Initially, ultralight did not belong to any of the known fishing techniques. This was the name of the special fishing equipment, the main distinguishing feature of which was the use of ultra-light weight. The ultralight uses a light reel, a spinning rod, and a thin line. It should be noted that the use of such fishing equipment provides many advantages. For example, a medium sized fish is much more difficult to catch with a rig with thick lines.
Over time, ultralight has become an independent fishing technique. This technique is especially relevant in reservoirs where large fish are practically not found. However, it should be noted that the ultralight can also be used to catch large fish. But in this case, catching and withdrawing a large trophy is a little complicated by the fact that ultralight reels do not have a lot of power. Therefore, in order to be able to fish of any size, you need to correctly select the equipment for your rod.
In ultralight gear, reels play one of the most important roles. Such a reel, if correctly and correctly selected, allows you to use a thin line during fishing and use so-called micro-lures. The editors of the site "bestx.htgetrid.com/en/" have prepared for your attention a rating of the best, high-quality, as well as popular models of coils for ultralight and microjig.
Content
How ultralight differs from microjig
Before you start to select microjig and ultralight reels, you need to decide how microjig (MJ) differs from ultralight.Answering this question, it should be noted that both of these lures are great for catching and fishing fish using so-called ultralight lures, weighing from 0.5 to 7 grams. The only difference between these tackles is that micro-jig means fishing with small lures made of silicone, which are additionally equipped with an ultra-light weight.
The definition of ultralight means a general category that implies the use of ultralight lures during fishing. The ultralight category means the use of twitching, classic spinning, and microjig. Simply put, microjig is one of the varieties of ultralight.
The main criteria for choosing ultralight coils
What kind of reel is needed for ultralight fishing, how much does it cost, which models are the most popular When choosing such equipment for ultralight, you should choose a model that is capable of laying the line as smoothly as possible, and also has a high-quality, reliable and ultra-responsive friction brake.
In addition, such equipment, like all other fishing equipment, must be well balanced. Therefore, in this case, it is recommended to pay close attention to the indicators of its weight, as well as size. After all, it is these characteristics that determine the possibility of using ultralight lures when fishing.
In addition, when choosing equipment for ultralight, you need to take into account its design features, materials used during its production, the number of bearings (the smoothness of the ride depends on this), reliability, quality of the line-laying roller, and a friction brake. It should be noted that a correctly selected rig does not make the tackle used heavier, does not cause an imbalance in its balance and does not worsen the sensitivity level of the spinning tackle.
Important! To cast lightweight spinning lures, you must use a line or line of the smallest possible diameter.
It should be noted that not all models and series of reels are capable of fully working with small diameter fishing lines or thin cords. The use of thin fishing line and improperly selected equipment is fraught with the constant appearance of a beard and dumping of loops. In addition, when fishing and playing fish with an ultralight, the friction brake capabilities are of great importance.
Weight
It is recommended to buy reels complete with a spinning rod. At the same time, in order for the equipment to be as balanced and sensitive as possible, it is recommended to purchase light models of small sizes. During the purchase, it is recommended to pay attention to the spinning test indicators:
- When testing up to 3.5 grams, it is recommended to purchase coils whose weight varies within 160 grams;
- When testing up to 5 grams, it is best to select a mechanism whose weight does not exceed 190 grams;
- When testing a rod up to 7 grams, it is preferable to buy a mechanism whose weight does not exceed 210 grams.
Spool
What are the criteria for choosing a spool, which one is best to buy? It is recommended to select reels with a spool size ranging from 1000 to 2000. If you plan to fish large fish, then an acceptable spool size will be 2500. It should be noted that it is preferable to purchase graphite spools. This is due to the fact that they have low weight and good strength indicators.
When choosing a spool, in the manufacture of which metal was used, it must be remembered that such a material significantly adds mass to the entire mechanism. However, the main advantage of metal spools is their durability. Expensive models are equipped with a set of spools of several sizes, which, moreover, can be made of different materials.
On a note! The spool must be absolutely free of any defects and mechanical damage. Otherwise, she will strongly wipe the line, which is fraught with frequent breaks.
Friction brake
The friction mechanism is responsible for eliminating a strong jerk load during fishing, so that the probability of equipment breakage is minimized. When choosing a clutch, it is necessary to pay attention to the indicators of the braking amplification of the mechanism and its sticking. The braking gain is primarily dependent on the test used when fishing the rod. Also, this parameter is influenced by breaking the load of the line used.
As a rule, in the ultralight equipment is used corresponding to the parameters from 2 to 4 kg. Determining which friction brake you need is quite simple. For example, if we take a value of 3 kg, then it should be noted that the clutch will hold back the spool, the mass of which does not exceed this parameter. When the mass becomes larger, it will begin to turn, so that critical loads do not affect the tackle.
On a note! Most of the expensive models are equipped with devices that have not only fast, but also quite smooth response. When choosing equipment for ultralight, it is recommended to purchase mechanisms that are equipped not with a rear, but with a front friction brake.
