⛓ Best car lifts for car service for 2020

It would seem that it could be easier than choosing a lift, but here there are subtleties and nuances that a person should pay attention to. After all, the modern market offers a variety of designs that differ in appearance, maximum carrying capacity, control and transportation methods. Each parameter makes the device useful or of little demand, therefore, when purchasing equipment, all features are taken into account.

The editors of the site "bestx.htgetrid.com/en/" have prepared for you a rating of the best car lifts for car service for 2020.

Varieties

The principle of operation and technical device are the same for all lifts, so there is no point in going into technical details. Moreover, in the event of a problem with the design, a special company will be called, since the car mechanic is unlikely to be able to fix it.

There are several popular types that workers use to repair an engine or chassis. The main difference between the equipment is:

• The design itself, which can be screw, electromechanical, one or two-post, etc.
• Maximum operating weight and lifting height;
• Dimensions and weight of the car lift;
• Power consumption.

To better determine the choice, it is important to navigate the design, the rest of the parameters can be selected later.

Single column

The main distinguishing feature of such devices is the presence of 1 vertical rack, along which a special frame, equipped with several auxiliary elements, moves. The product is designed for full or one-sided lifting of the vehicle. Some manufacturers produce models that can be moved, while others create massive structures that exclude this possibility. The maximum carrying capacity of the latter is 2.5 t, while the latter has a limit of 250 kg.

The single post car lift is equipped with a mechanical, electric or combined drive. It has a small size, which makes it possible to place the equipment even in small rooms. Mobile car lifts are in great demand when carrying out tire fitting, since a convenient design allows you to use a minimum of effort, but get a high result.

Two-column

Based on the name, you can easily determine what is the main difference between this option and the previous one. Thanks to the two uprights, the person is able to control the movement up and down on each side. The brackets are equipped with two supporting legs, it is on them that the car rests when lifting. The front elements can rotate 180 degrees and change length. This feature allows you to adapt to almost every vehicle.

Most often there are mechanisms with a symmetrical or asymmetrical design.The models differ in carrying capacity and the ability to work with machines where there is a wide base. The device of the first type is capable of lifting vehicles weighing up to 5 tons, the second option is 4 tons.

In addition, a person is able to choose the version of the racks themselves. Models are sold that rely on a floor frame, which is a suitable option in rooms where there are fragile floors. The second option is products with a "clean" floor, the main advantage is that a car entering does not experience any difficulties.

Four-column

This is a more advanced option, which includes 4 vertical posts and a work surface that moves along them. The platform is equipped with special hydraulic cylinders that raise and lower with minimal sound, which allows for quiet operation. Another advantage is the optimal height, which provides a comfortable ride for vehicles with low ground clearance.

The following platform types are distinguished depending on the selected model:

• With a smooth surface;
• Long;
• Equipped with special elements that allow for tire fitting;
• With a small lift, which is installed additionally.

Screw

The classic version, which is familiar to every car owner. The movement of the mechanism is carried out due to rotational movements. Each model consists of 3 main parts:

• Screw;
• Nuts;
• Special gearbox.

The principle of operation may differ for some products. There are retractable models and rotating ones. In the second version, the nut rotates, and in the first case, it is stationary. The efficiency of the device is 25-90%, the drive can be manual or electric.

Scissor

The peculiarity of the equipment in the execution of the lifting part, which is an X-shaped structure, which is equipped with special elongated parts. They are connected using hinges, and are located in a vertical plane. The lower elements are fixed by the support part, while the upper ones have adjustable ladders that adapt to each vehicle. Raising and lowering is carried out using the control of the lower base. The scissor drive is most often hydraulic, so the product operates with minimal noise.

Differences by drive type

Hydraulic

Such products are equipped with a good hydraulic drive, due to which the vehicle is raised and lowered. Like any device with a similar element, they work without unnecessary noise, which improves the working conditions of auto mechanics.

Lifts can be produced in various shapes, but the standard version is a plunger. Such equipment has a simple circuit, which is why anyone who has technical knowledge can connect or repair it.

The hydraulic cylinders are placed vertically, and the legs, together with the platform, are fixed at the end of these elements. If a person decides to place the structure inside the floor, then the product will acquire a secretive look, and will not interfere with workers, and will also save space. The main advantage of this option is free access to the car from all sides.

Electrohydraulic

In the drive of such structures, two devices are used at once - an electric motor and hydraulic cylinders. Unlike electromechanical products, this option has a number of strengths:

• Low energy consumption;
• The noise level is reduced;
• The work becomes smooth;
• The lifting and lowering speed increases.

These parameters allow you to carry out repair work efficiently and reliably. Therefore, in many expensive car services, only such structures are installed.

Features of the electromechanical drive

Equipment operating with this drive is used in many budget and medium-sized garages. The main advantage is efficiency and simplicity of design. The main working element is a screw-nut. This is the busiest part that needs special attention to avoid premature failure.

How to choose the best option?

The first thing to start with the purchase of such a unit is drawing up a business plan. A person must evaluate the activities of a car workshop and calculate the effectiveness and prospects.

For this, it is determined:

• List of ongoing repair operations;
• The types of vehicles to be serviced;
• What are the power supplies;
• The maximum area that is used for the installation of the structure;
• Money spendings.

After answering these questions, the user will select the appropriate option.

