Best milking machines for 2020

Milking livestock by hand has long been a thing of the past. It is much more convenient to use a special apparatus that allows you to quickly get milk without feeling tired. Such devices are purchased for both large industries and small farms. Choosing the right device requires a correct and wise approach, our article will help you make a good purchase.

What it is

The milking machine is a vacuum pump operated device.

The pump can function thanks to engine oil, but this method is inconvenient, since it requires constant monitoring, checks, in addition, equipment of this type can quickly fail in the cold season. Of the advantages, it is worth highlighting silent work.

There are also dry look models. They are very easy to operate, do not require special skills, but they are very noisy.

Who will need

Such units should not be bought by the owner of one or two cows; such equipment will require more effort to maintain. But for a farmer with more than three livestock, a milking machine will become a necessity, especially if there are other responsibilities. Also, for people suffering from severe back pain and diseases of the musculoskeletal system, such an acquisition will not be superfluous.

Sometimes there are cases in which an animal simply does not allow itself to be touched: individual characteristics of a cow, anatomical defects (flat or sore nipples). In such a situation, the use of a milking device will become a necessary measure.

Criterias of choice

We have already described the features of the pump above. In addition, there are a number of other parameters to consider. In order not to make a mistake when choosing, we advise you to pay attention to the following characteristics.

Pulsator

This element is responsible for milking speed and volume. It is he who is superimposed on the udder of the cow. Also, a properly selected device will allow the animal to transfer milking more easily and protect it from mastitis. What options are there?

• Unregulated pulsator - the element converts a constant vacuum into pulsating pulses. During milking, the vibration of the membrane is replaced by rest for the animal. Then the next cycle begins. During operation, milk is completely pumped out of the udder. Such units are loved for their unpretentiousness, ease of operation and repair, as well as for their low cost.
• Pair milking - this device simulates hand milking. The cost of such models increases significantly. Two nipples alternately participate in the process, while the other two are resting. The unit will protect the animal from complications that arise in case of overfeeding. We recommend purchasing machines of this type for large farms where the issue of livestock health is acute.

Both types of pulsator do not affect milk supply in any way, but milking in pairs ensures that the animal is protected from injury in the process.

Advice! Not a single veterinarian advises the machine to milk the last drops from the cattle. Better to interrupt the automated process and get the leftovers manually. Otherwise, the cow or goat may develop mastitis.

Collector

This part of the unit consists of several hoses, one tube is connected to a vacuum distributor, four others are combined with rubber bands that are applied to the nipples. These hoses are combined with a massive one that drains milk into the container. The larger the collector volume, the more intensively it is filled.

The standard volume is 140 cubic meters. cm, you can also find 240 cubic meters on sale. cm. If we talk about ordinary operation and milking 2-3 cows, then it is better to choose a standard system without overpaying for an increased capacity. But if we are talking about a large farm, then you should not skimp on a large-volume collector.

Manufacturing material

When it comes to technology, this point should be given maximum attention. This parameter is responsible for the life and safety of operation. So, for example, the glass of the apparatus can be made of plastic. This will reduce the cost of the product, but it will make it unreliable for winter use. Plastic containers, unable to withstand low temperatures, often burst and crack. Also on sale you can find glasses made of stainless steel or with a metal cylinder. They are distinguished by a high level of strength, but they are somewhat more expensive.

The lid of the container into which the milk flows also affects the price of the machine. It can be made from polypropylene or metal. We recommend purchasing a device with a replaceable plastic cover. So the user can save money by purchasing the required item later. It is also worth considering that careful operation of the unit will allow even the most fragile parts to serve for a long time.

Terms of use

The milking machine should be serviced daily. What does care include?

1. Even the smallest amount of milk must not be left in the appliance.
2. The entire system must be thoroughly cleaned after use. Milk is an excellent medium for the development of pathogens. The device can be washed with clean running water.
3. Once every seven days, the tubes are washed with brushes, and the outer part with a dry cloth to remove dust and external contamination.

Rating of the best milking machines

For cows

DeLaval Mmu11

The Swedish brand produces a versatile and convenient device that is approved for use in both cows and goats. The unit is reliable, it meets all the requirements of international organizations, only high-quality and efficient elements are used in its design. Also, users praise the device for its high level of security. Positive reviews inspire confidence in potential buyers. Such a model will be required in a large farm when it comes to high-quality, uninterrupted milking that does not cause discomfort to the animal.

The device is easy to move and hygienically clean, despite its heavy weight - almost 70 kg. The pump is dry type, the noise level is low, there are additional hoses for greater ease of use. The energy consumption is low, which once again confirms the need to use the model for large livestock.

Advantages:

Disadvantages:

The average cost is 65,000 Russian rubles.

Farmer ADE-03M CR

Productive unit of domestic production, type - dry. This design will provide the user with savings not only in finance (no need to spend money on oil and additional maintenance), but also time savings - the equipment is able to milk two cows at the same time.

