an important parameter that prevents wear of the electric motor and short circuits due to sudden voltage surges.

Parallel stop

Completion plays an important role, especially if there is a rip fence. Thanks to him, the carpenter will conduct a quality sample. In expensive versions, in addition to this element, there is a copying sleeve that will help to copy the outline of the template and use it on the workpiece, which will help increase the speed of work.

Connecting a vacuum cleaner

A useful option that will eliminate most of the debris and not pollute the air in the workshop. However, it is not present in all models, so it is important to check its availability with the seller in advance.

Rating of the best network cutters

Makita RT0700CX2

Despite the low power consumption (710 W), the model is very popular with carpenters and joiners. The rotation speed reaches 10,000-30,000 rpm. The maximum depth of the cutter is 35 mm, which is suitable for small tasks.

To ensure maximum comfort, there is an adjustment of the speed of rotation, as well as maintaining a constant frequency. To prevent the electric motor from failing after a few months of active operation, and also not to overheat, a soft start system is provided. There is a branch pipe for connecting a vacuum cleaner.

It is sold at a price of 11,640 rubles.

Advantages:

Disadvantages:

BOSCH GKF 600 Professional

The router is suitable for use in home workshops. The equipment power reaches 600 W. The rotation speed is 33,000 rpm. The noise level is 84 dB, so the use of headphones is mandatory, otherwise there is a chance of damaging the membranes from frequent use. The product weighs 1.5 kg, which makes it a compact solution. The design is standard, which is suitable for most tasks. The set includes a case for transportation.

The average price is 12,500 rubles.

Advantages:

Disadvantages:

Wortex MM 5013-1 E

Equipment with a power consumption of 710 W is intended for private use. Adjustable rotation speed: from 10,000 to 30,000 rpm, will allow you to correctly set up the tool. There is a branch pipe for connecting a vacuum cleaner. This product is covered by a two-year manufacturer's warranty. Weight - 1.45 kg, which will allow you to easily transport and use the unit. The cutter stroke is 22 mm. Includes two collets, 6 and 8 mm.

Sold at a price of 4 360 rubles.

Advantages:

Disadvantages:

DeWALT D 26200

Professional equipment with a power consumption of 900 W and an adjustable speed: 16000-27000 rpm.The cutter stroke is 55 mm, which is suitable for most tasks and will allow you to create deep holes even in hard wood. The set includes collets, the size of which reaches 8 mm. For more safety, there is a soft start system and overheating protection. To see the work surface in more detail, the manufacturer placed an LED torch on the body, which is automatically activated when turned on. The noise level is 77 dB.

Average price - 16 400 rubles.

Advantages:

Disadvantages:

Hammer FRZ710 PREMIUM

A good option for the middle price segment, which is suitable for the implementation of professional tasks. The consumed power value is 710 W, while the rotation speed is adjustable and amounts to 10,000-30,000 rpm. The set includes three types of collet 6, 8 and 10 mm, which significantly increases the range of work performed. Smooth start and revolving stop will simplify operation several times. There is an accurate setting of the milling depth.

The average price is 7,500 rubles.

Advantages:

Disadvantages:

Top best cordless routers

Metabo KFM 18 LTX 3 RF 5,5Ah x2

Professional unit designed for work in large workshops or production. The rotation speed reaches 7000 rpm, which is normal, but insufficient value, despite the autonomy of work. There is the possibility of a smooth start, as well as an accurate setting of the milling depth. The work comes from a rechargeable battery. The weight of the structure is 3.1 kg, which makes the equipment compact and will help to carry out most of the work without fatigue.

The average price is 75,900 rubles.

Advantages:

Disadvantages:

Makita DRT50ZJX2

A good product that has an adjustable speed: the minimum is 10,000 revolutions, the maximum is 30,000. The collet size is 6 mm, there is also an 8 mm option in the kit. As in the version that is powered by the mains, it is possible to keep the regulation in one value. The connection of a vacuum cleaner and lighting only complement this equipment.

The average price is 15,000 rubles.

Advantages:

Disadvantages:

RYOBI R18TR-0

The beveler in a stylish and ergonomic design will help you perform dozens of different operations. The rotation speed is 29000 rpm, the indicator cannot be adjusted. The cutter stroke is 38 mm, it is possible to accurately set the depth. The work is carried out from a capacious battery. Product weight - 1.3 kg.

Sold at a price of 6 800 rubles.

Advantages:

Disadvantages:

BOSCH GKF 12V-8 Solo

A budget product, where the speed does not exceed 13000. The maximum cutter diameter is 36 mm, which is more than the best option. For more convenient operation there is a spindle fixation. The work is carried out from a 12 V battery, so you should not expect much power from the equipment.

The average price is 10,300 rubles.

Advantages:

Disadvantages:

Finally

The edge router is suitable for furniture restoration, exterior decoration and similar work. Its versatility makes it possible to apply it in various fields of activity. If you have experience using the models described in the rating or you have chosen another router, tell us about it in the comments.