The best gas cutters for professionals and hobbyists for 2020

Starting the article, it is worth saying a few words about the gas cutter in general. Simply put, a gas cutter is a cross between a hand-held circular saw and a grinder, powered by gasoline, designed for cutting various hard materials. This professional tool cuts metals and metal structures, concrete and reinforced concrete, stones, graphite, bricks and cinder blocks. It is used by road services for cutting curbs and concrete blocks, as well as for asphalt. Builders use the device to cut floors and walls, for example, to create and correct window openings or equip a new door.

How to choose a gas cutter

To choose a tool, relying not on simple advice, but on our own understanding, we will consider what gas cutters are in principle. To do this, you need to understand the purpose of various types of devices, depending on their design and characteristics. Although most of these divisions are rather symbolic.

Power division

Material	Index
For metal	The power of the device does not exceed 4200 W (~ 6 HP)
On concrete	Power from 4300 W. Disk rotation speed in the region of 4700 rpm
Universal	Have the highest power and disk rotation rates

Specialized models

Name	Feature
Wall chaser	This is a tool for construction professionals. Supplied with two diamond discs. Used for cutting ditches for laying pipes and wires
Rail cutter	Has a special mechanism that fixes the position of the tool on the rail
Chromium-plated	For better visibility in the dark and other conditions of reduced visibility, it is equipped with a chrome cover. It's no different anymore. Used primarily by lifeguards

By the shape of the cutting blade

A type	The form
Disk	The most common type of device. Has a disc-shaped cutting blade
Chain	Visually similar to a chainsaw, but has a diamond chain designed for cutting stone and metal

By cutting type

Method	Influence
Dry	The disc is cooled by air flow. You cannot saw continuously with such a tool. After a minute of operation, the unit must be left idle for half a minute to cool down. This slows down the work, but also lowers the cost of the gas cutter
Wet	The disc is cooled by a stream of water directly during operation. The cut material is also wetted in one, thereby solving the problem of dust

By working time

Appointment	Working hours
Household	Not designed for continuous operation. A maximum of a couple of hours a day. And then intermittently. Most budget models
Semi-professional	Designed for a full working day, i.e. 8 hours of work per day
Professional	10 hours of work or more

Additional factors

What else should you pay attention to when choosing? These indicators can play a significant role.

Index	Features:
Weight	The tool weighs on average 10-13 kg. For weighty models, legs are included for a confident installation.It is also possible to equip the device with a special cart
Cutting depth	When buying, it should be borne in mind that it is recommended to select the cutting depth up to 20% more than necessary. Those. for a wall with a thickness of 200 mm, you should choose a gas saw with a cutting depth of 220-240 mm
Air purification system	Here the more the better. But for household filters, two filters are enough: External - coarse filter and internal - fine filter
Vibration damping system	Holding 10 kg of the shaking sawing mass in your hands is not an easy task. The better the extinguishing system, the easier it will work
Fuel tank volume	Fuel consumption on various models ranges from half to one and a half liters per minute. Larger tank volume provides additional working time without refueling, increases the weight of the tool and facilitates the operation of the vibration damping system "two weights" at the same time
Additional functionality	There are many options. The hydraulic drive allows you to increase the power of the cutter without adding weight. Reduces noise and emissions in one step. The ability to relocate the blade or shroud may allow cutting directly against the wall. And the electronic ignition system and the semi-automatic start valve make it easier to start work

By price

As such, there is no price separation. But how much a tool costs is a factor that cannot be eliminated. Inexpensive models will cost about 30 thousand rubles. Professional models can cost three times as much. The average price fluctuates in the region of 50 - 55 thousand.

By manufacturer

The warranty and the availability of repair directly depend on this item. Moreover, each manufacturer introduces its own characteristics into the design. For example, the Swedish company Husqvarna has the patented X-Torq technology, which increases fuel economy by 20%, reduces emissions of harmful substances into the atmosphere and has more torque compared to similar engines.

