🎣Best spinning reels in 2020

Successful fishing with a spinning rod largely depends on the reel. The fishing line is stored in it, without it you cannot make a good cast, do not complete the posting, fishing for fish largely depends on its qualities. On store shelves, you can find three types of these devices of different quality, for different spinning rods and from a dozen manufacturers. It will be difficult for beginners mastering this type of fishing to find a suitable product. The editorial staff of the site "bestx.htgetrid.com/en/" offers an overview of the best spinning reels for 2020.

What is spinning

The English word "spinning" in translation means "to spin". This is the name of the tackle with the help of which amateurs and athletes are engaged in catching predatory fish. This method consists in casting the bait into the water and its further posting so that with its movements it resembles a small fish, provoking river predators to attack: pikes, perches, zander, etc.

Most often, a metal spoon or a wobbler is used as a bait. The latter can be both metallic and silicone. Both types of bait differ in size, weight and "behavior" on the water. They have in common a similarity with small fish - the basis of food for the listed predators.

What are the spinning rods

The spinning rod includes:

• a rod in the form of a thin long cone;
• pass rings;
• coil;
• fishing line.

Actually, a rod is called a blank, a whip or a stick.

Interesting! "Blank", translated from English, means "empty", in the sense of a bare stick without rings, line and drum. Such an unequipped rod can be compared to an ordinary stick. The process of casting the bait resembles the movement of a whip. Hence the three names for spinning rods: blank, stick and whip.

Spinning rods are:

1. Plug - one-piece (non-collapsible) rods designed for fishing with heavy lures for a large predator (catfish). The line rings are removable. They are selected independently, depending on the type of fishing, the section of the line, the design and size of the drum.
2. Telescopic - consisting of hollow pipes entering one another, with non-removable rings. More suitable for beginners.
   Telescopic "sticks" are inferior to plug-quality workmanship, sensitivity to bite, ergonomics, unstable balance during active fishing. Their only advantage is ease of transportation. Experienced fishermen prefer to use plug whips.

Material

The material for spinning is usually fiberglass, carbon fiber (carbon) and composite (fiberglass with carbon). Each of them has its own advantages:

1. Fiberglass.The most affordable option with sufficient strength, lightness and low quality. Suitable for beginners.
2. Carbon-fiber forms are classified as "the best". The strongest, lightest, most sensitive, high quality and expensive.
3. Composite. Something in between the second and third options. Strong, high quality and sensitive, inferior in lightness to carbon fiber and superior in cost to fiberglass.

Test

On the surface of the stick there is a C.W or test mark and numerical values ​​for the weights of the bait (minimum and maximum) recommended for each blank. Measured in grams. It is designated by two numbers separated by a hyphen.

Spinning structure concept

The system is the ability of the blank to bend during posting and especially when playing fish. There are four types of tuning:

• superfast - when the very end of the whip bends;
• fast - the upper third of the whip is bent;
• parabolic or medium system - bend from the middle;
• slow - bending of the whole body.

The shape of the blank is an indicator of its rigidity, sensitivity and range.

Important! Superfast blanks are most sensitive. The whips of a slow system are inferior to all others in sensitivity, but their baits fly farther than others.

What are the coils

Before proceeding with the selection of any product, you should carefully study it. Professionals and experienced fishermen do not need detailed descriptions. It will be useful for beginners.

There are three types of coils:

Inertial

This is an outdated design, but it still has admirers. Among the advantages of this type are:

• a drum of impressive volume, suitable for storing very long line;
• simplicity of design;
• the ability to more sharply feel the moment of swallowing the bait and hook the fish in time;
• affordable cost.

The same design simplicity is the reason for the following disadvantages:

• the drum rotates after the end of the cast, as a result of which the line continues to come off it;
• entanglement of the line with the formation of a "beard".

Inertialess

A more functional and convenient option, suitable for any fishing method with different blanks. It has a lot of undeniable advantages that are absent in inertial drums:

• the descent of the fishing line stops immediately after the bait splash down, its entanglement and the formation of a "beard" is practically excluded;
• you can fish with thick and thin fishing line, flexible and rigid "stick", large and small bait;
• long throw;
• reeling the line at high speed;
• adjustable clutch;
• installation of the retraction handle for the right and left hand.

Disadvantages:

• complicated mechanism that requires regular cleaning and lubrication.

Multiplier

The most powerful devices. Most often used when trolling, especially at sea, for large predatory fish.