Which coil should be used for microjig
During microjig fishing, light and sensitive rods are used. Therefore, in order not to disturb the balance of such equipment, it is necessary to use the appropriate coil. It should be noted right away that you don't need to buy the lightest and most compact models for microjig.In this case, the balance of all the tackle used during fishing acts as the main reference point.
Simply put, when choosing equipment for microjig, first of all, you need to take into account the length indicators, as well as the weight of the rod used. After installing the reel, the center of gravity of the rod should be at the place where it was attached. For micro-jig, it is recommended to purchase devices with a front friction brake, the size of which varies between 1000-2500. It is best to buy models that are equipped with a large diameter spool. The average weight of microjig coils varies between 200-280 grams.
On a note! It is recommended that you purchase devices with a housing made of aluminum rather than plastic. This is due to the fact that during heavy loads, the plastic case begins to deform strongly, which causes an additional load on the gears of the mechanism.
The best coils for ultralight and microjig
In microjig and ultralight, coils play an important, paramount role. Together with high-quality rods, correctly selected equipment makes it possible to use thin line and light lures during fishing. Thanks to the use of a small diameter fishing line, you can make long casts and significantly increase the sensitivity level of the rod.
Which company is the best tackle On the market there are many different models of reels for both ultralight and microjig. However, the most popular among domestic consumers who prefer to use ultra-light spinning rods during fishing are products manufactured by Shimano and Daiwa.
DAIWA Ninja LT 1000
Designed using the LT principle. Thanks to this, its dimensions, as well as weight, were reduced, but this did not in any way affect the strength indicators of this rig. The mass of this spinning reel is 210 grams. Composite material was used in the manufacture of the case. It is also equipped with an aluminum perforated spool and a hollow rotor.
The main feature of the DAIWA Ninja LT 1000 is its uniform and smooth running, which is ensured by 4 bearings. The rotor has a special design that minimizes the possibility of parasitic vibrations. Also, it should be noted that the DAIWA Ninja LT 1000 is equipped with a Tough Digigear milled gear. Thanks to the precise fit of the parts, the mechanism has a smooth operation and high reliability rates.
The braking system is located at the front. Its characteristic feature is a reduced starting resistance, as well as increased power indicators. Thanks to this, this model maintains the integrity of the thin lines during sharp bites. The clutch is able to withstand forces up to 5 kg inclusive. The gear ratio is 5.2: 1.
Thanks to the well-thought-out spool geometry, the DAIWA Ninja LT 1000 allows for long casts. The line capacity indicator is 150 meters (when using a line with a diameter of 0.14 mm). With one turn of the handle, 64 cm is unwound. This model is also equipped with a line guide roller, which significantly reduces the risk of twisting the cord.
Advantages:
- Price (average cost: 3008 rubles);
- Dimensions;
- Quality;
- Durable body;
- Convenient to use;
- The clutch is capable of withstanding a load of up to 5 kg.
Disadvantages:
- There is no spare spool included;
- Not suitable for heavy loads.
DAIWA Ballistic LT 2500D
Refers to a series specially designed for spinning rods, which are produced using the latest LT technology (lightweight and durable). It is lightweight (only 180 grams), however, this does not in any way affect its performance and reliability. In addition, this rig has a small body and powerful drive, making it ideal for fishing with ultra-thin lines and light lures.
The body of this model is made of durable material, thanks to which the internal mechanisms are reliably protected from external influences. Thanks to the well-thought-out brake system, the clutch operates smoothly and evenly. The main spool is made of aluminum. The capacity is 150 / 0.28. The size is 2500 and the gear ratio is 6.2. This model is inertia-free, equipped with 6 bearings, as well as a front clutch.
Advantages:
- High reliability;
- Quality;
- High rates of possible load on the clutch (up to 10 kg);
- Availability of 6 ball bearings;
- Reliable braking system;
- Silent rotation;
- Good accuracy.
Disadvantages:
- High cost (the average price varies within 20,776 rubles);
- A spare spool is not included.
AQUA Pegos 1000 (1bb)
A budget, inexpensive spinning model equipped with a front friction brake. Its size is 1000 and its weight is 208 grams. The gear ratio is 5.5: 1. The spool is made of graphite and has a capacity of 0.18 / 235; 0.25 / 120. Due to the uniform movement of the rod, an even winding of the line is ensured.
The handle, which is made of plastic, can be installed under any hand (right, left) if desired. The capacity of this model is 0.25x120 mm / m. Country of origin China. Perfect for use with ultra-light baits and thin lines. Provides a good level of rod sensitivity when fishing.
Advantages:
- Assembly;
- Cost (average price is 490 rubles);
- Good level of balancing;
- Small, optimal weight;
- The ability to install a handle for any hand;
- Possesses high strength indicators.
Disadvantages:
- The handle is made of plastic, which is why it can fail under heavy loads;
- Equipped with only one bearing;
- Poorly withstands heavy loads.
