Coconut-filled mattresses are currently the most popular. Products with such filling ensure sleep at a fairly comfortable level, and also take care of your health. The editors of the site "bestx.htgetrid.com/en/" have prepared a rating for you best coconut mattresses for 2020.
Content
Why mattresses with coconut filling are so attractive
Products filled with coconut coir have certain advantages over other products. The properties of coconut fiber allow this product to be used even in the manufacture of mattresses for babies. For example, coira has the following properties:
- natural;
- environmentally friendly;
- hypoallergenic;
- passes air;
- long service life;
- provides correct support for the spine;
- has antibacterial properties.
Methods for making coconut coir
In most cases, coir is used in the form of compressed layers, which have different thicknesses. In order to hold the fibers together, the following methods are used:
- latexing;
- needle punching;
- bicocos.
Latex method
In order to avoid delamination of coconut fiber, it is treated with a layer of latex. This makes it possible to avoid spillage, as well as to increase the elasticity and wear resistance, to make the fiber elastic. Due to their fragility, the fibers can crumble, and the latex layer makes it possible to avoid this moment when using the mattress.
However, you should be careful, because some manufacturers may replace the latex layer with phenol or melamine formaldehyde glue to reduce the cost of the product. This may be evidenced by an unpleasant smell from the product, and also such a product can be harmful to health. For this reason, such mattresses should be purchased only from trusted manufacturers.
Needle punching method
The needle-punching method is one of the cheaper methods for producing compressed fiber. This makes the coconut not as flexible as latex and decreases its durability. Over time, fibers pressed in this way gradually crumble.
Bicokos
By and large, bikokos is an alternative to coir latex. To hold the fibers together, not a latex layer is used, but a synthetic hypoallergenic compound, such as holofiber. This practically does not affect the stiffness of the slab, but the strength increases.
How is coconut coir applied in mattresses
There are several uses for coconut in products, for example:
- coconut latex;
- hard mattresses;
- coconut springs;
- children's model.
The most popular products are considered "coconut-latex", because they combine both rigidity and comfort in balance with each other. Coconut filler is used to give mattresses some firmness, which is ideal for people with back problems. Most often, coconut coir is used in conjunction with a latex layer.
On sale you can find products in which there are no springs, but only the coconut layer alternates with a latex layer.
Rigid product types
A product made entirely from coconut fiber is considered the toughest. Many people compare sleeping on such a mattress to sleeping on planks or wooden flooring. It is recommended to purchase these mattresses only if you have confidence that you can sleep on such a product. Or you have a doctor's recommendation that you need this type of stiffness. Such models can be as thick as a few cm or 20 cm.
Model - coconut spring
These models have special properties that have found their application in Consul mattresses. To obtain such a spring, the web is folded in the form of an accordion in the longitudinal direction. The spring is considered a unique spring because the elasticity in length is higher than elasticity in width. This makes it possible for such mattresses to have anatomicality much higher than that of standard hard mattresses.
Children's types of mattresses
This type of mattress is considered the best choice for babies in the first years of life. These products have the ideal rigidity for newly born babies, and they also have the ability to wick away moisture and also allow air to pass through, allowing the baby to be in the crib with comfort. This product is able to provide an ideal surface to help shape and develop properly the spine, since it does not have physiological curves.
Rating of mattresses with coconut coir
Ascona Trend Lucky
In tenth place is the Ascona mattress, the Trend Lucky model. This choice will be good for those with a predominantly sedentary type of work, as well as for teenagers. This brand has been on the Russian market for a long time and has managed to prove itself from a good side. This model is popular due to its affordability as well as its high orthopedic properties. The Trend Lucky product is suitable for those who have an increased load on the lower back, as well as an incompletely formed skeleton.
Due to the fact that coconut coir is present in the composition, it has the necessary rigidity. When using it, you will not experience any discomfort or discomfort. It also contains polyurethane, which gives increased strength to the product, and also allows to increase the service life of the product.
The average cost for a product is 12 thousand rubles.
Many of the users point out that this is the ideal option for its price range. Some of those who began to sleep on this model had better sleep and no back pain. Also, thanks to the properties of coconut, the sleep microclimate will be at an acceptable level.
Advantages:
- increased spring height;
- long service life;
- environmentally friendly materials;
- high-quality case.
Disadvantage:
- not found.
Ormatek Fresh
The ninth line is occupied by Ormatek Fresh product. This model is considered the toughest by the Ormatek brand. It is suitable for those who are worried about their posture, and also prefer comfort in their sleeping place. However, such a mattress is not suitable for people with a large weight, since the maximum load on it is 115 kg. Therefore, it should be chosen by people of small build and couples who have a slight difference in weight. The model has independent springs that allow you to achieve an even load on it.
The insulation between the springs and the coconut slab is spunbond. It allows you to increase the service life, and also protects against high pressure.
The mattress cover is made of jacquard, a fabric that has increased strength characteristics. This fabric does not allow moisture to be absorbed, and also does not deform. Due to this, the service life is increased and the appearance of the product remains in perfect condition.
The average cost for a model is 11,800 rubles.
Advantages:
- hypoallergenic materials;
- good orthopedic properties;
- cover made of durable jacquard fabric;
- good design.
Disadvantages:
- not found.
Promtex-Orient Soft coconut
The eighth place is occupied by the product Promtex-Orient Soft. The mattress has quite good orthopedic properties, and due to the optimal degree of rigidity, it makes it possible to evenly distribute the load on the spine. A large number of springs per 1 sq. m about 256 pieces. The degree of rigidity is different for each side, which gives the right to choose which one will be more comfortable to sleep on. The height of the mattress varies from 17 to 20 cm.
