Jacuzzi has always been a testament to prosperity and luxury, but in our time, this plumbing has also become the best option for various procedures of a water-improving nature. They can be done without leaving home. Hydromassage is an excellent prophylaxis and remedy for many diseases. The dynamic effect of the water element will be useful in case of physical inactivity, nervous overexcitation, obesity and other diseases.
The horizontal position of the human body makes it possible to relax while taking a bath. The procedure can be combined with watching a video or listening to your favorite tracks. It is not at all easy to choose this plumbing for your own home, so the editorial staff of the site "bestx.htgetrid.com/en/" has prepared for you a rating of the best whirlpool baths for 2020.
Content
The subtleties of choosing a hydromassage bath
Usually, when buying a jacuzzi, it is important to pay attention to the following criteria:
- Manufacturing material;
- Technical specifications;
- Design;
- Manufacturer:
- Difficulty in plumbing maintenance.
Everyone chooses the functionality of hydromassage plumbing according to their own needs. For some, comfort during water procedures is important, others are more interested in the power of the jet, and still others pay increased attention to the aesthetic component of the product.
Modern corner jacuzzis are not suitable for typical bathrooms. In this case, it is better to give preference to rectangular shapes. Standard doorways are not very suitable for indoor jacuzzi. In this case, the expensive purchase will have to be taken apart.
A whirlpool device is not only a bathtub, but also an electronic device, so the wiring in the bathroom often needs to be changed. To ensure safety, you need to take care of grounding. High-quality waterproofing of the entire room will help to avoid possible leaks.
Manufacturing material
Each whirlpool bath provides a therapeutic effect through the action of water flows on certain parts of the body, therefore, the material of manufacture does not play a fundamental role in this aspect. This indicator only affects the durability of the product. Plastic models will not be considered, as their performance and durability are questionable.
Cast iron
The traditional solution is a cast-iron bathtub with hydromassage. It will last quite a long time. The noise level of water in such plumbing is much lower. Caring for her is not particularly difficult. The durability of a cast iron product has been tested by time. The cost of a cast-iron whirlpool bath is low, so it is often referred to as a budget jacuzzi. The best models were recognized by the products of Spanish and French manufacturers, but the price for a jacuzzi here will be higher than the average price segment.
The main disadvantage of cast iron Jacuzzis is their transportation and installation. The large weight of the product in this case plays an important role. Not all floors are able to cope with this load, so the installation of this type of cast iron plumbing in modern high-rise apartments can become problematic.
Steel
Although the bath itself will come out relatively inexpensively, you will have to spend a lot on the hydromassage system. The main part of the cost is the pumping equipment, the air supply system and the anti-slip coating. Unlike cast iron products, this product is much lighter. In terms of heat capacity of the material, steel plumbing loses, and the noise level is minimized here due to the use of innovative technologies.
Acrylic
Many manufacturers produce a jacuzzi made of acrylic. This fixture is usually warranted for 10 years, but flexible items and nickel-plated parts are not covered. Acrylic is demanding to care for, so many consumers complain about the fragility and frequent deformation of the material. It is sensitive to mechanical and chemical damage. When a person with a large weight is taking water procedures, the coating can bend under the weight of the weight. The acrylic product is easy to transport and install. Minor damages and micro-scratches can be repaired with special repair products.
Fake diamond
Hydromassage bathtubs from this material look luxurious and presentable. They amaze with their unusual shapes and original shades. This material easily tolerates temperature extremes and exposure to chemicals. This expensive jacuzzi option is usually custom made.
Shape and size
It is very important to consider these parameters before buying such useful and necessary sanitary ware, because the jacuzzi must fit into the bathroom, go through the doorway, leave space for lockers and free movement around the bathroom. If the spa bath was not made to order, then often in retail outlets you can see products of this form:
- Rectangular;
- Round;
- Oval;
- Corner.
The standard traditional solution is a rectangular hot tub. It fits perfectly into most interiors, while leaving free space for movement around the room. In contrast, round or oval baths are demanding on the availability of free space and a large area of the room. Their installation is carried out in the middle of the room or in the corner. This jacuzzi is designed for 5-7 people taking water procedures at the same time.
