🚗 Best car antifreezes for 2020

0

Antifreeze is an essential compound for a car, but most motorists prefer to use a cheap fluid. However, regardless of the brand of car, it is necessary to use only a high-quality product that will not allow the engine to overheat and not evaporate at the wrong moment.

The editors of the site "bestx.htgetrid.com/en/" have prepared for you a rating of the best automotive antifreezes for 2020.

Three colors, but one purpose

Most motorists try to operate with facts in favor of a manufacturer with a specific color. They prove that the color of a liquid speaks more of quality than composition. Arriving at the store and looking at the blue color, it is immediately determined that it is antifreeze, and when you see the G11 or G12 markings in an opaque container, in the eyes of many, the containers take on green and red colors, respectively. The color does not matter, the stereotyped palette does not always correspond to reality. The product can have any color, special pigments are responsible for this, which the manufacturer adds to make their product stand out on the shelf. This element does not affect the quality in any way.

Antifreeze is not chosen by color, the opinion of friends or the seller, when buying it, it is important to focus on the class, the main parameters, what composition of additives, tolerances, etc. At the same time, we must not forget about the engine, which is installed in the car, because it works with this liquid, and not a person.

Cars produced in the Soviet era have cast iron in the engine design, so the use of antifreeze is a normal practice. It is not allowed to use such a liquid for modern cars, where aluminum or other non-ferrous metals predominate, since the refrigerant will cause more harm than good. The car owner, after a couple of years of driving in antifreeze, will get acquainted with corrosion, cavitation, various precipitates that will trigger irreversible consequences in the operation of the internal combustion engine. It is important to approach the question of buying liquid responsibly.

Fake is cheaper than the original

In specialized stores, large hypermarkets, markets and even on highways, there are hundreds of models of antifreeze. Some of the products are marked with an inflated price tag, the second representatives have a democratic cost. Price is not the main selection criterion, because fakes are found both in the budget and in the premium segment, the only difference is in the number of non-original products. It is best to buy only high-quality goods, focusing on the technical passport of the car, where the recommended brands and brands are indicated. A person will not find better formulations from the manufacturers indicated in the accompanying documentation.

When buying a non-original product, the motorist must make sure that the vehicle manufacturer allows the use of such a fluid. The main thing is to choose a product according to its technical characteristics and composition, and put the color scheme into the background and not pay attention to it. Only in this way the car will not need constant repairs and will last for a specified period.

Criterias of choice

Concentrate or liquid ready to use. When choosing antifreeze for this parameter, it is important to pay attention to the area where the vehicle is used.When operating a car in regions where -40 is quite normal, it is better to buy a concentrate, which must be diluted with water (observing the proportions indicated on the package). In another case, when the temperature indicators are optimal for the finished liquid, it is better to give preference to this option. Its cost is several times lower and does not require additional actions.

Differences in class and color. The criterion indicates to the owner the specifics of the composition of the purchased liquid. The classification proposed by the world company Volkswagen is very popular in the automotive field. So, all used goods are divided into three groups:

  • G 11 Liquid developed on the basis of ethylene glycol and contains silicate additives. Used in many vehicles. The color used is green, there are models with blue and yellow shades.
  • G 12 Same base, only difference in additives, carboxylate elements are used here. There is a variant with hybrid additives, which may contain organic compounds. Presented in red, but can also be orange and pink.
  • G 13 Antifreeze with hybrid additives, but based on propylene glycol. The color is purple, less often yellow.

Each product of the presented groups has both advantages and disadvantages that may be obvious for one car and invisible for another. In addition to popular categories, there is an out-of-class liquid that has not found active use in the west: antifreeze. Care must be taken when working with this option. It is important to consider that:

  • It is impossible to pour domestic-made antifreeze into foreign cars. This will negatively affect the cooling system (CO), because not every foreign car shows high resistance to the effects of compound acids.
  • If brass and copper elements were used in the design of the engine and CO, then the best protection would be antifreeze from the G12 group, which has a red color.
  • G11 is used in vehicles that contain a high proportion of aluminum in the engine. So the motorist will protect the entire system from negative influences.
  • For comprehensive protection of the internal combustion engine and the cooling system, it is recommended to use G 13. It is a universal product that works without problems with all types of metal and does not cause harm.

Volume. An optional item, but worth paying attention to. Some motorists make mistakes in the amount of fluid they buy. The recommended value is 4-5 liters. This is completely enough, provided that there are no faulty components in the car that cause leakage. For old cars, 6-7 liters are bought, this is the optimal value, which will last for 5 years.

Nuances of choice

Most of the owners of expensive cars will not go to buy car fluid on their own. They will rely on professionals who will make the right choice. Unfortunately, this approach is not familiar to motorists in the middle and budget price bracket. Such people prefer not to waste their time and money, because they know the preference of the "iron friend". True, not everyone selects the optimal model, but they take it according to the principle "any will do, just not a fake." But questions about the service life and how much harm such a decision will bring are never raised by them.

Before pouring the purchased liquid, it is important to make sure that the product meets the following requirements:

  • The minimum temperature for boiling is 110 degrees Celsius;
  • The freezing threshold must correspond to the region where the vehicle is used;
  • There is no tendency to foaming and viscosity, or this value is at a minimum;
  • It is imperative that there are additives that will not provide favorable conditions for the formation of sediment inside the engine channels and the cooling system as a whole;
  • It is not allowed to use models that are highly aggressive to one of the types of metals that were used in the design of the engine;
  • Durability should be high, while the loss of useful properties is reduced to 0.

"Nezamerzayka" is most often made on the basis of ethylene glycol and propylene glycol - it is a dihydric alcohol. During the production of goods, distilled water is added to this element, as well as special additives that do not allow corrosion and provide heat transfer properties. It is forbidden to use alcohol in its pure form, because it contributes to the destruction of the aluminum alloy and other metals.