Rating of the best gas cutters for 2020

Taking into account the characteristics of the work and the tool, it is quite possible to avoid mistakes when choosing. But there is one more point worth paying attention to. It can become a separate selection criterion. This is the popularity of the model in the buyer's opinion. For this, a rating of high-quality gas cutters has been compiled. Only the number of purchases of each of them, recommendations and reviews are taken into account. This overview lists popular models, gives a short description and photos of the tools.

Makita EK7650H 4 HP 300 mm

Belongs to the class of a professional tool. Cutting depth - 97 mm. Disk rotation speed - 4300 rpm. It is equipped with a 75.6 cm³ four-stroke engine with a power of 3000 W, which does not require the manufacture of a fuel mixture. It also has electronic ignition with a spring recoil starter, an automatic decompression system, a priming primer, a quick start system. The ability to change operating modes using a combined switch is built in. It stands out for its low fuel consumption and reduced exhaust gases. The 1.1L fuel tank is designed with patented technology to prevent fuel leakage when tilted. The weight of the filled device, ready for use, is 12.9 kg. The tensioning belt is simply adjusted with a screwdriver. No additional tool required to change the filter. Equipped with a spring vibration damping system. There is an adapter for connecting water.

Price - 51 500 ₽

Advantages:

Disadvantages:

Husqvarna K 1270-16 5800 W 7.8 HP 400 mm

One of the most powerful gas cutters on the market. Its two-stroke engine has a power of 5800 W (7.8 hp) and a volume of 118.8 cc. The X-Torq system reduces fuel consumption by 20% and reduces emissions by up to a quarter of comparable engines. The Active Air Filtration triple filter system is highly efficient and eliminates maintenance concerns for one year of dry cutting. The weight of the device without the cutting disc is 13.3 kg.The versatile design of the tool makes it suitable for cutting cast concrete as well as metal and asphalt. The volume of the fuel tank is 1.25 liters. The saw is equipped with an easy start system, a carburetor with automatic filter compensation to reduce noise and fuel consumption, a reversible cutting arm that allows cutting close to surfaces, and a DEX dust suppression system for a clean cut with less water. The anti-vibration system reduces vibration to less than 5 m / s2. The transmission is sealed and protected from dirt and dust. Cutting depth - 150 mm, disk rotation speed - 2700 rpm, diameter - 400 mm.

Price - 75 820 ₽

Advantages:

Disadvantages:

Makita EK6101 3200 W 4.3 HP 350 mm

Quite light and quiet model, in comparison with other gas cutters: 8.8 kg and 97 dB, respectively. The 3200W engine is equipped with SAS, which reduces fuel consumption and exhaust emissions, making it convenient for working indoors. The exhaust of gases is directed to the cutting area, which reduces the amount of dust in the working area. The small fuel tank of 0.7 l has an inspection window and opens vertically for easy inspection and refueling. The ribbed self-tightening belt improves transmission efficiency. Changes in water pressure are possible. Otherwise, it is similar to its counterparts in its price segment - a diaphragm carburetor, electronic ignition and a mechanical starter. Cutting depth - 130 mm, disc rotation speed - 4400 rpm. Diameter - 350 mm.

Cost - 50 028 ₽

Advantages:

Disadvantages:

STIHL TS 420 3200 W 4.4 HP 350 mm

In fact, this device does not stand out much among its closest analogues. 3200 W (4.4 HP) engine with 66.7 cc displacement³... The rotation speed of the disk is 4880 rpm. Fuel tank with a volume of 0.71 liters. Cutting depth - 125 mm. Disc diameter up to 350 mm. The relatively low weight of 9.6 kg and the vibration damping system makes it comfortable for manual work, which is also facilitated by the reduced jerk at engine start.