The small bathroom area poses a challenge for residents. In this case, it would be most appropriate to purchase a corner model that will harmoniously blend with the rest of the interior.
TOP hot tubs
The correct selection of a whirlpool bath depends on its durability and comfort during operation, so the editorial staff of “bestx.htgetrid.com/en/” have selected the models that have proven themselves in the best possible way when used in domestic conditions.
Hydromassage corner bathtub Aquanet Bali 150 × 150
A corner acrylic jacuzzi of a Russian manufacturer will allow you to plunge into the world of serenity of a tropical island. The bowl is made in the form of a shell, and the smooth lines of the plumbing resemble plant leaves. Reception of water procedures is designed for one person. The set includes 6 nozzles, but the front panel, handles, headrest and mixer will have to be purchased separately. The dimensions of the product are 150x150x53.5 cm. The volume of the bathroom is 330 liters. The cost of this plumbing is 16,200 rubles.
Advantages:
- Roominess;
- Convenience;
- Design;
- Takes up little space;
- Quality;
- Volume;
- Anti-slip bottom coating;
- Resistant to high loads;
- Anatomical lines of the font;
- Comfortable back slope.
Disadvantages:
- Demanding for gentle cleaning;
- Water procedures are performed while sitting.
Acrylic bathtub Jacuzzi Nova Top AQS
The unusual rounded shape of the Italian manufacturer's Jacuzzi will make sanitary ware a pearl of any interior. The product is made in hi-tech style. The sides of the plumbing fixture have a wooden finish. The model has 3 seats, and the hydromassage is adjusted to the needs of each user.The innovative self-cleaning system makes cleaning your whirlpool tub easy and convenient. The presence of a built-in water heater allows maintaining the required temperature for a long time. 3 persons can take water procedures at the same time. Lateral massage is performed with 6 nozzles, while back massage is performed with 4 nozzles. Product dimensions are 180x180x51 cm. Sheet thickness - 0.7 cm. Volume 650 liters. The cost of the Jacuzzi is 1,140,200 rubles.
Advantages:
- Underwater lighting;
- Disinfection system;
- Design;
- Electronic control;
- Multifunctionality;
- Italian quality;
- Convenience;
- Safety;
- Self-cleaning system.
Disadvantages:
- There is no provision for the installation of additional devices for aromatherapy, chromotherapy, ozonation and air massage;
- Expensive acquisition;
- Lack of anti-slip coating;
- Takes up a lot of space.
Gemy G9052-II B
The rectangular acrylic hydromassage bathtub features a back-to-wall design. The jacuzzi is equipped with a shower head, mixer with spout, removable panel, radio, headrests. At the same time, 2 people can take water procedures in it. The pump power is 1500 W. There are 17 nozzles for hydromassage. The dimensions of the product are equal to 186x151x82 cm. Volume - 600 liters. The cost of the Jacuzzi is 150,800 rubles.
Advantages:
- Luxurious design;
- Multifunctionality;
- Several types of massages;
- Backlight;
- Pneumatic control;
- Technical equipment at a high professional level;
- Considerable size;
- Wooden overlay on the side;
- The quality of the acrylic coating;
- Brand;
- Radio under the bathroom;
- Loudspeakers with low frequencies;
- Anodized steel frame;
- Chromotherapy;
- Adjustable hydromassage jets.
Disadvantages:
- Suitable for large bathroom only;
- Expensive plumbing;
- Difficulties may arise during installation;
- It is inconvenient to wash.
Riho miami
The rectangular wall-mounted bathtub of the Czech manufacturer is made of white European acrylic. It is designed for one person. In the manufacturing process, plumbing is treated with an antibacterial compound. The design is designed for the installation of air massage, ozonation, underwater lighting, chromotherapy, hydromassage and disinfection systems, but it may well be sold without these additional functions. The volume of the bath is 220 liters. The dimensions of the product are 180x80x44 cm. The cost of the Jacuzzi is 37,000 rubles.
Advantages:
- Moderate noise level;
- Easy to care for;
- Aesthetics;
- Design;
- Warm surface;
- Strength;
- Lightweight construction;
- Ease of installation;
- Value for money.