SHIMANO 16 NASCI 500 FB
High-quality inertialess model from one of the world's most popular manufacturers. Equipped with a front friction brake, 4 ball bearings and a roller bearing. The spool is made of aluminum. The size of this model is 500 and its gear ratio is 5.6: 1. The SHIMANO 16 NASCI 500 FB case has an interesting, non-standard design and color scheme. It has a smooth, light ride and a durable, reliable mechanism. Unlike previous models, the SHIMANO 16 NASCI 500 FB is equipped with a new type of rotor as well as a lightweight spool with a hollow forged main pair.
It is worth noting that SHIMANO 16 NASCI 500 FB is perfectly protected from dust, dirt, as well as water or sand getting inside its mechanism. Thanks to this, the period of operation of its mechanisms is significantly increased. The case is made of composite XT materials and has an enlarged back cover that protects it from external influences. The SHIMANO 16 NASCI 500 FB model has a high quality styling that allows you to use the thinnest and softest laces when fishing.
Advantages:
- Acceptable cost (7490 rubles);
- Build quality and materials;
- Styling quality;
- Light weight (175 grams);
- A large number of bearings (4 + 1).
Disadvantages:
- Small indicators of capacity (0.20 / 110);
- Small indicators of the maximum possible tractive effort on the friction clutch (no more than 2.5 kg);
- Additional bobbin is not included.
Dragon Aggressor 1015FD
The Dragon Aggressor 1015FD series was created specifically for complex work with spinning rods. In the manufacture of the case, a composite material was used, due to which the level of strength was retained while significantly reducing its weight.
Brass was used in the manufacture of the main gear. The bearings are made of stainless steel. Due to the perfectly balanced installed rotor, the possibility of extraneous vibrations during fishing is eliminated.
Equipped with a simple and time-tested and many experienced anglers, the so-called planetary gear. The Dragon Aggressor 1015FD weighs just 211 grams and has a gear ratio of 5.2: 1. Equipped with a large number of bearings (9 + 1).The diameter of the front side of the spool is 41 mm. The handle is secured with a special clamping screw. The volume is 0.20mm / 210m. Belongs to the ultraight class.
Advantages:
- Reasonable price (average cost is 3795 rubles);
- The presence of a large number of bearings;
- Well balanced;
- Functional;
- Convenient to use;
- The body is made of high quality composite material;
- Low weight.
Disadvantages:
- No spare spool included;
- Fakes are often found on the market under this brand.
RYOBI Tresor 1000
A budget model from the popular, one of the best Japanese manufacturers RYOBI, which is perfect for microjig. The most optimal option in terms of price / quality ratio. The RYOBI Tresor 1000 is a spinning model designed for the left hand. Equipped with a front friction brake and 4 ball bearings, as well as a roller bearing. The body is made of aluminum. The gear ratio is 5.1: 1. The size of the RYOBI Tresor 1000 is 1000 and its weight is 275g. The handle is removable and foldable. The forestry capacity is 0.235 mm / 115 m.
Advantages:
- Acceptable cost (price 1756 rubles);
- Good build quality
- Easy rotation;
- Design;
- The minimum amount of backlash during operation;
- A large number of bearings;
- Good rotation speed;
- Ergonomic handle;
- High-quality line laying roller, which ensures perfect winding;
- The presence of an effective braking mechanism.
Disadvantages:
- There is no spare spool included;
- After purchase, you need to check the bolt of the forestry device, it is recommended to tighten it if necessary;
- A bit heavy for micro-jig (275 grams).
Comparative characteristics of coils for ultralight and microjig from different manufacturers
| Name, description | Weight (in grams) | The size | Transfer number of revolutions | Cost (in rubles) |
|---|---|---|---|---|
| DAIWA Ninja LT 1000 | 210 | 1000 | 5.2:1 | 3008 |
| DAIWA Ballistic LT 2500D | 180 | 2500 | 6.2:1 | 20776 |
| AQUA Pegos 1000 (1bb) | 208 | 1000 | 5.5:1 | 490 |
| SHIMANO 16 NASCI 500 FB | 175 | 500 | 5.6:1 | 7490 |
| Dragon Aggressor 1015FD | 211 | Not indicated | 5.2:1 | 3795 |
| RYOBI Tresor 1000 | 275 | 1000 | 5.1:1 | 1756 |
When choosing a coil for ultralight and microjig, you should always pay attention to both its strengths and weaknesses. A positive feature and feature of such a rig is to ensure a smooth and soft ride, the ability to work with thin fishing line and ultralight lures. In addition, during its production, as a rule, light alloys are used, which provide high strength values and low weight.
The disadvantages of such equipment for ultralight and microjig include the narrow scope of their use, as well as the lower reliability of the mechanism (compared to ordinary models). If you use a coil for ultralight or microjig presented in our rating or use another model for these purposes, please share your opinion with us in the comments.
