Best electric spray guns for 2020

Brushes and rollers are good tools, but when it comes to giving a glossy and uniform finish, they are useless. Therefore, professionals do not even focus on this and use a special electric spray gun. It is an inexpensive tool that will simplify your daily tasks several times over, while not consuming a lot of energy and being highly reliable. The editors of the site "bestx.htgetrid.com/en/" have prepared for you a rating of the best electric spray guns for 2020.

How to choose a power tool

When an inexperienced person comes to the store and tries to find the necessary device on his own, while ignoring the help of a specialist, he is unlikely to find a worthy option. It often turns out that the most expensive are bought, only because of the principle: "The higher the price, the better the quality." However, this does not apply to all types of power tools. Expensive devices are good, but you cannot give up on budget models. If earlier the low price was due to disgusting components, now, in some moments, things are different. Even if we compare phones, no one in 2010 could have thought that they could afford to buy a smartphone for 10,000 rubles and it would not freeze, and the quality of photos would be no worse than that of some flagships. The situation is the same with spray guns, before it was almost impossible to find a budget model for an acceptable price, now the market is replete with them.

There are two types of electric spray gun commonly found on store counters: pneumatic and non-pneumatic. Thanks to this, a person will be able to choose a more suitable option for his situation. The main difference between the two types is that the pneumatic model has a compressor. While in the other version, the paint goes to the nozzle, using a pump, and does not interact with air.

It is important to consider here that if a person needs to paint a product with high quality, as in the best salons, then the option that is equipped with a compressor should be preferred. Because the blowing air breaks the paint into dust, which contributes to an even coating. In the opposite model, the paint is shattered by the pressure generated by the piston pump. Of course, in the latter version, the quality will not be so high, but for home use it is a good option.

What to look for when choosing a spray gun

The first thing to start with the choice is a visual inspection. The main thing is to pay attention to the material of manufacture. All budget models are made of plastic, of course, you won't have to wait for special durability here. Because this material wears out quickly, and certain types of material are subject to the strongest solvent effects found in some types of paints. It will be good if the body is made of plastic, and the nozzle is made of metal elements, this option will be more optimal and will last 1.5-2 times longer than the cheapest models.

In addition to durability, the material of the body indicates to the buyer the type of paint with which the spray gun is capable of working. For example, if a person needs to use water-based paint, then even buying the most budget model, where almost every detail is made of plastic, gives him such reliability. However, these are isolated cases, because there is no practicality in such tools, it is much better to buy a universal device that works with paints of any kind.

But it is important to understand that the cost of such a paint sprayer will be several times higher than that of a conventional model, but the functionality and efficiency will fully pay off. Such devices are more intended for professional use, but if there is an urgent need, then they can be bought for ordinary people. And to find out what types the device is intended for, just refer to the instructions that come with the kit.

If the case from which the device is made is an important part when choosing, then the only technical characteristics that beginners focus on is power. You cannot think that this is the main indicator, and the quality of work depends only on it, because the parameter is calculated for a specific design, and the spray gun will cope with its main task at 300 W, almost the same as at 600 W.

If a person wants to save money on the purchase of an electric tool, then he should know that Chinese devices, the price of which is 800-1,000 rubles, have a number of disadvantages that will not allow the work to be carried out quickly and efficiently. So the air flow will be directed anywhere, but not to the designated place, and the device will be very noisy. Of course, if a person is a jack of all trades, he will correct all these shortcomings, but there is not much sense in this, because it is better to buy one electric spray gun, but for a long time, than to spend every month or two buying a new one, but cheap.

What is a professional spray gun: how to use it

After a person buys a good device for themselves, the first problem they face is proper use. However, there is nothing complicated in this, first the user needs to decide on the method of charging the paint inside the container. It is not possible to do this by simple transfusion. To do this, it is necessary to give the substance a specific density; this can be done only by diluting the product to the desired consistency. To simplify the task, most users equip their products with special bowls that will help a person correctly determine the viscosity.

The main point when applying paint, when using a special electric tool, is the selection of a nozzle. All expensive models are equipped with several nozzles that can be easily changed for a specific type of paint, which is a practical solution and makes the device universal. In addition, the quality of spraying will depend on the selected element, so it is necessary to choose according to the principle: "The thicker the paint, the larger the spray nozzle should be."

Paint application: the basics

In order for the surface of a product or a specific area to be perfect and cause only delight, it is important for a person to know a few key points that will help him bring his ideas to life without problems.

• It is important to pay attention to the distance of the nozzle to the surface that is being "modernized", so a good indicator will be 10-15 cm. This value will eliminate the possibility of drips or paint volatilization into the air. Therefore, this should not be neglected.
• Correct movement also affects the final result. It is important for a person to smoothly and accurately move the spray gun over the surface, only then can uniformity be achieved. The user should make movements not from top to bottom, but left and right, while smoothly descending. Then the result will always be of high quality.
• In addition, it is necessary to pay attention to the direction of the jet, which should be directed at 90 degrees to the surface to be painted.