In fact, this is a further development of the inertialess model. Among the advantages are:

• the ability to play fish weighing 50 kg or more;
• the use of heavy baits;
• the possibility of long casts, regardless of the section of the line;
• endurance and long term manufacturer's warranty.

Among the shortcomings are noted:

• significant mass;
• exactingness to careful care, precise settings;
• long time to gain experience in fishing with the "cartoon";
• cost is not for everyone.

Coil Specifications

In order to choose a reel for spinning, it is not enough to know what type it belongs to. Inertialess and multiplier devices are quite complex mechanisms. To make the right choice, you need to know what this or that device is capable of, i.e. study its technical characteristics. The most important of them are marked on the housing in the form of corresponding markings.

Number of bearings

Since we are talking about a rotating mechanism, bearings are indispensable here. However, for the fisherman, this information can only be of secondary importance, since the quality of the device is determined not by the quantity, but by the quality of the bearings.But if this information is interesting to the owner, he should look for the inscription: "ball bearing" and the following numerical value.

Gear ratio value

The inscription "gear ratio 3.0: 1" is applied on the bodies of the products. This means that in one turn of the handle, the drum will turn three times. In fact, this characteristic tells the buyer what kind of wiring the mechanism is intended for. Distinguish between high-speed and traction wiring. In the first case, the mechanism is able to provide a high speed of retrieval, in the second - a powerful tractive effort will allow you to play with a heavy bait or withdraw a weighty trophy.

Important! With an increase in the gear ratio, the drive speed increases and the thrust decreases.

In other words, a high-speed reel is chosen for small fish, and a traction reel for large fish.

Spool size or capacity

It is marked with a number divisible by 1000. Shows how many line and what section can fit on the drum. It is determined by the product of the length of the cord and its cross section. Marking 5000 means that 100 m of 0.5 mm line, or 200 m of 0.25 mm, etc. can be wound on this drum.

For ultralight blanks they choose a product of size 2500, medium ones are completed with drums from 2500 to 3560, heavy ones - 4000 and more.

What is a clutch for?

A friction brake is a part of the inertia-free drum mechanism responsible for ensuring that the fish does not break the line when playing. For example, a fish weighing about 4 kg swallowed the bait on a 0.15 mm mono line. Resisting, such a trophy could stretch and break the line, if not for the friction clutch. It can be adjusted to any load, exceeding which the line is blown off the drum. The fish continues to fight, losing strength. The fisherman, on the other hand, needs to be patient and from time to time, while the fish is resting, reel in the fishing line, pulling the catch closer.

The clutch can be front or rear, depending on its location relative to the drum. The front one is more often used with a spinning rod, the rear one with a feeder. Both are endowed with their own advantages and disadvantages.

The advantages of the front clutch include:

• high sensitivity to the weakest resistance.

The disadvantages are:

• inconvenient location of the screw (makes it difficult to adjust the friction clutch during fishing);
• it is difficult to replace the spool, because first you have to dismantle the clutch, and then reassemble it.

The rear drag is more comfortable to adjust, but less sensitive to fish resistance. Used with heavy-duty blanks and line, feeder fishing for large fish and trolling.

Forestry mechanism

There are two types of it:

• with an endless screw;
• connecting rod.

With high-quality manufacturing and assembly of the mechanism, it makes no sense to understand the intricacies of its work. The quality of the winding will always be sufficient. Much more important is how the line is wound. Simple straight-line winding allows more line to fit on the drum, but the possibility of tangling increases. With cross-winding, it is much more difficult to entangle the line, but it also fits much less.

Interesting! The spinning reels are nicknamed the "meat grinder", not otherwise for the worm-type forestry and the handle characteristic of the kitchen machine.

Manufacturing material

The main elements and parts must be strong and durable. At the same time, the total weight of the device should be light enough so as not to turn fishing into torture. This largely depends on the quality of the materials used. The best cases are made of titanium, spools are made of aluminum alloys, and gears are made of bronze. Everything else is made of stainless steel and high-quality polymers.

Choosing a baitcasting reel

This type of fishing tackle belongs to the elite group of products. They combine the advantages of "meat grinders" and inertial drums, and at a cost they are much more expensive. Their gear ratio most often ranges from 4.5: 1 to 6.5: 1. In fact, this is a mini winch capable of pulling out a weighty bait and playing out large fish. The advantages of "cartoons" are:

• with small dimensions and weight, "cartoon" will cope with casting heavy baits better than a similar "meat grinder";
• direct transmission will allow the fisherman to “wear down” a large, actively resisting fish;
• the line will not twist;
• when casting, the bait flies twice as far as with other devices;
• the sensitivity of the tackle increases due to the positioning on top of the blank.

