Best acrylic bathtubs for 2020

Acrylic bathtubs are the best alternative to cast iron material. Demand for them is growing every day. Recently, this design was considered a luxury. But now all consumers can purchase the equipment.Therefore, the editors of the site "bestx.htgetrid.com/en/" have prepared recommendations for choosing high-quality products, and also ranked the best acrylic bathtubs for 2020.

What are they?

Cast iron

Their main feature is durability and strength. In the USSR, such products served people under 30 years old. No damage damaged the surface.

Cast iron retains temperature for a long time. The water poured into the container will remain warm for a long time. It also dampens the noise of water when filling the bowl.

Such baths are of different types: from rectangular to curly shapes. The normal depth is 40 cm.But some large products have an indicator of 50 cm.

The difference is also in the price. A cast iron bathtub can cost more than regular items. It all depends on the manufacturer, structure and quality of the enamel surface. The only disadvantage that can make the buyer refuse the product is weight. It can be up to one hundred kilograms.

You should also know that Spain and France make bathtubs with a thin coating. They are equal in strength to Russian-made goods. Easy to install because the height can be adjusted using the legs.

Steel

Enamel comes in different colors. Therefore, it is possible to choose a suitable shade to create an extraordinary bathroom interior with a small size. Steel will last less than cast iron products, it will keep heat worse and will warm up in a quick period of time. The bathtub makes a noise during filling, but this problem was eliminated. The rubber pads are simply glued on.

When making steel baths, stamping is used, using stainless steel as a semi-finished product. The most popular shape for steel products is the rectangle. Other shapes can be produced. Good products should have a wall thickness of at least 3.5 mm. After stamping, the enamel is applied. If done correctly, the bath will last a long time.

For buyers who do not like the heavy weight of cast iron structures, a steel bath is suitable. Its weight is several times less than a cast iron product. They are cheap and do not need additional care. There is no corrosion.

Acrylic

The main feature of this material is plasticity. Products made from it have the most bizarre configurations. This allows you to diversify the bathroom. The openings inside the product made it possible to sell designs with air massage, pneumatic control and other technologies.

The water temperature is well maintained, which cools down by only one degree in half an hour. The material is very light, its transportation and installation will not be difficult. Handling the structure with care, the surface will remain undamaged for a long time. But the disadvantage of acrylic is that it has low strength. Dropping a hard object onto the surface may cause damage. Scratches and defects can be removed with an aerosol.

According to statistics, every third bathtub purchased in Russian stores is acrylic.Such a high popularity is provided by the plasticity of the material, which means that it is possible to buy a bathtub of different shapes.

Kvarilovye

Better than acrylic. Quaril baths have all the advantages that acrylic products have. The strength is three times higher. But the weight is also several times greater. Good stability and comfortable handling. The price is asked for higher than for analogs from acrylic.

This type of bath has only recently hit the market. This is a modified material. To make a product, quartz sand is used. In addition, the developers managed to maintain plasticity.

What is the difference between cast iron and acrylic?

By form

Let's take cast iron as an example. There are only two options here. There is a rectangular and oval bathtub. More options are not provided because it is a fragile material. Complex shapes cannot be constructed.

Therefore, if you need a non-standard design, then you should take an acrylic product. They often come in curved shapes, which makes them unusual. For small rooms, for example, a triangle is suitable. This will save space.

The size

Acrylic bathtubs come in a wide variety. They can be large or small, narrow or wide, of great depth. Round or angular can be of different diameters, widths, heights or depths.

Corner products can have different directions and side lengths, round ones differ in diameter. Speaking of rectangular and oval products, the bowl is 70-170 cm wide, 120-190 cm long.

The convenience of use

Here it is better to take a closer look at the degree of comfort of the materials. The first is temperature. It is necessary that the degree remains as long as possible. Cast iron does an excellent job with this. But acrylic also has the property of keeping water warm. Steel ones do not retain practically anything, moreover, they will ring during filling.

Cast iron bathroom walls never bend. So which bath is best for you? Acrylic or steel? Steel products do not loosen and can withstand the weight load. Acrylic is not capable of this. Its walls sag.

How to choose?

So what you need to pay attention to when choosing a product in order to find the right product. Selection advice and installation instructions are provided.

Many clients are interested in this. But not everyone knows what characteristics are characteristic of an acrylic bath. Experts believe that you first need to take a closer look at the side of the bath. It should not show through.

The surface of the bowl of quality material has a hard surface. You can verify this by pressing on the wall of the equipment.

But the main thing is to decide on the type of acrylic. There are several types of them: uniform injection molding and combined with plastic. But not every seller will tell the truth. You can find out yourself by looking at the side of the bath. Homogeneous acrylic is made from the acrylic and resin itself. The combination is a thin acrylic layer, thick ABC plastic with a reinforced coating.

A good bathtub will always have a uniform color, have a smooth bottom, on which an anti-slip coating is fixed. If you notice defects, then do not buy this product.

The molded coating has similar characteristics to glass, namely, fragility. Therefore, it is easy to split. These features must be taken into account during the selection of suitable equipment and its future operation.

Also, structures are made of multilayer material. This is a new generation of polymers with high strength compared to injection molded coatings. The multi-layer coating can maintain its shape for a long time, meeting international standards.

When choosing a bath, customer opinions can help. Many internet users praise this material. But you can often find a fake that does not guarantee quality and durability.