Rating of high-quality automotive antifreeze

SINTEC PREMIUM G12 +

A good carboxylate type product that will provide the user with adequate protection. It is used not only in foreign cars, but also in KAMAZ vehicles, which is a positive point. Freezing temperature - -40 degrees. Available in pink. There are dozens of positive reviews from different motorists. The service life is 4-5 years. Withstands negative temperatures, which makes it possible to use antifreeze in many regions of the country. Not prone to corrosion.

Sold at a price of 130 rubles.

SINTEC PREMIUM G12 +

Advantages:

  • Value for money:
  • Withstands negative temperatures;
  • Durability;
  • Improved heat transfer properties;
  • There are approvals from all brand manufacturers.

Disadvantages:

  • Incompatible with old antifreezes, so flush the system before use.

TCL LLC RED -50

An excellent finished product designed for use in many modern TOYOTA and DAIHATSU vehicles. The product has earned positive reviews from users and is in great demand in Russia. The minimum temperature for boiling is 111 degrees - this is the best option for most systems. Withstands negative values ​​down to -50 degrees, making it suitable for use in all regions. Does not leave any sediments and malignant compounds. Sold in many shops at a reasonable price.

The average cost is 340 rubles.

TCL LLC RED -50

Advantages:

  • The service life reaches 8 years;
  • Ready to use;
  • Corrosion protection;
  • Japanese production.

Disadvantages:

  • Not found.

CoolStream A-110

Lobrid concentrate suitable for use in harsh winter conditions. Sold in green. The freezing point is -40 degrees. Designed for use in many vehicles from Hyundai to Renault. It has positive reviews and stands out among competitors for its quality and reliability. It can be used not only in new cars, but also in used ones, the main thing is to clean the system before filling. Another positive point - the drain occurs without problems and takes a minimum of time.

You can buy it for 237 rubles in a popular marketplace. In stores, the cost of the product reaches 1,300 rubles.

CoolStream A-110

Advantages:

  • Does not cause a negative reaction from the cooling system;
  • Used in domestic cars that come from the factory;
  • Merges well;
  • Premium quality.

Disadvantages:

  • Not found.

HYUNDAI KIA CROWN LLC A-110

Antifreeze hybrid type, which has proven itself in many vehicles. It is produced by a popular company and has a high durability rate, which is a big plus for a liquid intended for a cooling system. Freezing temperature - -40 degrees, boiling occurs at 110. VGA tolerance index - G11. Sold in green. The product does not affect engine performance and prevents corrosion.

The average cost is 375 rubles.

HYUNDAI KIA CROWN LLC A-110

Advantages:

  • Reliability;
  • Long service life;
  • Good technical characteristics;
  • Low cost.

Disadvantages:

  • Not found.

VOLKSWAGEN G13 Ready Mix

A quality product from a popular brand that will fit most car cooling systems. It is used in many service centers and shows excellent results even after 5 years of continuous operation. The sale is carried out in purple.It has a tolerance index - G13, which makes antifreeze a universal agent and excludes a negative effect on the metal elements of the engine. The product is branded, so the cost is high, but the quality is also at a decent level.

Sold at a price of 650 rubles.

VOLKSWAGEN G13 Ready Mix

Advantages:

  • Versatility;
  • Branded goods;
  • Ready to use immediately;
  • Reliability.

Disadvantages:

  • Not found.

SINTEC MULTI FREEZE

High-quality antifreeze at an affordable price that will last longer than the established period and will not harm the engine. The great popularity of the product is due to the excellent price-quality ratio, which is at the level of branded manufacturers. Another advantage of this product is its compatibility with many fluids, so it can be topped up without any problems. Compatible with all vehicles with old and new engine types. Organic and inorganic additives are present. Does not oxidize metal elements, which has a positive effect on the operation of the machine.

Sold at a price of 470 rubles.

SINTEC MULTI FREEZE

Advantages:

  • Good protection of metal elements at high temperature loads;
  • Can be used for most types of engines;
  • Even after 5 years of active work, it will not leave a single trace of scale;
  • The ability to combine with other antifreezes;
  • Extends the service life of the pump.

Disadvantages:

  • Not found.

AGA Z42

High-quality “anti-freeze” at an affordable price, which will provide reliability and protection for many cars. Sold in green, has a VGA approval index - G12. Compatible with both foreign car brands and AvtoVAZ, which is a big plus. The minimum temperature for boiling is 123 degrees, and the product will not freeze until the value drops below -42 ° C. The type used is carboxylate. Another advantage of the AGA Z42 is its durability.

The average cost is 175 rubles.

AGA Z42

Advantages:

  • Minimum cost;
  • Durability;
  • Suitable for AvtoVAZ;
  • Boils at 120 ° C.

Disadvantages:

  • No anti-corrosion properties.

FELIX Carbox -40

An excellent product that is popular with many motorists. Sold in red. Type - carboxylate. The minimum value for boiling is 110 degrees. G12 + tolerance index, which allows the product to be used in many cars of the brands Audi, Mercedes-Benz, Opel, Ford, etc. Also on the positive side is the popularity of the product and its cost.

The average price is 150 rubles.

FELIX Carbox -40

Advantages:

  • Good heat dissipation;
  • Positive reviews;
  • Does not corrode the cooling system;
  • Common product;
  • Low price.

Disadvantages:

  • Not found.

Finally

If a person wants to extend the life of his vehicle, then it is impossible to try to save money and ignore the tolerances when choosing antifreeze. If you have experience using the models described in the rating, or more interesting representatives, tell us about it in the comments.

LEAVE A REVIEW

Please enter your comment!
Please enter your name here