There are also disadvantages and there are many of them:

• spinning with such tackle is heavier than usual;
• complex settings;
• it takes longer for beginners to master;
• costs more.

Coil selection criteria

If there is already a spinning rod, the product is selected for it. Everything in the collection should become a single balanced system, very effective in any way of fishing. A beginner needs to decide on the following points:

• for what method of fishing the spinning rod was purchased;
• what baits will be used;
• what will be the fishing conditions.

The further direction of the search for a suitable option depends on this.

Choice of spinning reels

1. The dimensions and total weight of the spinning rod depend on the size of the product. For light baits and medium-sized fish, drums of 1000 - 2500 are enough. If you are interested in large trophies, choose sizes from 3000 to 5000. Larger sizes are used for very large specimens when fishing at sea.
2. A heavy mechanism can strain your hand while fishing. It is better to choose a lightweight and durable product made of aluminum alloys or titanium.
3. When buying, the lightness and smoothness of the drum run, the absence of backlash is checked. It is not worth choosing by the number of bearings. The principle "the more the better" does not work in this case.
4. Having decided on the method of fishing and the size of future trophies, pay attention to the gear ratio. It depends on this, whether you will fish out large specimens with a high-speed reel, or drag small perches with a "winch".

Selection of the baitcasting reel

Multipliers for spinning (not power) fishing are divided into two classes.

Low profile

For the streamlined body shape, they received the nickname "soap dishes". They differ in a small angle of bending of the fishing line, due to which its friction against the rings is minimal. As a result, "soap dishes" provide the longest casts. Equipped with a magnetic brake. They work with lures from 1 to 28 grams and line from 0.22 to 0.32 mm. The weight of the product itself does not exceed 195 g, but its power is much higher than the much larger and heavier "meat grinders".

"Barrel"

Received the nickname for the barrel shape. With a mass of up to 300 g, it is capable of pulling large trophies on a rapid. Similar inertialess mechanisms weigh more than 500 g. "Kegs" are designed to work with baits up to 60 g.

How much is a good spinning reel

Not technical, but an important selection criterion. Beginners begin to gain experience with small spinning devices for light lures and small fish, with an average cost of around 2,000 rubles, for example, the Daiwa Sweepfire.
In the range from 2,000 to 3,000 rubles, almost every manufacturer offers good devices. An example is the Ryobi Tresor, which is equipped with a reverse brake, the quick response of which makes this device indispensable for jerky driving.

From 4000 to 6000, you can find a reliable universal option from the best manufacturers. When choosing especially durable products for a major trophy, start your search in the range of 7,000 rubles and above.

What else to pay attention to

When purchasing a coil in a store, check it for the following negative points:

• there should be no backlash in the handle;
• do not take a product with a lateral spool play;
• check the smoothness and uniform winding of the line;
• the forestry device must not snap into place spontaneously;
• fast rotation of the drum should not be accompanied by vibration;
• be sure to check the clutch engagement.

It would be better to take the form with you to the store and assemble it with a coil. The center of gravity should be in the area of ​​the hand, then it will not experience overstrain when fishing.

Top manufacturers

1. Daiwa. The popularity of the products of the Japanese company is explained by the constant introduction of innovative solutions and high-quality materials. Daiwa's budget and expensive samples are of high quality.
2. Shimano. World renowned bicycle company.He has been engaged in fishing tackle since 1971. The popular Shimano models are excellent value for money.
3. Ryobi. Since the mid-70s of the last century, this Japanese company has been on the list of leaders among manufacturers of fishing tackle. The company's strategy is the use of modern technologies and materials without increasing the cost of products.
4. Aby Garcia. The most popular Swedish company is a manufacturer of high quality tackle. Especially popular are the "cartoons" from the Ambassadeur line.
5. Banax. A well-known South Korean manufacturer of fishing tackle. Its strategy is high quality, wide assortment, affordable cost.
6. DAM. German company. He has been engaged in fishing tackle since 1947. Products of excellent quality enjoy well-deserved popularity all over the world.
7. Balzer. Another German company. On the market since 1949. Today, its products are manufactured in factories in Eastern and Western Europe and are in high demand.
8. FOX International, UK, one of the largest privately owned fishing tackle companies in Europe.
9. Mitchell. Franco-American Company - manufacturer of fishing tackle and accessories. Sales to all continents. The number of sold devices of this brand is estimated at many tens of millions of copies.