Price - 55 990 ₽

Advantages:

Disadvantages:

Makita EK7651H 3000 W 4.02 HP 355 mm

Weighty enough gas cutter - 13 kg. With this in mind, the tool is equipped with two guide rollers. It is also equipped with a four-stroke engine. 3000 W engine (4.02 HP), 75.6 cc displacement³... Reduced fuel consumption and air emissions. Rotation speed of a disk with a diameter of up to 350 mm - 4300 rpm. Equipped with a five-stage air filtration system.

Price - 61 544 ₽

Advantages:

Disadvantages:

Makita DPC7330 4200W 300mm

2-stroke engine with a power of 4200 W (5.6 hp) and a volume of 74 cm³... The rotation speed of the disc with a maximum diameter of 300 mm is 4300 rpm. The volume of the fuel tank is 1.1 l. Weight - 9.6 kg. The five-stage filtration system is specially designed for work in dusty conditions. The manufacturer notes the scrupulously translated instructions as a separate advantage. There is a quick start system, electronic ignition and a decompression valve.

Price - 38 630 ₽

Advantages:

Disadvantages:

Oleo-Mac 963 TTA-14 3000 W 4.1 HP 350 mm

Engine power - 3000 W (4.1 HP) with a volume of 63.3 cm³... The volume of the tank is 0.7 liters. at a flow rate of about 1.5 liters per hour.Cutting depth - 120, disc diameter - 350 mm. Disk rotation speed - 5100 rpm. Suitable for both metal cutting and asphalt or concrete cutting. Weight without disc 10.4 kg. The guard can be rotated 180 degrees for cutting near walls. Equipped with rollers for a sure and even cut. The multi-layer filter is designed for work in dusty conditions. In the future, the equipment does not differ much from its counterparts in this price category, but many user reviews indicate more stable operation of the equipment.

Price - 65 990 ₽

Advantages:

Disadvantages:

STIHL TS 800 5000 W 6.8 HP 400 mm

The powerful 5000 W (6.8 hp) two-stroke engine and blade speed up to 4300 rpm make the unit a very versatile tool, ideal for cutting any material. There is an easy start system ElastoStart. The maximum disc diameter is 400 mm. Cutting depth - 143 mm. The volume of the fuel tank is 1.2 liters. Equipped with a 3-stage intake air filtration system. Weight - 12.7 kg. Smooth adjustment of the flow rate of the washing and cooling liquid is possible due to the electronic water supply system included in the package. Has a semi-automatic belt tensioning system.

Price - 82 990 ₽

Advantages:

Disadvantages:

Husqvarna K 760 Cut-n-Break 5 HP 230 mm

The tool is equipped with two discs 230 mm in diameter, while the petrol saw is designed for a cutting depth of up to 400 mm. This is done in stages, with the removal of the cut out parts with a specially supplied crowbar. The cut is wide enough that it is well suited for laying cables or pipes. Like almost all cutters from this company, it comes with a wet cut function. Also inherent in the models of this company are the Air Purge quick start system, the X-Torq technology, which reduces fuel consumption and emissions into the atmosphere, the Active Air Filtration filtering system and the proprietary anti-vibration system. The starter made using DuraStarter technology requires almost no additional maintenance. The rotational speed of the disks is 2700 rpm. Equipment weight with disks - 9.8 kg. The power of the two-stroke engine is 3700 W (5 hp), with a volume of 73.5. The volume of the fuel tank is 0.9 liters.

Price - 103 850 ₽

Advantages:

Disadvantages:

The perfect gas saw from the best manufacturer

There is no unequivocal answer to the question of which company is better gas cutters. In the ranking above, the best manufacturers are already indicated, such as STIHL, Husqvarna and Makita, which are rightfully popular with both ordinary users and professional builders. Each of them has its own strengths and weaknesses, but in the end it turns out that the ideal, as always, is unattainable. But this does not mean that one should not strive for it. The main thing is to choose an instrument for those needs and types of materials for which a particular apparatus is ideally suited. Only these parameters will tell you which gas cutter is better to buy.