Therefore, it is worth choosing a certified product by checking the documents with the seller. A purchase should only be made with a guarantee that the manufacturer must give.

How to install?

These baths are installed quickly and without much difficulty, because the products are lightweight. It does not take a lot of time.You need to do the following:

1. Turn the structure upside down and put it on a cardboard surface;
2. Assemble the frame according to the instructions, fixing it to the bath;
3. Place the equipment on the legs near the installation site, adjust the height;
4. Place the bathtub in the desired place and check the flatness of the sides. Adjust the height of the legs relative to the height of the protective panel;
5. Fix the siphon, connect to the sewer;
6. Install the bath following the instructions provided;
7. Fill the gaps between the bathtub and the sides with silicone sealant.

To set the desired position for the equipment, it must be attached to the wall.

It is better to use a mounting kit for this. It comes with the bath. The package usually includes:

• Staples;
• Dowel;
• Screws;
• Hairpins.

Other adaptations may be offered.

Rating of the best acrylic bathtubs 2020

Here are collected inexpensive and budget goods, according to buyers - the best on the market.

BAS Nicole

The perfect balance between price and quality. Dimensions are 160 × 120 cm. Height is 50 cm. Can be installed even in a narrow room. The bowl is diagonal and has an angular design. Because of this, its volume seems to be increased several times. On the one hand, the bathtub is wide, the other part of the structure has a narrowing.

The bottom is slightly grooved. This helps to resist in soapy water. Supplied with pressure retaining frame. The mount fixes the bottom and sides. Attached is a shelf where you can put the shampoo. Electronically controlled model. The jets are included that can massage the back.

Pros:

Minuses:

Cersanit Balinea 150 × 70

Made of high quality acrylic. Thickness - 4 mm. The overflow is in the leg area. The structure is fixed to the wall. The shape is rectangular. The temperature lasts more than an hour. Suitable for a regular bathroom.

Advantages:

Disadvantages:

Cersanit Balinea UAZBR1000791296 170 × 70

Made of sanitary acrylic, high quality certified. The surface is snow-white and smooth, has no pores. Keep warm, durable compared to other models. Legs and wall mounts included.

Pros:

Minuses:

Cersanit SANTANA 170

The construction is produced in unusual dimensions, which makes it fit into any interior. The kit is a frame where the model is installed, a screen and a siphon with an overflow system. The equipment is made on the basis of injection molded acrylic, there is a reinforced frame, which allows you to keep the initial shape for a long period. You can also buy a bathtub of any color.

The device is guaranteed for 10 years. You can sit on one side of the tub. The bathtub has a headrest, wide sides, where you can easily put items.

Advantages:

Disadvantages:

Roca Hall 170 × 75

A foreign-made model will suit any interior. The bath has a base of 100% cast acrylic, the thickness of which is 5 mm. Additionally, the surface of the bath is covered with a reinforced layer, the bottom has a second insert, due to which the strength is increased. The kit includes a frame. It is made of stainless steel pipe. Even if you pour water on it, it will not rust.

It is also possible to order a system with hydromassage. The device has a long service life and a high guarantee. The structure can be easily installed in large and small rooms.

Pros:

Minuses:

BELLRADO GLORIA

The domestically produced model is reinforced with a frame, which adds rigidity to the device. The construction is made of modern acrylic, has a minimum thermal conductivity. Hot water almost does not cool down. No filling noise. The grooved bottom will prevent slipping. The equipment has an intensive massage regulation and electronic control. Versatile design. It is necessary to think over its installation in advance. The set includes a frame, a screen and a waste-overflow system.

Advantages:

Disadvantages:

GEMY G9083

Among the baths - one of the most expensive models at an average price. But it is justified: 280 liters are placed inside the equipment. The hydromassage pump has a power of 1 kW with an additional ozone function. Electronic control, massage functions can be configured. The surface is covered with a thin acrylic sheet that can withstand heavy loads for a long time. Also the depth is 72 cm.

Large dimensions allow two people to fit inside. The device is attractive in appearance. It has multi-color backlighting. In addition to the hydromassage system, a control panel is provided. Additional functions are provided: radio, the ability to call through a landline telephone, a built-in refrigerator and a TV with a removable front panel and underwater lighting. Also, a mixer with a spout, a headrest, which allows you to relax, is provided to the bath.

Pros:

Minuses:

RAVAK BEHAPPY 150 × 75

Perfectly suits the interior of a compact room. The kit consists of fasteners, also drain and overflow. There is an instruction where installation rules are written in detail with a description of each step. This allows you to independently install the bath. A decorative screen goes to the device, covering unnecessary places: the frame and other details. The screen is easily removable and can be inspected by making repairs.

Maintenance is quite simple and does not take much time. No detergents required. The original shape: one side has a wide base, at the other end it becomes narrow, which saves free space.

Benefits:

Disadvantages:

conclusions

An overview of acrylic bathtubs makes it possible to get acquainted with the best manufacturers of goods, selection criteria and the capabilities that modern products are equipped with. The popularity of acrylic bathtubs is provided mainly by the fact that among them you can choose an option for rooms of various dimensions, there is a wide selection of shapes and additional functions. Which product is better to buy or which company is better - the client decides. And what is important for you when choosing an acrylic bathtub !? Let us know in the comments.