The best pedicure machines for 2020

A girl at any age wants to look well-groomed. There is often not enough time or money to visit a salon. The rhythm of a modern lady is so active that there is no time to take care of herself. Many people try to maintain the beauty of the legs at home. In order for the procedure not to take much time, but to be effective, you can buy a special device - a pedicure apparatus. It greatly simplifies this task, because it helps to quickly align the nail, eliminate burrs and dead skin.

This device can be seen in many beauty salons, but not every girl knows that she can be used at home on her own.

Basics of work

The pedicure machine helps to keep track of feet and toenails without the use of scissors or nippers. Thus, making the procedure safe.

It consists of several parts:

1. The basis is a handle.
2. The motor is built inside.
3. Slider speed control
4. Cord or batteries.

The package contains a set of nozzles. Routers are designed for a specific operation - removing cuticles, removing rough skin and removing old calluses. The expensive models have a small vacuum cleaner that helps to keep the area around clean and not breathe dust.

After turning on the device, it begins to rotate, thanks to which dry skin and cuticles are removed. The number of revolutions depends on the specific model - from 5000 to 60,000 per minute.

Simple rules for using the device

Before you start using your newly purchased device for the first time, you need to read the instructions or watch the training video. Recommendations in Russian should be on the box or inside it. Although such a device does not require a lot of training, the first time you use it, you need to know simple rules.

To easily remove the cuticle, it is best to treat it with a remover to soften it. For a start, it is better to use a diamond bit at a low speed. The sensations should not be painful, and the skin should not redden. If it has already happened, then the nozzle or speed is not selected correctly. You should not spend a long time in the same place. After application, apply oil to cuticles to soften the skin.

It should be carried out near the cuticle slowly and evenly. In case of damage, it is better to stop the procedure and repeat it only after a few days. The first time can be difficult, but everything comes with experience.

After removing the cuticle, you should change the attachment and polish the nail. To do this, you do not need to bring the cutter close, it is enough to move along the surface and not linger.

Use a rubber base to remove dry heels and calluses. If there are cracks, a needle cutter will do, but use it with extreme care.

Kinds

For home use

A large number of girls do not do hardware pedicure at home, because the process takes a lot of time. But not all of them know that a small device will help to make the nails well-groomed in 20-30 minutes.You no longer need to waste time on the road and the procedure itself in the salon.

A beginner who has never done a pedicure on his own needs to pay attention to models with a low speed. Optimally - up to 20,000. Such devices cannot damage the skin or overdo it.

You can take it with you on a trip and independently maintain the beauty of the legs. There are several attachments in the arsenal that help to polish the nail. This is how you get the perfect pedicure at home.

Simple devices work from batteries or a network cable.

Another positive point is its light weight and comfortable shape. So the procedure gives only pleasant sensations.

Professional

The second type is professional. Their difference is in a higher price and power from 60 watts and above. This option is used in expensive salons by craftsmen who are previously trained. The set may include a small vacuum cleaner and often has a function - protection against unwanted overheating. For a beginner who does not have basic skills, this is not the best option because they take up a lot of space and are not suitable for home use.

The main advantages are durability and reliability.

The kit includes several attachments. They are enough for a large number of clients.

Tips for choosing

Before the first purchase, girls often do not know what to look for. If you make a purchase in a store, a consultant can help. But when choosing on the Internet, making a choice yourself is not so easy.

1. Power and rotational speed. These two parameters are basic, so you should definitely pay attention to them. If a girl wants to use the device only for herself, then a device for 20-30 thousand revolutions and up to 60 W. For professionals, you can watch models up to 40 thousand revolutions and up to 100 W.
2. Assembly, materials and shape of the handle. The device should sit comfortably in your hand and not slip. The parts must be made of durable material, otherwise the device will only last for a short period of time.
3. Weight. If it is too heavy, the hand will get tired quickly. The optimal weight for home use is up to 200 grams. Before buying it is better to try to hold the device in your hand.
4. Before buying, it is worth examining the attachments that are included in the kit.
5. The model is better that it had a collapsible handle, then it will be possible to change parts during use.

Before buying, you need to turn on the device and check its operation. A good machine will vibrate a little, but not try to jump out of the hand. Now there are a lot of Chinese counterparts on sale, which may not cope with their task qualitatively.

Differences between an expensive router and a cheap one

For beginners, it may be completely incomprehensible why one model costs 1000 rubles, and the other is 10 times more. What are their differences?

• The quality of the materials from which the car is made.
• The number of functions that can be used.
• Nozzles. In budget models, there are often not high-quality cutters that will have to be bought separately.
• Number of revolutions. In models up to 1000 rubles, it may not coincide with those stated on the package. Cheaper models are often not made for removing some coatings, such as gel polish, but do well with a pedicure.
• Life time.

Additional options

Before buying, you need to study the additional capabilities of the pedicure device.

1. Overheating protection is a feature that will help keep your device running for years to come.
2. Backlight. This option is rather useless, because the pedicure is best done in good lighting, and not when a small light is on.
3. The presence of a vacuum cleaner. In such cases, the mobility of the device is lost, but this feature is very useful for home use.
4. The handy mode speed switch is an essential feature to help you pedicure the finest nails. Often girls suffer from such a problem on their feet.

Nozzles included

Even the set to the most budget device comes with at least two nozzles. Types of cutters and nozzles:

1. The attachment you need is a cuticle cutter. She gently lifts it from the nail and removes it.With the correct procedure, the girls note that there is no discomfort, and the cuticle grows much slower.
2. Flat attachment for calluses and dry skin. It does the job much better than any penza or file.
3. A cone-shaped cutter that is necessary to combat a problem such as an ingrown toenail.
4. A polishing cutter that gives nails a well-groomed look and healthy shine.
5. Cylinder cutters that are essential for thick nails. Used for pedicure.
6. The brush is the final step.