Perfect for a baby bed and allows you to properly form the child's musculoskeletal system.
Coconut coir is located on both sides and has a thickness of about 2 cm. The mattress has a cover made of knitted fabric. It can be removed and washed in a washing machine with a delicate wash cycle.
The manufacturer recommends changing the position of the head and legs to extend the service life, as well as turning the product over every six months.
The average cost per model reaches 16 thousand.
Advantages:
- can be used in baby beds;
- independent block;
- the cover can be washed;
- several degrees of rigidity;
- durability.
Disadvantages:
- there is an unpleasant smell of glue.
Ormatek KIDS Smart
The seventh line is occupied by a children's mattress from Ormatek. The Russian brand Ormatek has developed a rather tough, but at the same time comfortable mattress for children's beds, which includes coconut coir. The product has a block of independent springs that support the base. The maximum load on the model reaches 100 kg.
This product can be matched to any size bed, even for babies.
The mattress has 8 layers, two of which are fabric with children's prints. This makes the product attractive to children. It has two degrees of hardness, which is typical for products that include a coconut component.
The average cost reaches 9 thousand rubles.
Many users note that over time, the product does not lose its shape and retain its original elasticity and rigidity. This product is almost perfect for a baby bed.
Advantages:
- retains its shape;
- several types of rigidity;
- attractive design;
- large selection of sizes;
- low price.
Disadvantages:
- a little rough edges.
Citrus Tangelo
The sixth line is taken by the Citrus Tangelo product. The model has a fairly attractive price, but because of this it does not lose quality. Because of this, many people prefer to buy this product. The product is quite rigid on both sides, but it does not feel like you are sleeping on the boards.
The model has a spring block at the base to maintain an optimal position.
The maximum load on the product reaches 120 kg. After opening the package, there is an unpleasant smell, which indicates not the most environmentally friendly use of materials, but after three days it disappears. The manufacturer claims that it uses only environmentally friendly materials, including glue, which is approved for use in the food industry, however, the presence of an unpleasant odor indicates the opposite.
The model's cover is made of jacquard, a fairly strong and durable fabric.
The average cost reaches 9 thousand rubles.
Advantages:
- durable fabric;
- moderate hardness;
- the presence of a spring block;
- affordable price.
Disadvantages:
- unpleasant smell after opening the package.
Dimax Only Hard
The fifth line is occupied by a product from the Dimax brand, the Only Hard model. Its characteristic feature is that the model completely lacks a spring block. This is the toughest mattress. It is filled only with blocks of coconut fiber. The number of blocks is 6, and each of them is about 3 cm thick.
It is best to purchase it for those whose weight is less than 160 kg, and for those who are ready to sleep on hard surfaces. Orthopedists recommend this type of product for those who have any problems in the musculoskeletal system.
The product allows you to give the spine the correct position during sleep and removes tension in the bones.
Thanks to the positive properties of coir, you have a comfortable sleeping environment.
This type of mattress is suitable for a summer cottage in which there is no heating, since the material is not subject to decay. The model is wearing a jacquard cover, which is treated with a composition with aloe vera, which increases its antibacterial properties.
The average price reaches 15 thousand rubles.
Advantages:
- hard;
- does not rot;
- has antibacterial properties.
Disadvantages:
- not suitable for all people.
Dreamline Dream 3 DS
The second place is taken by the product Dreamline Dream 3 DS. The product has an independent spring block with 716 springs. Can be attributed to models that have a fairly high degree of rigidity. The height of the model reaches 21 cm. The maximum permissible load on the mattress is 160 kg.
The block has its own peculiarity, in it small springs are staggered among the large ones. This improves the quality of sleep and evenly distributes the load over the entire area of the model.
Above and below the spring block is covered with thermal felt, and on top are plates of coir with a thickness of about 3 cm. Due to this design, the product perfectly permeates air and does not allow moisture to be absorbed from the cover, which is made of knitted fabric.
This product perfectly supports the spinal column while you are resting. Due to its properties, it is suitable for couples who may have a large variation in weight.
Recommended for adolescents in order to properly form the musculoskeletal system.
The cost of the product is equal to 18 thousand rubles.
Advantages:
- spine support;
- high-quality assembly;
- long service life.
Disadvantages:
- not found.
LONAX Cocos S1000
We give the first line in the rating to the Cocos S1000 models from LONAX. The increased rigidity allows this model to be used for people who have a large difference in weight. The maximum allowable limit is 150 kg. The product has excellent orthopedic performance. Thanks to the large spring unit, the spine is supported and the weight is evenly distributed over the entire surface of the product.
The height is 20 cm. The number of springs reaches 1020 pcs per berth.
It is possible to choose the required size for your bed.
The cover on the product is made of high-quality material, which makes it possible to extend the service life. The advantages of this cover include the following:
- easy care;
- dirt is easily removed;
- lasting.
This model has a fairly large weight, so it is worth turning it over only with two people, since for one person it will be unbearable. However, for convenience, the developers have equipped this model with handles.
The cost of the product ranges from 13 to 50 thousand rubles. The average price is 22 thousand rubles. This is a rather expensive option, however, the quality corresponds to the declared price.
Advantages:
- hard;
- long service life;
- hypoallergenic;
- high-quality cover;
- the presence of handles for easy turning.
Disadvantages:
- high price;
- great weight.
What type of product to choose for himself, everyone decides for himself, starting from his financial capabilities, as well as from preferences. Some people need maximum rigidity for a comfortable sleep, while others prefer more comfortable options. Both can find a suitable coconut mattress.