The weight of the device is small, it is only 27 kg, so it is so easy to transport it when needed. All manufacturing materials are safe and certified, there is a manufacturer's warranty. In addition, there is additional protection against the ingress of liquids on a running engine.

Advantages:

Disadvantages:

The average cost is 25,000 Russian rubles.

Burenka Tandem

A great option for a small family business. The device can work with several animals at once, providing a high level of productivity and safe milk yield. There is no need to finish the process manually, since the udder is emptied as efficiently as possible, but, most importantly, the animal will not suffer from such a technique at all.

All constituent elements are made with high quality, control will not raise questions even for beginners. The special design will protect the animal from infection and mastitis. The attachments are made of silicone, which guarantees a delicate process. Quiet operation also does not have a traumatic effect on the animal, which increases milk yield and milk quality. Dry type vacuum pump.

Advantages:

Disadvantages:

The average cost is 35,000 Russian rubles.

Melasty TjK 1-AK

The Turkish unit will delight users with a long service life and resistance to prolonged loads. Despite the fact that the device is equipped with a dry-type pump, it does not make a lot of noise during operation and perfectly tolerates low temperatures. Of the component parts, a pump that has undergone special processing should be distinguished. Thus, the farmer will receive a large amount of milk in a short time.

During operation, observation by the operator will not cause him fatigue, and the animals also do not experience discomfort. The adaptation period to automatic milking is fast enough. The pair milking pulsator simulates the manual process, which is also not averse to the livestock. The strength of all the constituent elements does not cause any complaints from the user; all parts serve for a long time without causing unforeseen breakdowns. The udder pad is made of safe rubber that does not cause allergies in the animal. Small dimensions of the model will make it easy to transport, store and carry out hygienic processing. The device can serve for at least 8 years.

Advantages:

Disadvantages:

The average cost is 32,500 Russian rubles.

Ard-U2200AL

And one more representative of the device with a paired milking pulsator. The unit completely empties the udder of the cow, delicately removing all milk residues. The device easily adjusts to the individual characteristics of each animal, guaranteeing a painless process. According to the manufacturer, the use of this technique will increase the total amount of milk received.

A special trolley is included with the device, which makes it easy to transport the device. This model is useful in a large farm where you need to quickly handle a large number of livestock. Although the unit is powerful and efficient, it does not consume a large amount of electricity.

Advantages:

Disadvantages:

The average cost is 57,000 Russian rubles.

For goats

DaMilk AID-1

The convenient device will delight the user with ease of operation. The unit is easy to maintain and does not cause rejection in animals. The long service life will delight the farmer, the special design will protect the body from falls and shocks from livestock.

The components are made of durable materials. Stainless steel glasses are not afraid of frost and temperature extremes. The lid of the device is made of aluminum, high quality liner. Also, the manufacturer took care of safety: there is an engine protection against overheating, food hoses do not contain toxic materials.

Advantages:

Disadvantages:

The average cost is 20,000 Russian rubles.

Lider 20.2

The domestic product is made from the highest quality components. The model is universal, it can be used not only for goats, but also for cows. The dry pump is designed for a long service life. The engine power is able to serve one animal without interruption. The pulsator is combined: it combines double milking and synchronous milking. This eliminates the need for additional hand milking.

According to reviews, the product is not prone to breakdowns and frequent repairs. Management is straightforward, exploitation is not capable of developing complications and pathologies in the animal. The rugged construction will withstand years of service in farming of all sizes.

Advantages:

Disadvantages:

The average cost is 34,000 Russian rubles.

Mini Milka MDU - 5K

Ideal for a small farm. Using such a unit, the user is able to quickly and efficiently obtain large volumes of milk. The main advantages of the product include its productivity - it is able to serve the livestock daily for 15 years. There is a system that controls the filling of the udder, which will not allow harm to the animal. If there are restless animals in the herd that do not allow the operator and the apparatus to approach them, it is possible to milk from a distance. A long hose is provided for this.

Long service life will not affect the engine; it is reliably protected from burnout and heating. Also, do not be afraid of temperature changes and cold air. The system is designed with these features in mind.

Advantages:

Disadvantages:

The average cost is 22,200 Russian rubles.

Dairy farm 1K

Our rating is completed by an easy-to-use unit. It is not difficult to transport it, for this it is equipped with wheels. The oil pump can cause some additional concerns, but it guarantees a quiet level of operation. The power of the device is more than enough for daily maintenance of ten or more goats.

The noiselessness of the model has a positive effect on the state of the animal, due to this, there is no violation of lactation. Equipment breakdowns are rare, flushing the system and replacing components is not difficult. If necessary, it is not difficult to buy the required part, they are always on the shelves of the corresponding stores.

Advantages:

Disadvantages:

The average cost is 23,000 Russian rubles.

If you had experience using the products described in the rating, write your feedback in the comments.