The list of the best manufacturers goes on and on. For beginner spinning players, this is enough. It is difficult to say unequivocally which company the product is better to buy. For a start, you should choose inexpensive samples from English, German or Asian manufacturers.

Chinese coils

Shop counters are littered with cheap Chinese handicrafts of non-existent brands, and sometimes fakes of well-known manufacturers. Prices for them range from 200 to 500 rubles. It seems to beginners that such a mechanism is enough for a start. However, after a few days of active operation, the "brand" ends up in a trash can. The disadvantages of such crafts cannot be counted: backlash, crackling and extraneous noise when rotating the drum, rapid wear of gears, disgusting bearings, cheap plastic, etc. There is only one merit - a bargain price.

Where can I buy

It is best of all in specialized stores, where the product can be looked after, touched, checked how the coil works and whether there are any defects. As a rule, the sellers of fishing tackle shops are professionals in their field, able to give useful advice and recommendations. If the drum you are looking for is not on the counter, you can make an online order in the online store.

Rating of quality spinning reels

10 Daiwa Sweepfire E 4000C

Inexpensive "meat grinder" for a beginner, with a smooth front clutch. The drive gears are driven by Degegear II technology. Sweepfire is as smooth as more expensive models. Due to the presence of a roller in the line stacker, the possibility of twisting the braided line and line is minimized. The absence of a reverse switch simplifies the mechanism and makes it more reliable. Suitable for 15-40g dough forms.

Advantages:

Disadvantages:

Model name / brand name	Specifications	average price
Daiwa Sweepfire E 4000 C / Japan	Inertialess, with a composite body, front clutch, gear ratio 5.3: 1, size 4000. Bearings: roller-1, ball-1. Weight 380g.	1260 rubles

9 Ryobi Ecusima 3000Vi

Spinning model with front drag allowing fine adjustment of line retention. Smooth operation is ensured by 5 bearings and a balanced V-rotor. Body and rotor material - high-impact graphite. So that when casting the line freely leaves the drum and does not form loops, the front board has a special shape and is coated with titanium nitride. The same processing of the bow and roller of the line guide protects these parts from premature wear. According to buyers, the product has an excellent value for money.

Advantages:

Disadvantages:

Model name / brand name	Specifications	average price
Ryobi Ecusima 3000 / Japan	Inertialess for the left hand, with a front drag, gear ratio 5.0: 1, size 3000, graphite body, aluminum spool, folding removable handle. Bearings: ball-4, roller-1. Weight 302g.	1855 rubles.

8 Balzer Tactics Hype 3250 RD

An excellent purchase for little money. The value for money is unique in this case. The product is made using the most advanced technologies and equipped with the highest quality. The presence of an endless reverse lock, the lifting S-mechanism of the forest paver, precision + needle bearings, an aluminum spool complete with a spare, high freewheel sensitivity - such a set is rarely found in inexpensive products.

Advantages:

Disadvantages:

Model name / brand name	Specifications	average price
Balzer Tactics Hype / Germany	Inertialess with front drag, aluminum spool, gear ratio 5.2: 1. Bearings: ball-2, roller-1. The model is completed with a nylon / ABS plastic spool. Weight 245 g.	1762 rubles

7 Banax Hollis 2500

An inexpensive product made using modern technical solutions and materials. Thanks to the well-thought-out design of the line stacker, self-ejection of the bow is excluded, and line twisting is minimized. The use of a lightweight aluminum spool, a durable graphite body, a balanced rotor coupled with an affordable price will delight not only beginners, but also experienced spinners.

Advantages:

Disadvantages:

Model name / brand name	Specifications	average price
Banax Hollis 2500 / South Korea	Inertialess for left hand, with front drag, gear ratio 5.1: 1, size 2500, with aluminum spool. Weight 260 g.	2437 rubles

6 Shimano Catana FC 3000 S

For more than five years, the Catana FC 3000 S has been in high demand among spinning reels for its reliability, smooth operation and excellent value for money. Sealed stainless steel bearings, Varispeed line rewinding system and AR-C aluminum spool make this model an all-season fishing tool in all conditions.