Proper maintenance of the instrument

But even the most expensive devices from a branded manufacturer will not be able to last a long time if they are not looked after or done incorrectly. To clean the instrument, you must first detach the paint container from the body and drain any unused residue. Next, you need to put the solvent inside the tank and shake it, which will take about 60-90 seconds. Then all this merges and the process is repeated again, only this time a person needs to spray for a second in order to clear the channels of paint residues.

Upon completion of cleaning the tank, it is necessary to start removing marks on the nozzle. To do this, moisten a clean cloth with solvent and wipe the element. This is the final process that will keep the device clean and allow it to operate for more than the specified period.

Rating of the best electric spray guns

BOSCH PFS 2000

An excellent device that will allow you to paint quickly and efficiently. Its power is only 440 W, while the work is carried out from a home network with a voltage of 230 V. The volume of the tank will be enough to produce almost any type of painting without constant recharging. In addition, the container has a convenient bottom position.

The spray gun is designed for painting lacquered furniture, walls or metal gates. Works with almost all types of paints, as well as with antiseptic, oil, glaze, enamel, etc. The noise level when switched on is 79 dB. The material is applied at a speed of 2 m² per minute. The weight of the power tool is 2 kg, so the hand is not particularly tired. The manufacturer provides a 2 year uptime warranty.

The average price is 5,000 rubles.

Advantages:

Disadvantages:

Bort BFP-400

Another quality device that is perfect for working with furniture and various walls. The supply is carried out by a reliable manufacturer that has established itself on the market for several years. Power is supplied from a 230 V network. The volume of the tank is standard - 0.8 liters.

For convenience, there is a viscometer that will allow you to accurately determine the degree of viscosity of the material to be sprayed, which is a very practical solution. The device interacts well not only with paint, but also with enamel and varnish. There are several spray methods: circular, vertical and horizontal.

The average cost is 2,550 rubles.

Advantages:

Disadvantages:

WAGNER W 450

A beautiful spray gun from a top manufacturer that will appeal to the user due to its unique design. The output atomization power is 110 W. The main power source is a socket with a voltage of 220 V. A big plus is the volume of the tank, which is 1.3 liters. The maximum hose length is 1.8 meters. Noise level - 85 dB. There are only two spraying methods: vertical and horizontal. In addition to working with paints, the device is designed for spraying plants, which is also a great advantage.

The average cost is 7 450 rubles.

Advantages:

Disadvantages:

RYOBI P620-0 ONE +

An excellent device that does not work from the mains, but from the battery, while providing high-quality painting. The volume of the tank reaches 1 liter, which is enough to carry out some types of work in one go. For the convenience of tracking the viscosity of the material used, a viscometer is used. It is intended for household use only, therefore it is not suitable for painting a car. Application speed - 4 m² per minute. Weight - 2.36 kg.The design is pleasant, so the device will delight not only with performance, but also with its appearance. The batteries used are Lithium + / IntelliCell. The only drawback is that there is no battery and charger in the kit, so a person needs to get these devices on their own. The manufacturer's warranty is 2 years.

The average cost is 6,900 rubles.

Advantages:

Disadvantages:

STAVR KE-800

High-quality Russian spray gun with a power of 800 W and a tank volume of 0.8 liters. The device is made of high quality plastic, and not from the secondary, like some Chinese models. Therefore, it is not subject to rapid wear, which makes the use of the device reliable and the user can be sure that the sprayer will not fall apart after a month of operation.

There is an air supply adjustment, which is a good solution and allows a person to choose the optimal settings for a specific situation. The average speed is 0.40 liters per minute. When painting, it is important to observe the operating mode, therefore, every 15-20 minutes, the device should "rest" for 5 minutes. Only in this way will the owner provide the device with durability.

The average price is 3,100 rubles.

Advantages:

Disadvantages:

DIOLD KRE-3

Another good device from a quality Russian manufacturer, which will make it possible not only to paint, but also to spray some plants. The power of the device reaches 600 W, while painting takes a minimum of time and brings maximum efficiency. Power is supplied from a network with a voltage of 220 V. The container for the material is at the bottom.

To extend the performance, the manufacturer has equipped the device with a quick cleaning system and a viscometer. Therefore, the user will be able to determine not only the optimal viscosity, but also quickly service the spray gun at the end of the work, which is also an excellent solution.

The average cost is 2,500 rubles.

Advantages:

Disadvantages:

PATRIOT SG 550

An electrical device thanks to which any work will take a few minutes. The great advantage is the efficiency of the sprayer and its high efficiency. In this case, the power is only 500 watts. The compressor block can either be placed on the floor or fixed on the back, it will not get in the way. The volume of the tank reaches 0.7 liters. Hose length - 2 m. Designed for household work.

The average cost is 3,300 rubles.

Advantages:

Disadvantages:

Finally

Painting can give an interior or a separate product an unusual and fresh look. However, one cannot disdain the work, because the final result depends on it. Therefore, if a person wants quality, then he will have to make every effort to this. If you have experience in using electric spray guns described in the rating, or more interesting representatives, tell us about it in the comments.