If required, attachments can be purchased separately.

Cutters

There are three types of material that can be used to make cutters.

1. Ceramic. This option is best considered for beginners who are just getting started with this device. They gently remove the stratum corneum of the skin, therefore they are safe. In order to determine the hardness, just look at the shade. Hard - black, medium - white, pink or blue - the softest. Such cutters are used for removing corns, cracks, processing the cuticle, side ridges and the nail plate.
2. The second type is diamond. Such cutters are most often used for the free edge of the nail plate, as well as for the removal of cuticles and small calluses. The advantages are budget cost and durability. To determine the hardness, just look at the color: yellow, red, green - soft and medium, black - hard.
3. For natural nails or those that have been covered with acrylic, the third option of cutters is suitable - silicone.

Top manufacturers

When choosing a device, you should look at the company that made it. You should not choose a manufacturer that is little known. Always read reviews from other users. For whatever unpleasant situations may happen, consider reliable manufacturers who have been on the market for several years.

• POLARIS

A renowned company all over the world that specializes in the development of small household appliances and kitchenware. The Swiss brand meets all the requirements, therefore it is in demand. For an affordable cost, the client gets excellent quality and modern design.

• Scholl

The most famous brand. Every girl has heard about him. Although the foot care technique is not the cheapest on the market, it is appreciated by customers for its durability and effectiveness.

• Rowenta

The brand has been on the market since 1909, so it was able to win a large number of satisfied customers. Roventa technology combines incredible technical capabilities, sophisticated design and long service life. It was created to make life easier for a large number of people.

• Vitek

The Russian trade mark appeared on the market back in 2000. Vitek can be attributed to the budget category, but the technology is not inferior in its properties to more expensive counterparts.

• Podomaster

Podomaster is a company from Germany that specializes in the creation of quality manicure and pedicure machines. The brand is in demand by a large number of craftsmen all over the world.

Rating of the best pedicure machines

Budget

GA.MA GSP0803

The GA.MA GSP0803 device is ideal for girls who want to get excellent results in a few minutes. The compact set is made in a beautiful pink shade, so every girl will like it. It is convenient to take it with you on a trip. The set includes a cone-shaped cutter for polishing and shaping nails, as well as for lifting and removing cuticles. The tips are made of durable sapphire-coated metal, so they will last for many years. The kit is made in the form of a small box with a lid. The handle has a comfortable shape, so it does not slip in the hand during operation. There is a convenient adjustment button.

GA.MA GSP0803 works both from the battery - up to two hours, and from the network.

Advantages:

Disadvantages:

Scarlett Vita Spa SC-MS95006

An excellent budget option for creating a pedicure at home is the Scarlett Vita Spa SC-MS95006. The girls celebrate its cute design, which has won the hearts of many.

The set includes 6 attachments with a detailed description and the handle itself. It is packed in a beautiful pink box with a transparent lid. There are 5 speeds that can be easily adjusted.

Weight - 200 grams, so it is suitable for travel.

The average price is 600-700 rubles.

Advantages:

Disadvantages:

Middle price category

Irisk JD-400

Ideal for both manicure and pedicure. The device consists of a handle with a nozzle and a small control unit. The cord is quite long - 2 meters, so it is convenient to use the device anywhere. A special stand helps to store the machine correctly during operation.

There are 4 attachments. This model was made in China, but this did not affect the durability of the device in any way.

Advantages:

Disadvantages:

Strong 90N 102

The ideal device for creating a pedicure at home. This model has several attachments, the replacement of which takes 5-7 seconds.

The device works from 110 to 220 V. It is worth noting the quiet operation

The device can work for 12-13 hours without any problems, then this option is suitable for professional nail workshops. In case of overload, there is a protective shutdown function.

Includes handpiece holders, foot pedal and maintenance kit. In cases of minor damage, you can repair them yourself.

Advantages:

Disadvantages:

Premium class

Brillian Black 30,000 rpm

The unusual appearance attracts the attention of all girls. It refers not only to functional things, but also very stylish. The body is made in a beautiful black color.

The handle of the device weighs only 168 grams, so during operation the process brings only pleasant sensations. The controls are intuitive and do not require training to use.

One of the important advantages is the quiet operation, although the device has a speed of up to 30 thousand rpm. The tip does not heat up.

Powered by a network. Power - 65 W.

Advantages:

Disadvantages:

Podomaster Classic 30000

The Podomaster is made in Germany. This model differs from all in the rating in that it belongs to professional equipment and is intended for use in the salon. Many craftsmen note durability and high-quality sound insulation.

The oval handle weighs less than 100 grams and is made of non-slip material.

The kit includes a vacuum cleaner with an antibacterial bag, which needs to be changed every six months. Its replacement takes only 7-10 seconds.

Power - 50 W. The rotation speed is 30 thousand revolutions per minute.

Advantages:

Disadvantages:

Caring for the device

In order for the machine to serve for several years, simple operating rules must be followed:

1. Wipe only with a soft cloth that does not damage the case.
2. All dust must be removed after each use.
3. It is best to clean the attachments with a plastic brush with soft bristles. Then rinse with water and put in a sterilizer.
4. It is necessary to store cutters in a closed case.

If you follow these recommendations, then the pedicure machine will delight its owner for more than 5 years. This depends on the manufacturer and the materials used. The average service life of the motor is 7 years.During this period, you will be able to save a good amount of money, because there will no longer be a need to visit spa treatments for your feet and spend it on something you need.