Advantages:

Disadvantages:

Model name / brand name	Specifications	average price
Shimano Catana FC 3000S / Japan	Inertialess model with a front clutch, gear ratio 5.2: 1, size 3000. Bearings: roller-1, ball-3 pcs. Aluminum spool, spare included. Weight 265 g.	4000 rubles.

5 DAM Quick Dragger535XLFD

A versatile product with very decent equipment, traditionally high quality materials and workmanship, at an affordable price. With a robust graphite body and rotor, low profile aluminum spool, patented S-winding system and computer-balanced rotor, the DAM Quick Dragger535XLFD is suitable for feeder and spinning fishing. Even light lures from this reel fly much further than from other similar devices.

Advantages:

Disadvantages:

Model name / brand name	Specifications	average price
DAM Quick Dragger 535XLFD / Germany	Inertialess model with graphite casing and rotor, anodized aluminum spool, front drag, gear ratio 5.1: 1, with five steel bearings. The spool holds 120m of 0.2mm line. Weight 285 g.	6200 rubles

4 Abu Garcia Ambassadeur Pro Max 3LH

The first multiplier model in our review. In terms of mass and appearance, it is a category of "soap boxes". An excellent option for those who are quite adept at fishing with spinning gears and have a desire to try something new. The clutch and magnetic brakes of this "soap dish" are not satisfactory.Durable graphite housing, as many as 7 bearings, ensure durability and smooth running. Complete with a medium action blank, we get a very long-range and light tackle.

Advantages:

Disadvantages:

Model name / brand name	Specifications	average price
Abu Garcia Ambassadeur PRO Max 3LH / Sweden	Multiplier version for left hand, 7.1: 1 gear ratio, backstop. The body is graphite, the spool is aluminum. Bearings: roller + 7 ball bearings. Weight 207g.	6390 rubles

3 FOX EOC 10000

An interesting spinning model with a baitrunner - a device that allows you to leave the rod unattended for a while, without fear of losing it with a powerful bite. It is enough to cock the baitrunner, and the line will begin to come off the drum when biting, and the rod will remain in place. Turning back to the tackle, the angler turns off the function by turning the handle, then the control of the fishing is carried out by the friction clutch. FOX EOC 10000 performs well in small bodies of water with a casting range of 90 m.

Advantages:

Disadvantages:

Model name / brand name	Specifications	average price
Fox EOS 10000 / England	Inertialess with a baytrunner, front and rear clutches, gear ratio 5.5: 1, size 10000. Weight 558g.	5583 rubles

2 Mitchell Mag-Pro Lite 1000

Joint Franco-American "meat grinder". The model was created taking into account the most stringent requirements, modern trends and trends in fishing "fashion". The use of magnesium to create a lightweight and durable body and rotor, needle anti-reverse, heavy-duty bearings, dust and dirt resistant and salt water resistant, two aluminum spools included, makes this mechanism reliable and durable.

Advantages:

Disadvantages:

Model name / brand name	Specifications	average price
Mitchell Mag-Pro Lite 1000 / France / USA	Bezinertsionka for the left hand, with a front clutch, gear ratio 6.2: 1, size 1000. Magnesium alloy body, aluminum spool. Bearings: roller-1, ball-9. Weight 234g. Supplied with add. Spools.	10300 rubles

1 Shimano Stardic C3000

The Shimano Stardic C3000 gets the best reviews. Creating their inertialess models, the development team adheres to the principle: products must be tough, strong and durable. This was fully implemented in the Stardic C3000. The AR-S spool design has been patented by the company for a long time. The V-lip makes it easier for the line to come off in small rings, the lures fly further and more accurately. Shimano engineers have developed and classified a special coating on the spool to protect it from line abrasion. The drum is large enough. In general, it is a universal tackle for a spinning player of any level. With her you can go for pike and other predators.

Advantages:

Disadvantages:

Model name / brand name	Specifications	average price
Shimano Stardic C3000 / Japan	Inertialess, with drum size 3000, front drag, gear ratio 5: 1. Aluminum body. Bearings: roller 1, ball -6. Weight 230g.	13590 rubles

Spinning fishing is a very active way of outdoor recreation. Correctly selected tackle guarantees a lot of unforgettable sensations of fishing luck.

The editors of the site hope that our review will help novice spinners understand how to choose the right tackle, which reel is better to buy, spinning or multiplier, and not make mistakes when choosing.