Disadvantages:
- Acrylic thickness;
- Scratches remain on the coating;
- Rear shelf width;
- At high humidity, the sealant begins to taper.
Bach Elina
An Italian-made acrylic rectangular bathtub is designed for one person. There are 6 jets for hydromassage. The ergonomic shape of the backrest allows you to feel comfortable in any position. Strengthening of acrylic is carried out through the use of polyurethane, which is completely safe for the body. An impact-resistant backing adds strength to the bath, protecting it from mechanical and chemical damage. Product dimensions are 170x73x57 cm. Bathroom volume - 200 liters. The cost of this jacuzzi is 20,300 rubles.
Advantages:
- Convenience;
- Safety;
- Design;
- Quality;
- Air massage;
- Cost;
- Electronic control;
- Chromotherapy;
- Backlight;
- Anti-slip bottom coating.
Disadvantages:
- The noise of the hydromassage;
- The system requires flushing once a month with special cleaning agents.
Triton PEARL-SHELL
A corner acrylic bathtub from a domestic manufacturer made a splash among many compatriots. The non-standard form of the jacuzzi will perfectly decorate and complement any bathroom interior. One person can take water procedures in it.It is possible to purchase such a bath separately or order it together with the installation of hydromassage, lighting, air massage, chromotherapy. The hot tub is equipped with a reclining backrest and a headrest projection. The dimensions of the product are 160x104x60.5 cm. The volume of the bathroom is 220 liters. The cost of the Jacuzzi is 17,500 rubles.
Advantages:
- Design;
- Glossy finish;
- Cost;
- Convenience;
- Safety;
- Support on a rigid body;
- The ability to adjust the height of the sides;
- Aesthetics;
- Roominess;
- Easy to care for;
- Anti-slip bottom coating;
- Strength;
- Quality;
- The form;
- The size;
- Material;
- Water cools down for a long time due to low heat transfer;
- Multifunctionality.
Disadvantages:
- Water can flow under the bathtub, since the design of the shower neck with a hose is poorly thought out;
- It is inconvenient to reach for the faucet outside the bathroom;
- Once every six months, you have to renew the sealant layer at the junction with the wall.
Wachter Irma Chrome
This bathtub has an asymmetrical design. The bowl of the font is distinguished by smooth curves and elements, which are realized taking into account the structure of the human body. The jacuzzi has a pair of protruding headrests and a small niche. The hydromassage system includes 8 nozzles. The dimensions of the product are equal - 169x110x50 cm. The volume of the bowl is 320 liters. The cost of the jacuzzi is 43,230 rubles.
Advantages:
- Hydromassage of legs and back;
- Anti-slip bottom coating;
- Asymmetrical shape;
- Convenience;
- Safety;
- Compatibility with any interior;
- Quality;
- Domestic manufacturer.
Disadvantages:
- Mechanical control;
- An expensive purchase.
AM.PM Spirit Evo
The attached, built-in acrylic jacuzzi has a rectangular shape. For lateral massage, there are 8 nozzles, and back hydromassage is carried out using additional 6 nozzles. Their design allows you to adjust the direction of the jet at the desired angle. One person can take water procedures in the bathroom. The hot tub is installed on a welded frame made of galvanized steel. Thanks to the well-designed shape of the bath, it is a pleasure to swim in it. The control is carried out pneumatically. The backrest angle is 125 degrees for back support and maximum immersion. Material thickness - 6 mm. The dimensions of the product are 170x58x70. The volume of the font is 520 liters and the weight is 28 kg. The cost of the Jacuzzi is 62,990 rubles.
Advantages:
- Sophisticated design;
- Ease of installation;
- Ergonomics;
- Keeps you warm;
- Anti-slip coating;
- Convenience;
- Pleasant tactile sensations;
- Effective sound absorption;
- Design;
- Quality;
- Compactness;
- Reliability.
Disadvantages:
- The water from the sides does not roll back into the bathroom;
- Cost;
- Acrylic needs careful care using special products.
Having familiarized yourself with the most popular models, you can choose plumbing fixtures for your home without much difficulty. If you have experience using the hydromassage baths described in the article, share your experience in the comments.