Rating of the best single post car lifts

MONOLIFT 800 Werther

Electromechanical product capable of lifting up to 800 kg. The main advantage is free movement around the room and small dimensions. The power of the electric motor is 2.6 kW, power is supplied from a 380 V network. It is made of anti-corrosion materials that can withstand the conditions of any weather.

Sold at a price of 256,200 rubles.

Advantages:

Disadvantages:

PP-1-01

A simple lift that is used in budget car services, and can also be used at service stations. The structure consists of a stand, a carriage, a special screw, nuts, a control unit and a switch. On the right, there is a brake lever so that the product does not go to the side. Drive type - electromechanical. It is powered from a 380 V mains, maximum power - 1.5 kW.

Sold at a price of 95,000 rubles.

Advantages:

Disadvantages:

PROFIMASTER 3000 (Austria)

A mobile car lift that can handle almost any task. The maximum lifting capacity is 1.2 tons. It is powered by 220 V, while the energy consumption is 1.1. kW, which makes the product economical. The product does not require an oil change or complicated installation, it is enough to buy it and put it anywhere.

The cost is specified when ordering.

Advantages:

Disadvantages:

Sorokin 17.25

A mobile mechanism capable of lifting up to 2500 kg. It is used in large service stations and small workshops. Power consumption - 1.5 kW, operates from 380 V. The lift is fully processed and painted, which allows to increase anti-corrosion properties. The maximum ascent time is one minute.

Sold at a price: from 300,000 rubles.

Advantages:

Disadvantages:

Rating of the best two-post devices

TA-901 SKYTEXON

A budget but effective device that will suit many car service owners. The maximum lifting capacity is 4 tonnes and the lifting speed is less than one minute. For greater convenience, the manufacturer has equipped the product with a bottom sync. The design allows you to work with small cars and large vehicles.

It is sold at a price of 84,500 rubles.

Advantages:

Disadvantages:

P-97MK

The device is intended for repairing passenger cars. The uprights are made of a special profile, so they have good fixation.The main parts are made of wear-resistant material, so the user does not have to worry about the quick replacement of equipment. The power of the electrical equipment is 1.5 kW, it rises up to 3.2 tons.

Sold at a price of 135 600 rubles.

Advantages:

Disadvantages:

Storm 6140

Excellent equipment that is suitable for various purposes: from tire fitting to full repair. Device type - two-column with bottom sync. The product is capable of supporting up to 4 tons. Manufacturer's warranty - 2 years. Pick-up height from 100 mm. There are electric locking mechanisms.

The average cost is 139,000 rubles.

Advantages:

Disadvantages:

AE&T S4D-2E

Electro-hydraulic lift, which is suitable for servicing passenger cars or small trucks. The structure is a metal frame equipped with a pair of hydraulic cylinders. The equipment can be used in various workshops as well as in assembly shops. Maximum lifting capacity - 4 tons.

The average price is 185,000 rubles.

Advantages:

Disadvantages:

Top best four-post products

STD 6764

The lift allows you to work with cars and trucks. Equipped with a double niche for "camber-convergence". The distance between the columns is 2880 mm. The carriages are pneumatically locked. The maximum weight that the device can withstand is 6 tons. It is powered from a 380 V mains. Power consumption - 3 kW.

The average price is 500,000 rubles.

Advantages:

Disadvantages:

PL-4

The product is suitable for installation in technical inspection services. The drive is electromechanical and therefore does not consume much energy. There are two electric motors, installed power - 3 kW. The ascent time to full height is 120 seconds. The maximum vehicle weight is 4 tons. For functioning, it is necessary to connect to 380 V.

Sold at a price of 442,000 rubles.

Advantages:

Disadvantages:

PGA-4000/4

The device can be used in conjunction with 3D stands "descent collapse". Equipped with an automatic locking system, which increases the operational safety. The drive is electro-hydraulic, so the noise is minimal. It is powered by 380 V, while the power is 3 kW. The ascent time is 55 seconds.

The cost of the equipment is specified with the manager.

Advantages:

Disadvantages:

Popular scissor car lifts

Ermak PGN-3000N

The structure is made on a rigid frame, which increases the load capacity and reduces wear on the main parts. In addition, thanks to this solution, the user is able to move the device without fixing it with anchors, control is carried out using a special panel. The maximum weight with which the equipment works is 3 tons. The power of the electric motor is 2.6 kW. If an unscheduled power outage occurs, the employee will lower the car using a mechanical button.

It is sold at a price of 284,000 rubles.

Advantages:

Disadvantages:

ASTRA MINILIFT AE100.1

Pneumatic mobile car lift designed for lifting various parts. The compressor operates at pressures up to 8 bar. The main advantage is that it does not require a network connection.Therefore, emergency shutdown of the light will not affect the operation. The security system was developed using Spanish technology. The ascent time is 17 seconds.

The average cost is 76,500 rubles.

Advantages:

Disadvantages:

Werther Stratos SR / E (OMA532LP35)

The floor lift is easy to install and has a high lifting capacity (up to 3.5 t). For the safe conduct of various operations, the manufacturer has equipped the product with a function that protects the legs of a car mechanic. The ascent speed is 40 seconds. Power - 2.2 kW. The positive side of the device is that constant maintenance is not required.

The average price is 552,000 rubles.

Advantages:

Disadvantages:

Finally.

Lifts are an integral part of any workshop, thanks to which a person can carry out various repair work with comfort. If you have experience using the models described in the rating, or more interesting options, tell us about it in the comments.